Samsung UE26C4000PW User Manual [ru]

				-LED
	Связывайтесь с SAMSUNG по всему миру			ТЕЛЕВИЗОР
	Если у вас есть предложения или вопросы по продуктам Samsung, связывайтесь с информационным центром Samsung.
	Страна	Центр поддержки покупателей	Веб-узел
	RUSSIA	8-800-555-55-55	www.samsung.ru
	Georgia	8-800-555-555	-	руководство
	Armenia	0-800-05-555	-
	Azerbaijan	088-55-55-555	-
	KAZAKHSTAN	8-10-800-500-55-500	-
	UZBEKISTAN	8-10-800-500-55-500	www.samsung.com/kz_ru
	KYRGYZSTAN	00-800-500-55-500	www.samsung.com
	TADJIKISTAN	8-10-800-500-55-500	www.samsung.com	пользователя
	UKRAINE	0-800-502-000	www.samsung.ua
			www.samsung.com/ua_ru
	Belarus	810-800-500-55-500	-
	Moldova	00-800-500-55-500	-

Производитель:

ООО «Самсунг Электроникс Рус Калуга», 249002, Калужская обл., Боровский р-н, д. Коряково, Первый Северный проезд, владение 1

© 2010 Samsung Electronics Co., Ltd. All rights reserved.	BN68-02655H-00

UE19C4000P

UE22C4000P

UE22C4010P

UE26C4000P

LED-ТЕЛЕВИЗОР

руководство пользователя

удивительные возможности

Благодарим за приобретение продукции компании Samsung. Для получения полного обслуживания зарегистрируйте свое устройство по адресу

www.samsung.ru/club/registration

Модель_______Серийный номер_______

[UC4000_19]BN68-02655H-RU.indb 1			2010-04-05 1:35:45

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

Digital TV notice

1.Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.

2.DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this specification. So, they cannot be workable at this moment.

3.Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.

4.Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business.

5.Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.

6.For more information, please contact your local Samsung customer care centre.

The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not.

Still image warning

Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

•Avoid displaying the same TV channel for long periods.

•Always try do display any image on full screen, use TV set picture format menu for best possible match.

•Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.

•Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.The appearance may differ depending on the product.

Installation with a stand.

Installation with a wall-mount.

10 cm

10 cm

10 cm

	10 cm
10 cm	10 cm
	10 cm

2English

[UC4000_19]BN68-02655H-RU.indb 2			2010-04-05 1:35:45

Contents

Getting Started

4

Connections

8

Basic Features

11

Advanced Features

23

Other Information

34

4Accessories

5Viewing the Control Panel

6Viewing the Remote Control

7Connecting to an Antenna

7Plug & Play (Initial Setup)

8Connecting to an AV Device

9Connecting to an Audio Device

10Changing the Input Source

11How to Navigate Menus

11 Using the INFO button (Now & Next guide)

11 Planning Your Viewing

13 Channel Menu

15 Picture Menu

17 Sound Menu

19 Setup Menu

21 Support Menu

23Connecting to a PC

24Media Play

30 Anynet+

34Analogue Channel Teletext Feature

35Assembling the Cables

35 Installing the Wall Mount

37Anti-theft Kensington Lock

37Securing the TV to the wall

38Troubleshooting

41Specifications

42Index

ENGLISH

Check the Symbol!

t

This function can be used by	Note	One-Touch Button
pressing the TOOLS button on the
remote control.

English 3

[UC4000_19]BN68-02655H-RU.indb 3			2010-04-05 1:35:46

Getting Started

Accessories

Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.The items’ colours and shapes may vary depending on the models.

Cables not included in the package contents can be purchased separately.

yy Remote Control & Batteries (AAA x 2)		yy	Cleaning Cloth
yy	Owner’s Instructions	yy	Power Cord
yy	Warranty Card / Safety Guide (Not available in some locations)

(M4 X L8)
yy Blanking Bracket & Screw (X1)	yy Holder-Ring (4ea)
(26 inch model Only)	(26 inch model Only)

yy Cable Tie

yy AV Adapter

yy Component Adapter

UE19C4000P, UE22C4000P / UE22C4010P

See separate guide for installing the stand.

yy Stand Base

UE26C4000P

See separate guide for installing the stand.

s		s
	s	s
		s

yy Holder-Wire stand (26 inch model Only)

yy Holder-Wire (3ea)

yy SCART Adapter

yy Stand Body

(A) 5EA (M4 X L12)

(B)	5EA (M4 X L8)

yy Stand (1EA)

yy Guide Stand (1EA)

yy Screws (10EA)

For best cable connection to this product, be sure to use cables with a maximum thickness as below:

yy Maximum thickness - 0.55 inches (14mm)

4English

[UC4000_19]BN68-02655H-RU.indb 4			2010-04-05 1:35:49

Viewing the Control Panel

The product colour and shape may vary depending on the model.

Getting Started01

Power Indicator

Speakers

Remote control sensor

Remote control sensor	Aim the remote control towards this spot on the TV.
SOURCEE	Toggles between all the available input sources. In the on-screen menu, use this
	button as you would use the ENTEREbutton on the remote control.
MENU	Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Y	Adjusts the volume. In the OSD, use the Ybuttons as you would use the
	◄ and ► buttons on the remote control.
z	Changes the channels. In the OSD, use the zbuttons as you would use the
	▼ and ▲ buttons on the remote control.
Power Indicator	Blinks and turns off when the power is on and lights up in standby mode.
P(Power)	Turns the TV on or off.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

English 5

[UC4000_19]BN68-02655H-RU.indb 5			2010-04-05 1:35:49

Getting Started

Viewing the Remote Control

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and Volume buttons.

Turns the TV on and off.

Selects the HDMI mode directly.

Have direct access to channels.

Alternately select Teletext ON, Double,

Mix or OFF.

Adjusts the volume.

Opens the OSD.

Displays Media Play (USB) (p. 24).

Quickly select frequently used functions.

Selects the on-screen menu items and changes the values seen on the menu.

Returns to the previous menu.

These buttons are for the Channel Manager,

Media Play (USB) menu, etc.

Use these buttons in Media Play (USB) and Anynet+(HDMI-CEC) modes (p. 24, 30).

( : Controls recording for Samsung recorders that have the Anynet+ feature)

Installing batteries (Battery size: AAA)

6English

POWER	SOURCE
HDMI	Displays and selects the available video
	sources. (p. 10)

Returns to the previous channel.

TTX/MIX			PRE-CH
				Cuts off the sound temporarily.
				Changes channels.
	CH LIST			Displays channel lists on the screen
		MENU
				(p. 13).
MEDIA.P			GUIDE	Displays the EPG (Electronic Programme
				Guide) (p. 11).
			INFO	Displays information on the
				TV screen.
RETURN			EXIT	Exits the menu.
A	B	C	D
P.MODE	S.MODE		DUAL	P.MODE: Press to select the picture
				mode (p. 15).
AD		P.SIZE	SUBT.	S.MODE: Press to select the sound

mode (p. 17).

DUAL f-g: Sound effect selection (p. 19).

AD: Turns the audio description on and off (p. 18). This is not available in some locations.

P.SIZE: Selects the picture size (p. 16). SUBT.: Displays digital subtitles (p. 20).

NOTE

xx Use the remote control within 23 feet from the TV.

xx Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs.

xx The colour and shape may vary depending on the model.

[UC4000_19]BN68-02655H-RU.indb 6			2010-04-05 1:35:50

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.Preset: Connecting the mains and antenna.

If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly.

VHF/UHF Antenna

Cable

or

ANT OUT

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Input source is set to TV.

To return to the previous step, press the Red button.

1	Selecting a language
2	Selecting Store Demo
	or Home Use
3	Selecting a country
4	Selecting an antenna
5	Selecting a channel
6	Setting the
	Clock Mode
7	Time Zone
8	Viewing the HD
	Connection Guide.
9	Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTEREbutton.		POWER
Select the desired OSD (On Screen Display) language.		P
Press the ◄ or ► button, then press the ENTEREbutton.
y	Select the Home Use mode. Store Demo Mode is for retail
	y environments.

yy To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTEREbutton.

Select the appropriate country. If the desired country does not exist on the menu, select Others. Press the ▲ or ▼ button, then press the ENTEREbutton. Select Air or Cable.

Press the ▲ or ▼ button, then press the ENTEREbutton.

Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Store (p.13).

Press the ENTEREbutton at any time to interrupt the memorization process. Set the Clock Mode automatically or manually.

Press the ▲ or ▼ button to select Auto, then press the ENTEREbutton.

Press the ▲ or ▼ button to select the your time zone, then press the ENTEREbutton (depending on the country).

The connection method for the best HD screen quality is displayed.

Press the ENTEREbutton.

If You Want to Reset This Feature...

Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.

Getting Started01

English 7

[UC4000_19]BN68-02655H-RU.indb 7			2010-04-05 1:35:51

Connections

Connecting to an AV Device

Using an HDMI or HDMI/DVI Cable: HD connection (up to 720p/1080i)

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB)

DVD

R

W

Red White

DVD

AUDIO OUT

R-AUDIO-L

HDMI OUT	DVI OUT

HDMI IN 1(DVI), 2, PC/DVI AUDIO IN

xx When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the PC/DVI AUDIO IN jacks for audio.

xx If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal Colour).

xx If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade.

xx It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a connection error may occur.

Using a Component (up to 720p/1080i) or Audio/Video (480i only) and Scart Cable

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

Blu-ray player

DVD

VCR

EXT

R

B

G

R

W

Y

R

W

Red Blue Green Red White Yellow Red White

COMPONENT OUT

AUDIO OUT

AUDIO OUT

VIDEO OUT

PR	PB	Y	R-AUDIO-L		R-AUDIO-L
R	B	G	R	W	R	W	Y
R
B
G
R
W
Y

In Ext. mode, DTV Out supports MPEG SD Video and Audio only.

To obtain the best picture quality, the Component connection is recommended over the A/V connection.

If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly.

8English

[UC4000_19]BN68-02655H-RU.indb 8			2010-04-05 1:35:53

Connecting to an Audio Device

Using an Optical (Digital) or Headphone Connection

Available devices: digital audio system, amplifier, DVD home theatre

digital audio system

OPTICAL

DIGITAL AUDIO OUT (OPTICAL)

xx When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

xx When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.

Headphones H: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.

xx Sound function may be restricted when connecting headphones to the TV. xx Headphone volume and TV volume are adjusted separately.

English 9

Connections 02

[UC4000_19]BN68-02655H-RU.indb 9			2010-04-05 1:35:53

Connections

CONNECTIONS COMMON INTERFACE Slot

To watch paid channels, the “CI or CI+ CARD” must be inserted.

yy If you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”.

yy The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

yy When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.

NOTE

xx You must obtain a “CI or CI+ CARD” from a local cable service provider.

xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.

xx Insert the “CI or CI+ CARD” in the direction marked on the card.

xx The location of the COMMON INTERFACE slot may be different depending on the model.

xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. xx If you have any problems, please contact a service provider.

xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

Changing the Input Source

Source List

Use to select TV or an external input	SOURCE
sources such as a DVD / Blu-ray player /
cable box / STB satellite receiver.

■■ TV / Ext. / PC / AV / Component / HDMI1/DVI / HDMI2 / USB

In the Source List, connected inputs will be highlighted.

Ext. and PC always stay activated.

Edit Name

■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.

When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set to DVI PC or

DVI Devices mode under Edit Name.

10 English

[UC4000_19]BN68-02655H-RU.indb 10			2010-04-05 1:35:54

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.

		MENU
	MEDIA.P		3
	TOOLS	INFO
1
2	RETURN	EXIT	4

1ENTERE/ Direction button: Move the cursor and select an item. Confirm the setting.

2 RETURN button: Returns to the previous menu. 3 MENU button: Displays the main on-screen menu. 4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1	MENU m
2	▲ / ▼
3	ENTER E
4	▲ / ▼
5	◄ / ►
6	ENTER E
7	EXIT e

The main menu options appear on the screen:

Picture, Sound, Channel, Setup, Input, Application, Support.

Select an icon with the ▲ or ▼ button.

Press ENTEREto access the sub-menu.

Select the desired submenu with the ▲ or ▼ button.

Adjust the value of an item with the ◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.

Press ENTEREto complete the configuration.

Press EXIT.

Using the INFO button (Now & Next guide)

	The display identifies the current	INFO
	channel and the status of certain
	audio-video settings.

The Now & Next guide shows daily TV programme information for each channel according to the

broadcasting time.

yy Scroll ◄, ► to view information

for a desired programme while watching the current channel.

yy Scroll ▲, ▼ to view information for other channels. If you want to move to the currently selected channel, press the ENTEREbutton.

DEF		18:11 Thu 6 Jan
DTV Air	Life On Venus Avenue	18:00 ~ 6:00
15	Unclassified	EWatch
	No Detaild Information	Information
	Planning Your Viewing
Guide
The EPG (Electronic Programme		GUIDE
Guide) information is provided by

broadcasters. Using programme

schedules provided by broadcasters, you can specify programmes you

want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries

may appear blank or out of date depending on a channel status.

English 11

BasicFeatures03

[UC4000_19]BN68-02655H-RU.indb 11			2010-04-05 1:35:56

xx xx B

Basic Features

Using Channel View

Guide	2:10Tue1Jun
	DTV Air 800 five
	Home and Away
	18:00 - 18:30
	Drama
800 five	Dani is devastated when scott makes clear his views on marriage...

Channel View - TV

18:00 - 19:00

19:00 - 20:00

Today

27

Discovery

American Chopper

Tine Team

28

DiscoveryH&L

Programmes resume at 06:00

800

five

Home and...

)Family Affairs

Fiv...

)Dark Angel

24

price-drop.tv

No Information

16

QVC

QVC Selection

6

R4DTT

No Information

ViewMode

+24Hours

Ch.Mode

Information kPage

E Watch

1

2

3

4

5

6

Using Scheduled View

Guide

2:10Tue1Jun

DTV Air 800 five

Family Affairs

18:00 - 18:30

Drama

800 five

Tanya confesses all to a stunned Babs. Conrad is anxious to hear...

ScheduledView

18:300

Today

)Family Affairs

800

five

19:155

Today

)Dark Angel

800

five

ViewMode

Information

E Cancel

1

4

6

1 Red (View Mode): View the list of programmes that are playing now or coming up.

2 Yellow (+24 Hours): Viewing the list of programmes to be broadcasted after 24 hours.

3 Blue (Ch. Mode): Select the type of channels you want to display on the Channel View window. (All, TV,

Radio, Data/Other, My Channel 1~4)

4Information: Displays details of the selected programme.

5 k(Page): Move to next or previous page.

6ENTEREbutton

−− When selecting the current programme, you can watch the selected programme.

−− When selecting the future programme, you can reserve to watch the selected programme. To cancel the schedule, press the ENTEREbutton again and select Cancel Schedules.

12 English

Channel Manager

Delete or set favourites channels and use the programme guide for digital broadcasts. Select a channel in the

Channels, My Channels or Scheduled screen.

		c1	1futech
Channels	All	2	* 24ore.tv
	Radio	3	BBC World
	TV	15	abc1	r
	Data/Other	23	bid-up.tv
	Analogue	33	Boonerang
		32	Cartoon Nwk
		5	Class News
		4	\ Coming Soon
		27	Discovery
Air	Antenna B Zoom	Select	Sort kPage T Tools

■■ Channels: Shows the channel list according to channel type.

■■ *My Channels: Shows the group of the channel.

■■ Scheduled: Shows all the currently reserved programmes.

Using the colour buttons with the Channel Manager

Red (Antenna): Toggle among Air or Cable.

Green (Zoom): Enlarges or shrinks a channel number.

xx Yellow (Select): Select desired channels and press the Yellow button to set all the selected channels at the same time. The cmark appears to the left of the selected channels.

xx Blue (Sort): Change the list ordered by channel name or channel number.

xx k(Page): Move to next or previous page.

xx T(Tools): Displays the Channel Manager option menu. (The options menus may differ depending on the situation.)

Channel Status Display Icons

Icons Operations

A An analogue channel.

cA channel selected.

*A channel set as a Favourite.

( A programme currently being broadcast.

\A locked channel.

) A reserved programme.

[UC4000_19]BN68-02655H-RU.indb 12			2010-04-05 1:35:58

¦¦ Using Favourite Channels

* My Channels

(in Channel Manager) Shows all favourite channels.

■■ Edit My Channels t: You can set the selected channels to desired my channels group.

The “*” symbol will be displayed and the channel will be set as a my channel.

1.Select a channel and press the TOOLS button.

2.Add or delete a channel in the my channel groups you want among 1, 2, 3 and 4.

xx One or more groups can be selected.

3.After you have changed the settings, the channel list for each group can be viewed in my channels.

					c1				1futech
Channels		All			2			* 24ore.tv
		Radio			3		Lock		BBC World
		TV			15				abc1	r
							EditMyChannels
		Data/Other			23		TimerViewing
									bid-up.tv
		Analogue			33		EditChannelNumber
							Delete		Boonerang
					32				Cartoon Nwk
					5		SelectAll
									Class News
									d
					4			\ Coming Soon
					27				Discovery
Air		Antenna		Zoom		Select		Sort	kPage	T Tools
			B

Channel List

You can see all the channels searched.

CH LIST

Channel Menu

¦¦ Retuning Channels

Antenna (Air / Cable)

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Country

The PIN input screen appears. Enter your 4 digit PIN number. ■■ Digital Channel: Change the country for digital channels

■■ Analogue Channel: Change the country for analogue channels.

Auto Store

Scans for a channel automatically and stores in the TV.

Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears.

■■ Antenna Source (Air / Cable): Select the antenna source to memorise.

■■ Channel Source (Digital & Analogue / Digital / Analogue): Select the channel source to memorise.

When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels.

Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV.

If you select Quick, you can set up the Network,

Network ID, Frequency, Modulation and

Symbol Rate manually by pressing the button on the remote control.

Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual.

Network ID: When Network is Manual, you can set up

Network ID using the numeric buttons.

Frequency: Displays the frequency for the channel. (differs in each country)

Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates.

Manual Store

Scans for a channel manually and stores in the TV.

If a channel is locked using the Child Lock function, the PIN input window appears.

■■ Digital Channel: When scanning has finished, channels are updated in the channel list.

When selecting Antenna → Air: Channel, Frequency, Bandwidth

When selecting Antenna → Cable: Frequency, Modulation, Symbol Rate

■■ Analogue Channel (Programme, Colour System, Sound System, Channel, Search): If there is abnormal sound or no sound, reselect the sound standard required.

English 13

BasicFeatures03

[UC4000_19]BN68-02655H-RU.indb 13			2010-04-05 1:35:59

Basic Features

Channel mode

xx P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You

can select a channel by entering the position number in this mode.

xx C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

¦¦ Editing Channels

Channel Manager Option Menu

(in Channel Manager)

1.Select a channel and press the TOOLS button.

2.Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu.

■■ Edit Channel Name (analogue channels only): Assign your own channel name.

■■ Edit Channel Number (digital channels only): Edit the number by pressing the number buttons desired.

¦¦ Other Features

Cable Search Option

(depending on the country)

Sets additional search options such as the frequency and symbol rate for a cable network search.

■■ Freq.Start / Freq.Stop: Set the start or stop frequency (differs in each country)

■■ Symbol Rate: Displays available symbol rates. ■■ Modulation: Displays available modulation values.

Channel Manager

Channel Manager Option Menu

Set each channel using the Channel Manager menu options (Lock / Unlock, Timer Viewing, Sort, Delete, Select All /

Deselect All). Option menu items may differ depending on the channel status.

1.Select a channel and press the TOOLS button.

2.Select a function and change its settings.

■■ Lock / Unlock: Lock a channel so that the channel cannot be selected and viewed.

NOTE

xx This function is available only when the Child Lock is set to On.

xx The PIN input screen appears. Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.

■■ Timer Viewing: You can set a desired channel to be displayed automatically at the reserved time. Set the current time first to use this function.

When a digital channel is selected, press the ► button to view the digital Programme.

■■ Sort: (analogue channels only): This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.

■■ Delete: You can delete a channel to display the channels you want.

■■ Select All / Deselect All: Select all the channels or deselect all the selected channels in the channel manager.

Channel List Transfer

The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports the channel map. You should connect a USB storage to use this function.

■■ Import from USB: Import channel list from USB.

■■ Export to USB: Export channel list to USB. this function is available when USB is connected.

Scheduled

(in Channel Manager)

You can view, modify or delete a show you have reserved to watch.

■■ Change Info: Change a show you have reserved to watch.

■■ Cancel Schedules: Cancel a show you have reserved to watch.

■■ Information: Display a show you have reserved to watch. (You can also change the reservation information.)

■■ Select All / Deselect All: Select or deselect all reserved programmes.

Fine Tune

(analogue channels only)

If the signal is weak or distorted, fine tune the channel manually.

Fine tuned channels are marked with an asterisk “*”.To reset the fine-tuning, select Reset.

14 English

[UC4000_19]BN68-02655H-RU.indb 14			2010-04-05 1:36:00

Picture Menu

¦¦ Changing the Preset Picture Mode

	Mode
	Select your preferred picture type.	P.MODE
	■■ Dynamic: Suitable for a bright
	room.

■■ Standard: Suitable for a normal environment.

■■ Movie: Suitable for watching movies in a dark room.

¦¦ Adjusting Picture Settings

Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)

Your television has several setting options for picture quality control.

NOTE

xx In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R) function is not available.

xx In PC mode, you can only make changes to

Backlight, Contrast and Brightness.

xx Settings can be adjusted and stored for each external device connected to the TV.

¦¦ Economical Solutions

Eco Solution

■■ Energy Saving (Off / Low / Medium / High / Picture Off / Auto) t: This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.

■■ No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it's not receiving a signal.

Disabled when the PC is in power saving mode.

¦¦ Changing the Picture Options

Advanced Settings

(available in Standard / Movie mode)

You can adjust the detailed setting for the screen including colour and contrast.

In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance.

Advanced Settings

Black Tone	: Off	►
Dynamic Contrast	: Medium
Shadow Detail	: -2
Gamma	: 0
RGB Only Mode	: Off
Colour Space	: Native
White Balance
	▼
	UMove E Enter	R Return

■■ Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.

■■ Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.

■■ Shadow Detail (-2~+2): Increase the brightness of dark images.

■■ Gamma: Adjust the primary colour intensity.

■■ RGB Only Mode (Off / Red / Green / Blue): You can adjust Colour or Tint (G/R) of Red, Green or Blue for the picture from an external device (DVD player, home theatre, etc.).

■■ Colour Space (Auto / Native): Adjust the range of colours available to create the image.

■■ White Balance: Adjust the colour temperature for a more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.

Reset: Resets the White Balance to it’s default settings. ■■ Flesh Tone: Emphasize pink “Flesh Tone.”

■■ Edge Enhancement (Off / On): Emphasize object boundaries.

English 15

BasicFeatures03

[UC4000_19]BN68-02655H-RU.indb 15			2010-04-05 1:36:01

Basic Features

Picture Options

In PC mode, you can only make changes to the Colour Tone, Size and Auto Protection Time.

Picture Options

Colour Tone	: Normal	►
Size	:Auto Wide
Screen Mode	: 16:9
Digital Noise Filter	:Auto
MPEG Noise Filter	:Auto
HDMI Black Level	: Normal
Film Mode	: Off
	▼
	UMove E Enter	R Return

■■ Colour Tone (Cool / Normal / Warm1 / Warm2)

Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.

Settings can be adjusted and stored for each external device connected to an input on the TV.

■■ Size: Your cable box/satellite

receiver may have its own set of P.SIZE screen sizes as well. However, we

highly recommend you use 16:9 mode most of the time.

Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.

16:9 : Adjusts the picture size to 16:9 for DVDs or wide broadcasting.

Wide Zoom: Magnifies the picture size more than 4:3.Adjusts the Position by using ▲, ▼ buttons.

Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.

Adjusts the Position or Size by using ▲, ▼ button.

4:3 : The default setting for a movie or normal broadcasting.

Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.

16 English

NOTE

xx Depending on the input source, the picture size options may vary.

xx The available items may differ depending on the selected mode.

xx In PC mode, only 16:9 and 4:3 modes can be adjusted.

xx Settings can be adjusted and stored for each external device connected to an input on the TV.

xx After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Adjusts the Position or Size by using ▲, ▼, ◄, ► button.

xx If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function.

■■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.

Not available in PC, Component or HDMI mode.

■■ Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): When the broadcast signal is weak, some static and ghosting may appear. Select one of the options until the best picture is displayed.

Auto Visualisation: When changing analogue channels, displays the intensity of the current signal and defines the screen noise filter.

Only available for analogue channels.

■■ MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.

■■ HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.

Available only in HDMI mode (RGB signals).

■■ Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).

■■ Auto Protection Time (2 hours / 4 hours / 8 hours / 10 hours / Off): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.

[UC4000_19]BN68-02655H-RU.indb 16			2010-04-05 1:36:01

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

¦¦ Setting up the TV with Your PC

Set the input source to PC.

Auto Adjustment t

Adjust frequency values/positions and fine tune the settings automatically.

Not available when connecting with an HDMI/DVI cable.

Screen

■■ Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen.

■■ Position: Adjust the PC screen position with direction button (▲ / ▼ / ◄ / ►).

■■ Image Reset: Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.)

1.Click on “Control Panel” on the Windows start menu.

2.Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-box will appear.

3.Click on “Display” and a display dialog box will appear.

4.Navigate to the “Settings” tab on the display dialog-box.

yy The correct size setting (resolution) [Optimum: 1360 x 768 pixels]

yy If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.

Sound Menu

¦¦ Changing the Preset Sound Mode

Mode

■■ Standard: Selects the normal	S.MODE
sound mode.

■■ Music: Emphasizes music over

voices.

■■ Movie: Provides the best sound for movies.

■■ Clear Voice: Emphasizes voices over other sounds.

■■ Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.

¦¦ Adjusting Sound Settings

Equalizer

Adjusts the sound mode (standard sound mode only).

■■ Balance L/R: Adjusts the balance between the right and left speaker.

■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.

■■ Reset: Resets the equalizer to its default settings.

¦¦ Sound Systems, Etc.

Virtual Surround (Off / On)

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.

Dialog Clarity (Off / On)

(standard sound mode only)

This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly.

English 17

BasicFeatures03

[UC4000_19]BN68-02655H-RU.indb 17			2010-04-05 1:36:02

Basic Features

Audio Language

(digital channels only)

Change the default value for audio languages.

The available language may differ depending on the broadcast.

Audio Format

(digital channels only)

When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.

Audio Format option may differ depending on the broadcast. 5.1ch Dolby digital sound is only available when connecting an external speaker through an optical cable.

Audio Description

(not available in all locations) (digital	AD
channels only)

This function handles the Audio Stream

for the AD (Audio Description) which is sent along with the Main audio from the broadcaster.

■■ Audio Description (Off / On): Turn the audio description function on or off.

■■ Volume: Adjust the audio description volume.

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

■■ Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night.

Speaker Select (External Speaker / TV

Speaker)

A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.

When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.

When Speaker Select is set to External Speaker xx TV Speaker: Off, External Speaker: On

18 English

[UC4000_19]BN68-02655H-RU.indb 18

When Speaker Select is set to TV Speaker xx TV Speaker: On, External Speaker: On

If there is no video signal, both speakers will be mute.

Additional Setting

(digital channels only)

■■ DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level.

According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.

To increase or decrease the volume, adjust between the range 0 and -10 respectively.

■■ SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.

Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.

By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your interactive 3D sound experience.

Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).

■■ Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).

Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.

Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.

RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.

2010-04-05 1:36:02

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

¦¦ Selecting the Sound Mode

When you set to Dual f-g, the current
sound mode is displayed on the screen.	DUAL

		Audio	Dual f-g	Default
		Type
	A2	Mono	Mono	Automatic
		Stereo	Stereo  Mono	change
	Stereo
		Dual	Dual f Dual g	Dual f
		Mono	Mono	Automatic
	NICAM	Stereo	Mono  Stereo	change
	Stereo	Dual	Mono  Dual f	Dual f
			 Dual g

If the stereo signal is weak and an automatic switching occurs, then switch to the mono.

Only activated in stereo sound signal.

Only available when the Input source is set to TV.

Setup Menu

¦¦ Setting the Time

Time

■■ Clock: Setting the clock is for using various timer features of the TV.

OO The current time will appear every time you press the INFO button.

If you disconnect the power cord, you have to set the clock again.

Clock Mode (Auto / Manual)

Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.

The antenna must be connected in order to set the time automatically.

Clock Set: Set the Day, Month, Year, Hour and Minute manually.

Available only when Clock Mode is set to

Manual.

Time Zone (depending on the country): Select your time zone.

When Country is set to Others, you can use this function.

This function is only available when the Clock Mode is set to Auto.

¦¦ Using the Sleep Timer

■■ Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

To cancel Sleep Timer, select Off.

¦¦ Setting the On / Off Timer

■■ Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock first.

Timer 1

On Time

▲

00

00

Inactivate

▼

Off Time

Inactivate

00

00

Volume

Source

Antenna

Channel

10

TV

ATV

1

Repeat

Sun

Mon

Tue

Wed

Thu

Fri

Sat

Once

LMove

U Adjust

E Enter

R Return

On Time / Off Time: Set the hour, minute, and activate / inactivate. (To activate timer with the setting you’ve chosen, set to Activate.)

Volume: Set the desired volume level.

Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)

Antenna (when the Source is set to TV): Select ATV or

DTV.

Channel (when the Source is set to TV): Select the desired channel.

Contents (when the Source is set to USB): Select a folder in the USB device containing music or photo files

to be played when the TV is turned on automatically.

NOTE

xx If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly.

xx When there is only one photo file in the USB device, the Slide Show will not play.

xx If a folder name is too long, the folder cannot be selected.

xx Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.

English 19

BasicFeatures03

[UC4000_19]BN68-02655H-RU.indb 19			2010-04-05 1:36:04

Basic Features

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,

Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer.

The cmark indicates the day is selected.

Auto Power Off (available only when the TV is turned on by Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.

¦¦ Locking Programmes

Security

The PIN input screen appears before the setup screen.

Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.

■■ Child Lock (Off / On): Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme.

Available only when the Input source is set to TV.

■■ Parental Lock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a user-defined 4-digit PIN code. If the selected channel is locked, the “\” symbol will be displayed.

Allow All: Unlock All TV ratings.

■■ Change PIN: Change your personal ID number required to set up the TV.

If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to “0-0-0-0”: POWER (off) →

MUTE → 8 → 2 → 4 → POWER (on).

¦¦ Other Features

■■ Preference (Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language): Select a language, which will be the default language when a channel is selected.

Subtitle

Use this menu to set the Subtitle	SUBT.
mode.
■■ Subtitle (Off / On): Switches
subtitles on or off.

■■ Mode (Normal / Hearing Impaired): Sets the subtitle mode.

■■ Subtitle Language: Sets the subtitle language.

If the programme you are watching does not support the Hearing Impaired function, Normal automatically activates even if the Hearing Impaired mode is selected.

English is the default in cases where the selected language is unavailable in the broadcast.

Digital Text (Disable / Enable)

(UK only)

If the programme broadcasts with digital text, this feature is enabled.

Auto Run Data Service

Sets whether or not to automatically run data service. Auto Run Data Service automatically runs data service without user intervention.

If any other secondary function is under way, Auto Run Data Service may not work.

Language

■■ Menu Language: Set the menu language.

■■ Teletext Language: Set a desired language for teletext.

English is the default in cases where the selected language is unavailable in the broadcast.

20 English

General

■■ Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode.

[UC4000_19]BN68-02655H-RU.indb 20			2010-04-05 1:36:04

If none of these troubleshooting tips apply, contact the Samsung customer service centre.

NOTE

xx Precautions and limitations for game mode

−− To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.

−− If you display the TV menu in Game Mode, the screen shakes slightly.

xx Game Mode is not available when the input source is set to TV or PC.

xx After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality.

xx If Game Mode is On:

−−Picture mode is set to Standard and Sound mode is set to Movie.

−−Equalizer is not available.

■■ Menu Transparency (Bright / Dark): Se t the Transparency of the menu.

■■ Melody (Off / Low / Medium / High): Set so that a melody plays when the TV is turned on or off.

Common Interface

■■ CI Menu: This enables the user to select from the CAMprovided menu. Select the CI Menu based on the menu PC Card.

■■ Application Info: View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the TV is on or off.

1.Purchase a CI CAM module at your nearest dealer or by phone.

2.Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow.

3.Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns parallel with the slot.

4.Check if you can see a picture on a scrambled signal channel.

¦¦ Picture In Picture (PIP)

PIP t

You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.

NOTE

xx For PIP sound, refer to the Sound Select instructions.

xx If you turn the TV off while watching in PIP mode, the PIP window will disappear.

xx You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

xx PIP settings

	Main picture	Sub picture
	Component, HDMI1/DVI,	TV
	HDMI2, PC

■■ PIP (Off / On): Activate or deactivate the PIP function. ■■ Channel: Select the channel for the sub-screen.

■■ Size (Õ/ Ã): Select a size for the sub-picture.

■■ Position (Ã/ –/ —/ œ): Select a position for the sub-picture.

■■ Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode.

Support Menu

Self Diagnosis

Self Diagnostic might take few seconds, this is part of the normal operation of the TV

■■ Picture Test (Yes / No): Use to check for picture problems.

■■ Sound Test (Yes / No): Use the built-in melody sound to check for sound problems.

If you hear no sound from the TV’s speakers, before performing the sound test, make sure

Speaker Select is set to TV Speaker in the Sound menu.

The melody will be heard during the test even if

Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.

■■ Signal Information: (digital channels only) HDTV channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

■■ Troubleshooting: If the TV seems to have a problem,

refer to this description.

English 21

BasicFeatures03

[UC4000_19]BN68-02655H-RU.indb 21			2010-04-05 1:36:05

UMove E Enter R Return

TV Rear Panel

USB

USB Drive

Basic Features

Software Upgrade

Software Upgrade can be performed via a broadcasting signal or downloading the latest firmware from “www. samsung.com,” to a USB memory device.

Current Version the software already installed in the TV.Software is represented as “Year/Month/Day_Version”.

Software Upgrade

	Current Version	2010/01/18_000001
	By USB	►
	By Channel
	Standby Mode Upgrade	: Off
	Alternative Software	2010/01/15_00000

Installing the Latest Version

■■ By USB: Insert a USB drive containing the

firmware upgrade file, downloaded from

“www.samsung.com,” into the TV. Please

be careful not to disconnect the power or remove the USB

drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to to write down your settings so that you can easily reset them after the upgrade.

■■ By Channel: Upgrade the software using the broadcasting signal.

If the function is selected during the software transmission period, software will be automatically searched and downloaded.

The time required to download the software is determined by the signal status.

22 English

■■ Standby Mode Upgrade: A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the LED product. This phenomenon may continue for more than 1 hour until the software upgrade is complete.

■■ Alternative Software (backup): If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version.

If the software was changed, existing software is displayed.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software.

[UC4000_19]BN68-02655H-RU.indb 22			2010-04-05 1:36:06

Advanced Features

Connecting to a PC

Using an HDMI/DVI Cable or a D-sub Cable

AUDIO OUT

AUDIO OUT

DVI OUT

PC OUT

Advanced Features04

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1360 x 768 @ 60 Hz.

			Horizontal Frequency	Vertical Frequency	Pixel Clock	Sync Polarity
	Mode	Resolution			Frequency
			(KHz)	(Hz)		(H / V)
					(MHz)
	IBM	640 x 350	31.469	70.086	25.175	+/-
		720 x 400	31.469	70.087	28.322	-/+
	MAC	640 x 480	35.000	66.667	30.240	-/-
		832 x 624	49.726	74.551	57.284	-/-
	VESA CVT	720 x 576	35.910	59.950	32.750	-/+
		1280 x 720	56.456	74.777	95.750	-/+
		640 x 480	31.469	59.940	25.175	-/-
		640 x 480	37.500	75.000	31.500	-/-
		640 x 480	37.861	72.809	31.500	-/-
		800 x 600	37.879	60.317	40.000	+/+
		800 x 600	46.875	75.000	49.500	+/+
	VESA DMT	800 x 600	48.077	72.188	50.000	+/+
		1024 x 768	48.363	60.004	65.000	-/-
		1024 x 768	56.476	70.069	75.000	-/-
		1024 x 768	60.023	75.029	78.750	+/+
		1280 x 720	45.000	60.000	74.250	+/+
		1360 x 768	47.712	60.015	85.500	+/+
	VESA GTF	1280 x 720	52.500	70.000	89.040	-/+

NOTE

xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. xx The interlace mode is not supported.

xx The set might operate abnormally if a non-standard video format is selected.

xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

English 23

[UC4000_19]BN68-02655H-RU.indb 23			2010-04-05 1:36:10

Advanced Features

	Media Play
MEDIA.P	Enjoy photos, music and/or movie fi les saved on	MediaPlay
	a USB Mass Storage Class (MSC) device.

Videos

SUM ChangeDevice ViewDevices E Enter R Return

¦	Connecting a USB Device
1.	Turn on your TV.	TV Rear Panel

2. Connect a USB device containing photo, music and/or movie fi les to the

USB (HDD)

3. When USB is connected to the TV, popup window appears. Then you can select

Media Play.

It might not work properly with unlicenced multimedia files.

Need-to-Know List before using Media Play (USB)

USB

USB Drive

xMTP (Media Transfer Protocol) is not supported.

xThe file system supports FAT16, FAT32 and NTFS.

xCertain types of USB Digital camera and audio devices may not be compatible with this TV.

xMedia Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only

Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.

xBefore connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.

xConnect a USB HDD to the dedicated port, USB (HDD) port.

xDo not disconnect the USB device while it is loading.

xThe higher the resolution of the image, the longer it takes to display on the screen.

xThe maximum supported JPEG resolution is 15360X8640 pixels.

xFor unsupported or corrupted files, the “Not Supported File Format” message is displayed.

xIf the files are sorted by Basic View, up to 1000 files can be displayed in each folder.

xMP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation of content, the distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.

xIf more than 2 PTP devices are connected, you can only use one at a time.

xIf more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported.

xIf an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction.

xIf the TV has been no input during time set in Auto Protection Time, the Screensaver will run.

xThe power-saving mode of some external hard disk drives may be released automatically when connected to the TV.

xIf a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.

xIf a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection.

xIf a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC to permanently delete the file.

24 English

[UC4000_19]BN68-02655H-RU.indb 24			2010-04-05 1:36:11

¦¦ Screen Display

Move to the file you desired using the up/down/right/left buttons and then press the ENTEREor (Play) button. The file is played.

Supports the View Devices and Home in Media Play homepage.

Information: You can ascertain the selected

file name and the number of files and page.

Sort List Section: Displays sorting standard.

Sorting standard is different depending on the contents.

Videos		/Movie 01.avi					1/1 Page
		Movie 01.avi		Movie 02.avi
		Jan.10.2010					Jan.10.2010
		Movie 03.avi		Movie 04.avi
		Jan.10.2010					Jan.10.2010
		Movie 05.avi		Movie 06.avi
		Jan.10.2010					Jan.10.2010
		Movie 07.avi		Movie 08.avi
		Jan.10.2010					Jan.10.2010
		Movie 09.avi		Movie 10.avi
		Jan.10.2010					Jan.10.2010
SUM	ChangeDevice			Select			Sorting T Tools

File List Section:

You can confirm the files and groups that is sorted by each category.

Operation Buttons

Red (Change Device): Selects a connected device.

B Green (Preference): Sets the file preference. (not supported in Basic view)

Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol.

Blue (Sorting): Selects the sort list. TTools: Displays the option menu.

Using the (REW) or µ(FF) button, file list can move to next or previous page.

Videos

Playing Video

1.Press the ◄ or ► button to select Videos, then press the ENTEREbutton in the Media Play menu.

2.Press the ◄/►/▲/▼ button to select the desired file in the file list.

3.Press the ENTEREbutton or (Play) button.

−− The selected file is displayed on the top with its playing time.

−− If video time information is unknown, play time and progress bar are not displayed. −− During playing the video, you can search using the ◄ and ► button.

In this mode, you can enjoy movie clips contained on a Game,
	but you cannot play the Game itself.			00:04:03 / 00:07:38		1/1
yy Supported Subtitle Formats					Movie 01.avi
	Name		File extension	Format
	MPEG-4 time-based text		.ttxt	XML
	SAMI		.smi	HTML
	SubRip		.srt	string-based
	SubViewer		.sub	string-based
	Micro DVD		.sub or .txt	string-based
					SUM	EPause L Jump T Tools R Return

English 25

Advanced Features04

[UC4000_19]BN68-02655H-RU.indb 25			2010-04-05 1:36:12

Advanced Features

yy Supported Video Formats

	File Extension	Container	Video Codec	Resolution	Frame rate		Bit rate	Audio Codec
					(fps)		(Mbps)
			Divx 3.11 / 4.x / 5.1 / 6.0	1920x1080	6	~ 30	8
	*.avi	AVI	XviD	1920x1080	6	~ 30	8	MP3 / AC3 / LPCM /
	*.mkv	MKV	H.264 BP / MP / HP	1920x1080	6	~ 30	25	ADPCM / DTS Core
			MPEG4 SP / ASP	1920x1080	6	~ 30	8
			Divx 3.11 / 4.x / 5.1 / 6.0	1920x1080	6	~ 30	8
	*.asf	ASF	XviD	1920x1080	6	~ 30	8	MP3 / AC3 / LPCM /
			H.264 BP / MP / HP	1920x1080	6	~ 30	25	ADPCM / WMA
			MPEG4 SP / ASP	1920x1080	6	~ 30	8
	*.wmv	ASF	Window Media Video v9	1920x1080	6	~ 30	25	WMA
			H.264 BP / MP / HP	1920x1080	6	~ 30	25
	*.mp4	MP4	MPEG4 SP / ASP	1920x1080	6	~ 30	8	MP3 / ADPCM / AAC
			XVID	1920x1080	6	~ 30	8
	*.3gp	3GPP	H.264 BP / MP / HP	1920x1080	6	~ 30	25	ADPCM / AAC / HE-AAC
			MPEG4 SP / ASP	1920x1080	6	~ 30	8
	*.vro	VRO	MPEG1	1920x1080	24 / 25 / 30		30	AC3 / MPEG / LPCM
		VOB	MPEG2	1920x1080	24 / 25 / 30		30
			MPEG1	1920x1080	24 / 25 / 30		30
	*.mpg
		PS	MPEG2	1920x1080	24 / 25 / 30		30	AC3 / MPEG / LPCM / AAC
	*.mpeg
			H.264	1920x1080	6	~ 30	25
	*.ts		MPEG2	1920x1080	24 / 25 / 30		30
								AC3 / AAC / MP3 / DD+ /
	*.tp	TS	H.264	1920x1080	6 ~ 30		25
								HE-AAC
	*.trp
			VC1	1920x1080	6 ~ 30		25

Other RestrictionsNOTE

xx If there are problems with the contents of a codec, the codec will not be supported.

xx If the information for a Container is incorrect and the file is in error, the Container will not be able to play correctly.

xx Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.

xx If the Index Table is in error, the Seek (Jump) function is not supported.

	Video Decoder		Audio Decoder
• Supports up to H.264, Level 4.1		• Supports up to WMA 7, 8, 9, STD
•	H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not	•	WMA 9 PRO does not support 2 channel excess multi channel or
	supported.		lossless audio.
•	GMC is not supported.	•	WMA sampling rate 22050Hz mono is not supported.

•H.263 is not supported.

26 English

[UC4000_19]BN68-02655H-RU.indb 26			2010-04-05 1:36:13

Playing movie file continuously (Resume Play)

If you exit the playing Videos function, it can be played later from the point where it was stopped.

1.Select the movie file you want to play continuously by pressing the ◄ or ► button to select it from the file list section.

2.Press the (Play) / ENTEREbutton.

3.Select Play Continuously (Resume Play) by pressing the Blue

button. The Movie will begin to play from where it was stopped.The Blue button is available when resuming play.

If the Cont. movie play help function is set to On in the

Settings menu, a pop-up message will appear when you resume play a movie file.

00:04:03 / 00:07:38

1/1

Movie 01.avi

Play continuously

Resumes playing from the last viewed scene.

SUM

Playcontinuously E Pause L Jump T Tools R Return

Music

Playing Music
1. Press the ◄ or ► button to select Music, then press the
	ENTEREbutton in the Media Play menu.		Playlist	3/15
2.	Press the ◄/►/▲/▼ button to select the desired file in the file	I Love You	I Love you
	list.	Jhon	Jhon
		1st Album	Music 1
3.	Press the ENTEREbutton or (Play) button.		No Singer
		2010
			Music 2
		Pop
	−− During playing the music, you can search using the ◄ and ►	4.2MB	No Singer
			Music 3
	button.		No Singer
		01:10 / 04:02	Music 4
	−− (REW) and µ(FF) buttons do not function during play.		No Singer
			Music 5
Only displays the files with MP3 and PCM file extension. Other			No Singer
	file extensions are not displayed, even if they are saved on the	SUM	EPause L Jump T Tools	R Return
	same USB device.

If the sound is strange when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)

Photos

Viewing a Photo (or Slide Show)

1.Press the ◄ or ► button to select Photos, then press the ENTEREbutton in the Media Play menu.

2.Press the ◄/►/▲/▼ button to select the desired file in the file list.

3.Press the ENTEREbutton or (Play) button.

−− While a photo list is displayed, press the (Play) / ENTEREbutton on the remote control to start slide show.

−− All files in the file list section will be displayed in the slide show.

−− During the slide show, files are displayed in order from currently being shown.

Music files can be automatically played during the Slide Show if the Background Music is set to On.

The BGM Mode cannot be changed until the BGM has finished loading.

Normal

Image1024.jpg

1024x768

2010/2/1

3/15

SUM	EPause L Previous/Next T Tools R Return

English 27

Advanced Features04

[UC4000_19]BN68-02655H-RU.indb 27			2010-04-05 1:36:15

Advanced Features

¦¦ Playing the Multiple Files

Playing the selected video/music/photo files

1.Press the Yellow button in the file list to select the desired file.

2.Repeat the above operation to select multiple files.

NOTE

xx The cmark appears to the left of the selected files. xx To cancel a selection, press the Yellow button again.

xx To deselect all selected files, press the TOOLS button and select Deselect All.

3. Press the TOOLS button and select Play Selected Contents.

Playing the video/music/photo file group

1.While a file list is displayed, move to the any file in desired group.

2.Press the TOOLS button and select Play Current Group.

Videos		/Movie 01.avi		2 files selected			1/1 Page
		Movie 01.avi	Movie 02.avi
		Jan.10.2010				Jan.10.2010
		Movie 03.avi	Movie 04.avi
		Jan.10.2010				Jan.10.2010
		Movie 05.avi	Movie 06.avi
		Jan.10.2010				Jan.10.2010
		Movie 07.avi	Movie 08.avi
		Jan.10.2010				Jan.10.2010
		Movie 09.avi	Movie 10.avi
		Jan.10.2010				Jan.10.2010
SUM		Change Device		Select		Sorting	T Tools

¦¦ Media Play Additional Function

Sorting the file list

Press the Blue button in the file list to sort the files.

Category	Operations	Videos	Music	Photos
Basic View	It shows whole folder. You can view the photo by selecting the folder.	>	>	>
Title	It sorts and displays the file title in Symbol/Number/Alphabet/Special order.	>	>	>
Preference	It sorts and displays the file by preference. You can change the file preference in the file	>	>	>
	list section using the Green button.
Latest Date	It sorts and shows files by latest date.	>		>
Earliest Date	It sorts and shows files by earliest date.	>		>
Artist	It sorts the music file by artist in alphabetical.		>
Album	It sorts the music file by album in alphabetical order.		>
Genre	It sorts music files by the genre.		>
Mood	It sorts music files by the mood. You can change the music mood information.		>
Monthly	It sorts and shows photo files by month. It sorts only by month (from January to			>
	December) regardless of year.

28 English

[UC4000_19]BN68-02655H-RU.indb 28			2010-04-05 1:36:17

Videos/Music/Photos Play Option menu

During playing a file, press the TOOLS button.

Category	Operations	Videos	Music	Photos
Title	You can move the other file directly.	>
Repeat Mode	You can play movie and music files repeatedly.	>	>
Picture Size	You can adjust the picture size for preference.	>
Picture Setting	You can adjust the picture setting (p. 15, 16, 17).	>		>
Sound Setting	You can adjust the sound setting (p. 17, 18, 19).	>	>	>
Subtitle Setting	You can play the video file with Subtitle. This function only works if the subtitles are	>
	the same file name as the video file.
Stop Slide Show /	You can start or stop a slide show.			>
Start Slide Show
Slide Show Speed	You can select the slide show speed during the slide show.			>
Background Music	You can set and select background music when watching a slide show.			>
Zoom	You can zoom into images in full screen mode.			>
Rotate	You can rotate images in full screen mode.			>
Information	You can see detailed information about the played file.	>	>	>

Settings

Using the Setup Menu

■■ Cont. movie play help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie playback.

■■ Get the DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD registration using Media Play, the registration is completed.

For more information on DivX® VOD, visit “www.DivX.com.”

■■ Get the DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.

■■ Information: Select to view information about the connected device.

English 29

Advanced Features04

[UC4000_19]BN68-02655H-RU.indb 29			2010-04-05 1:36:18

Advanced Features

Anynet+

What is Anynet+? t

Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.

To connect to Home Theatre

Anynet+	Anynet+ Device 2	Home Theatre
Device 1

TV Rear Panel

HDMI Cable	HDMI Cable

HDMI Cable

Optical Cable

1.Connect the HDMI IN (1(DVI) or 2) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.

2.Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.

NOTE

xx Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre.

xx When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV.

xx Connect only one Home Theatre.

xx You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions. xx Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.

xx Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.

30 English

[UC4000_19]BN68-02655H-RU.indb 30			2010-04-05 1:36:19