SilentKnight SK-5860, SK-5860R User Manual

5860 Remote Fire Annunciator

Wiring Connections

Installation Quick Reference

The optional Model 5860 Remote Annunciator, as shown
in Figure 1, can be surface or flush mounted.

Figure 1: Model 5860 Remote Annunciator

5860 installation involves the following steps:

1. Make sure power is off at the panel.

2. Annunciator is assembled at the factory. Disassemble
as needed.

3. Mount annunciator.

4. Wire annunciator to the panel. See

5. Use the DIP switches on the back of the 5860 to set
the annunciator ID. See Figure 4.

Wire the 5860 to the FACP as Shown in Figure 3.

Figure 3: SBUS Connections

Product

5820XL/5820XL-EVS 12 LS10061-001SK-E
5808 12 151274-L8
5700 8 151295

Max. 5860s

Allowed

For more

Information see

Manual PN

Figure 2: 5860 Parts

Figure 4: DIP Switch settings

P/N 151042 Rev C

ECN 14-0358

Model 5860 Installation Instructions

Mounting Holes

Mounting the 5860

This section describes mounting the remote annunciator.
The annunciator can be flush- or surface-mounted.

Figure 5: Annunciator Dimensions

Surface Mounting

The Model 5860TG (gray) and 5860TR (red) trim ring kits
are available for use when surface mounting.

Flush Mounting

This section of the manual describes flush mounting.
Follow these steps to flush mount the 5860:

Figure 6: Surface Mounting

2 P/N 151042 Rev C

Figure 7: Flush Mounting

ECN 14-0358