BN68-00801F-00Eng.qxd 1/11/05 2:40 PM Page 5
Viewing the Connection Panel
Power Input |
Whenever you connect an audio or video system to your set, ensure that all elements are switched off.
English-5
BN68-00801F-00Eng.qxd 1/11/05 2:41 PM Page 56
Installing the Wall Mount Kit (LE26R51B)
This installation is to be used when attaching the wall mount to a concrete wall. When attaching to other building materials, please contact your nearest dealer.
Components (Sold separately)
M4 X L15
Wall-Bracket |
Set-Bracket |
Screw: 8EA |
M4 X L20
Wood Screw: 4EA |
Anchor: 4EA |
Installation Guide |
How to assemble the Wall Mount Bracket
1 Mark the location of hole on the wall.
Drill a hole of 35mm depth on the marked location.
Fix anchorson each hole on the wall.
Connect wall-bracketto the wall with wood screwsafter fitting anchorsinto the wall-bracket .
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
English-56
BN68-00801F-00Eng.qxd 1/11/05 2:41 PM Page 57
Installing the Wall Mount Kit (LE26R51B)
How to assemble the Wall Mount Bracket
2 Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Remove the four screws from the back of the TV.
Separate the stand from the TV.
Cover the bottom hole with a cap
Attach the set-bracket onto the rear side of the TV set and secure the screws .
3 Insert three Hangers of the set-bracketinto the grooves of the wall-bracket.
Fix set-bracketand wall-bracketwith screws.
Note: Before installing the set on the wall, connect the cables to the set first.
English-57