RISCO Group RK800Q0B2 User Manual [es, en]

è

è

Model: RK800Q0B2

QUAD 15m/50ft

PD6662, EN50131-1,

EN50131-2-2 Grade 2, Class II

www.riscogroup.com

www.riscogroup.co.uk

www.riscogroup.fr
www.riscogroup.it

www.riscogroup.es

www.riscogroup.com/por

9 -16VDC

15mA at 12VDC (typical)
26mA at 12VDC (max.)

mA

64.2mm
(2.5")

120 gr. (4.2 oz.)

The iWISE RK800Q0B2 detector is a motion detector designed for installation

as a addressable detector on the ProSYS Bus and includes an extra relay zone

LED Display

input

Main Features

• Two dual-element PIR sensors

• Coverage 15m (50')

• Two independent digital signal

• Cover tamper

• Remote Control & Diagnostics

processing channels

Il rivelatore iWISE RK800Q0B2 è un rivelatore di movimento progettato per
essere installato come un rivelatore indirizzato sul BUS della centrale ProSYS ed
include un ingresso di zona aggiuntivo

Caratteristiche Principali

• Due sensori PIR a doppio elemento

• Copertura da 15m

• Due canali indipendenti di elaborazione

• Tamper Antiapertura

• Diagnostica e Controllo Remoto

digitale del segnale

El detector iWISE RK800Q0B2 es un detector de movimiento diseñado para
instalarse como un detector direccionable en el BUS de la ProSYS, e incluye una
entrada adicional de zona (permite conectar al BUS otro dispositivo estándar
cableado con salida de relé).

Características Principales

• Dos sensores PIR de doble elemento

• Alcance 15m (50’)

• Tamper de tapa

• Control y Diagnósticos Remotos

• Dos canales independientes de

procesamiento digital de la señal

Le détecteur iWISE RK800Q0B2 est un détecteur de mouvement conçu pour
être installé comme détecteur adressable sur le Bus de la ProSYS et qui inclut une
entrée zone supplémentaire.

Fonctionnalités Principales

• Deux capteurs IRP à double éléments

• Couverture de 15m

• Deux canaux avec traitements du signal

• Autoprotection à l’ouverture

• Contrôle et diagnostiques à distance

ID 1 2 3 4 5

01 OFF OFF OFF OFF OFF

02 ON OFF OFF OFF OFF

03 OFF ON OFF OFF OFF

04 ON ON OFF OFF OFF

05 OFF OFF ON OFF OFF

06 ON OFF ON OFF OFF

07 OFF ON ON OFF OFF

08 ON ON ON OFF OFF

09 OFF OFF OFF ON OFF

10 ON OFF OFF ON OFF

11 OFF ON OFF ON OFF

12 ON ON OFF ON OFF

13 OFF OFF ON ON OFF

14 ON OFF ON ON OFF

15 OFF ON ON ON OFF

16 ON ON ON ON OFF

17 OFF OFF OFF OFF ON

18 ON OFF OFF OFF ON

19 OFF ON OFF OFF ON

20 ON ON OFF OFF ON

21 OFF OFF ON OFF ON

22 ON OFF ON OFF ON

23 OFF ON ON OFF ON

24 ON ON ON OFF ON

25 OFF OFF OFF ON ON

26 ON OFF OFF ON ON

27 OFF ON OFF ON ON

28 ON ON OFF ON ON

29 OFF OFF ON ON ON

30 ON OFF ON ON ON

31 OFF ON ON ON ON

32 ON ON ON ON ON

numérique indépendants

O detector iWISE RK800Q0B2 é um detector desenvolvido para instalações
como um detector endereçável no BUS da ProSYS, e inclui uma entrada extra de
zona relé (Similar a um expansor)

Principais Características

• Dois elementos de Infravermelhos
Passivos duplos

• Tamper da Tampa

• Controle & diagnóstico Remoto

• Modelo de 15m (50')

• Dois canais com processamento

independente digital do sinal

LED State Description
Yellow

On PIR channel 1 detection
Flashing Trouble in PIR channel 1

Green

On PIR channel 2 detection
Flashing Trouble in PIR channel 2

Red

On ALARM
Flashing Communication trouble

All LEDs

Flashing
(consecutively)

At power-up, the LEDs will flash
consecutively until the end of the warm­up period (2-3 minutes).

Indicatori LED

LED Stato Descrizione
Giallo

Illuminato Rilevazione del 1° canale all’infrarosso

passivo (PIR)

Lampeggiante Anomalia del 1° canale PIR

Verde

Illuminato Rilevazione del 2° canale PIR
Lampeggiante Anomalia del 2° canale PIR

Rosso

Illuminato ALLARME
Lampeggiante Problema di comunicazione

Tutti i
LED

Lampeggiante

(consecutivamente)

All’alimentazione tutti i LED lampeggiano
in sequenza fino alla fine del periodo di
preriscaldamento (2-3 minuti).

Indicación de los LEDs

LED Estado Descripción

Amarillo

Verde

Rojo

Todos
los
LEDs

Encendido Detección canal PIR 1
Parpadeando Problema en el canal PIR 1
Encendido Detección canal PIR 2
Parpadeando Problema en el canal PIR 2
Encendido Indicación de ALARMA
Parpadeando Problema de comunicación
Parpadeando

(consecutivamente)

Al dar alimentación, los LEDs
parpadearán consecutivamente hasta
que finalice el periodo de calentamiento
(2-3 minutos).

Affichage à diodes LED

LED Position Signification

Jaune

Verte

Rouge

Toutes
diodes
LED

Allumée (ON) Détection du 1
Clignotante Panne du 1er canal IRP
Allumée (ON) Détection du 2
Clignotante Panne du 2
Allumée (ON) Indique une ALARME
Clignotante Problème de communication
Clignotante
(l'une après
l'autre)

Lors de la mise sous tension, les
diodes LED clignotent de manière
ininterrompue, l'une après l'autre,
jusqu'à la fin de la séquence

er

canal IRP

me

canal IRP

me

canal IRP

d'initialisation (2 à 3 minutes).

Visualizacão dos LEDs

LED Position Signification

Aceso Detecção de Infravelmenho Passivo 1

Amarelo

6.8K

6.8K

4.7K

Verde

Piscado Problema no canal Infravelmenho

Passivo 1
Aceso Detecção de Infravelmenho Passivo 2
Piscado Problema no canal Infravelmenho

Passivo 2

Rojo

Todos
los
LEDs

Aceso ALARME
Piscado Problema de comunicação
Piscado
(sucessivamante)

Ao conectar, os LEDs piscarão

consecutivamente até o final do

período de aquecimento (2-3minutos).

-20°C to 60°C (-4°F to 132°F)

1

ProSYS Programming (Ver 7.xx and above):

1. Add/delete an iWISE BUS detector

 Installer menu [7] Accessories / Install > [1] Add Delete Module > [9] More.. >

[5] BUS Zone

 Select ID (as defined by the Dip switches) and define type as iQDG2

2. Assign the iWISE BUS detector to a Zone

 Installer menu [2] Zones > [1] One by One > Select Zone
 Under Termination select > [5] BUS Zone
 Select the BUS zone number to assign to the programmed zone

3. Program the zone input on the IWISE BUS

 Installer menu [2] Zones > [1] One by One > Select Zone
 Under Termination select from options [07] to [11]
 Press [#]. Select the BUS zone that the input zone belongs to.

4. Configure the iWISE BUS detector parameters (see table below)

 Installer menu select [2] Zones > [0] Miscellaneous > [3] BUS Zone Parameters

Parameter Description
LEDs Determines the operation of the detector’s LEDs.
Sensitivity Defines the sensitivity of the detector (PIR)
Self Test Used to test the detection technologies. In the event of a

failed test, a Self Test Trouble is created.

Programmazione ProSYS (Versione 7.xx e successive):

1. Aggiungi/cancella un rivelatore BUS iWISE

 Menù Tecnico [7] Accessori > [1] Agg./Canc.Modulo > [9] Continua.. > [5] Zone

BUS

 Selezionare il numero ID (come impostato dai microinterrutori) e definire il tipo

come iQDG2

2. Assegnazione del rivelatore BUS iWISE ad una Zona

 Menù Tecnico [2] Zone > [1] Una per Una > Selezionare il numero di zona
 Raggiunta l’opzione Terminazione selezionare > [6] Zona BUS
 Selezionare il numero ID della zona BUS da assegnare alla zona che si sta

programmando

3. Programmazione dell’ingresso di zona aggiuntivo sul rivelatore BUS

iWISE

 Menù Tecnico [2] Zone > [1] Una per Una > Selezionare il numero di zona
 Raggiunta l’opzione Terminazione selezionare una delle opzioni da [07] a [11]
 Premere [#]. Selezionare il numero ID della zona BUS che fa riferimento

all’ingresso di zona che si sta programmando.

4. Configurazione dei parametri del rivelatore BUS iWISE (vedi tabella)

 Menù Tecnico selezionare [2] Zone > [0] Varie > [3] Parametri Zone BUS

Parametro Descrizione
LED Determina il modo di funzionamento dei LED
Sensibilità Determina la sensibilità dei sensori PIR
Auto-Test

Utilizzata per testare le tecnologie di rilevazione. Nel
caso il test non vada a buon fine, verrà registrato in
centrale un evento di Auto test fallito.

1. Añadir/Borrar un detector iWISE BUS

 Menú Instalador > [7] Accesorios > [1] Agregar/Borrar Módulo > [9] Más... > [5]

Zonas BUS

 Seleccione el ID (según se haya definido con los microinterruptores DIP) y

defina el tipo como iQDG2

2. Asignar el detector iWISE BUS a una Zona

 Menú Instalador > [2] Zonas > [1] Una a Una > Seleccione la Zona
 En el apartado Terminación, seleccione la opción [05] Zona BUS
 Seleccione el ID del detector BUS que se va a asignar a la zona programada

3. Programar la entrada de zona adicional del IWISE BUS

 Menú Instalador > [2] Zonas > [1] Una a Una > Seleccione la Zona
 En el apartado Terminación, seleccione una de las opciones de la [07] a la [11]
 Presione [#]. Seleccione el ID del detector BUS al que pertenece la entrada de

zona.

4. Configuración de los parámetros del detector iWISE BUS (ver tabla)

 Menú Instalador > [2] Zonas > [0] Varios > [3] Parámetros Zona BUS

Parámetro Descripción
LEDs

Define el modo de funcionamiento de los LEDs

Sensibilidad Define la sensibilidad de los sensores PIR
Auto-Test Utilizado para probar las tecnologías de detección.

Cuando un test falle, se generará un Problema de Fallo
de Auto Test.

Programmation ProSYS (Ver 7.xx et supérieure) :

1. Ajouter/Supprimer un détecteur iWISE BUS

 Menu Installateur > [7] Accessoires > [1] Ajout/Suppression Module > [9] Plus...

> [5] BUS Zones

 Sélectionner l’ID (comme défini par les Dip switches) et définir le type sur

iQDG2

2. Assigner le détecteur iWISE BUS à une zone

 Menu Installateur > [2] Programmation Zones > [1] Une par Une > Sélectionner

la zone

 Dans la section Nature, sélectionner > [5] Zone-BUS
 Sélectionner le numéro ID de zone BUS à assigner à la zone programmée

3. Programmer l’entrée zone supplémentaire de l’iWISE BUS

 Menu Installateur > [2] Programmation Zones > [1] Une par Une > Sélectionner

la zone

 Dans la section Nature, sélectionner de l’option [07] à l’option [11]
 Valider par [#]. Sélectionner la zone BUS pour laquelle l’entrée zone

supplémentaire est paramétrée.

4. Configurer les paramètres du détecteur iWISE BUS (voir tableau)

 Menu Installateur > [2] Programmation Zones > [0] Divers > [3] BUS-Zone

Paramètres

Paramètres Description
LED
Sensibilité
Self Test
(Auto Test)

Définit le mode de fonctionnement des LEDs.
Définit la sensibilité du détecteur (canaux IRP)
Utilisé pour tester les technologies de détection. Si le test
échoue, un Défaut Auto-test est créé.

Programação da ProSYS (Ver 7.xx ou posterior):

1. Adicionar/Apagar um detector iWISE BUS

 Menu do instalador [7] Acessórios > [1] Adicionar / Apagar módulo > [9] Mais..

> [5] Zonas de BUS

 Selecionar ID (como definido nos Dipswitches) e definir como o tipo iQDG2

2. B: Alocar o iWISE BUS à uma zona

 Menu do Instalador [2] Zonas > [1] Uma a Uma > Selecionar Zona
 No menu de Terminação selecione > [5] Zona de BUS
 Selecione o número da zona de BUS para alocar a zona programada

3. Programação da entrada de zona do IWISE BUS

 Menu do instalador [2] Zonas > [1] Uma a uma > Selecionar Zona
 No menu de terminação escolha uma das opções de [07] até [11]
 Apertar [#]. Escolher a zona de BUS que a entrada de zona pertence.

4. Configurar os parâmetros do detector iWISE BUS (Veja tabela)

 Selecionar o menu do instalador [2] Zonas > [0] Diversos > [3] Parâmetros de

Zonas de BUS

Parâmetro Descrição
LEDs Define o modo de operação dos LED´s
Sensibilidade Define qual é o nível de sensibilidade do canal de

Infravermelho Passivo

Auto - Teste Usado para testar as tecnologias de detecção.

Walk Test
Test Sensore

Prueba de detección
Test de marche

Prova de Moviento

RISCO Group and its subsidiaries and affiliates ("Seller") warrants its
products to be free from defects in materials and workmanship under
normal use for 24 months from the date of production. Because
Seller does not install or connect the product and because the
product may be used in conjunction with products not manufactured
by the Seller, Seller cannot guarantee the performance of the
security system which uses this product. Seller's obligation and
liability under this warranty is expressly limited to repairing and
replacing, at Seller's option, within a reasonable time after the date of
delivery, any product not meeting the specifications. Seller makes no
other warranty, expressed or implied, and makes no warranty of
merchantability or of fitness for any particular purpose.
In no case shall seller be liable for any consequential or incidental
damages for breach of this or any other warranty, expressed or
implied, or upon any other basis of liability whatsoever.
Seller's obligation under this warranty shall not include any
transportation charges or costs of installation or any liability for direct,
indirect, or consequential damages or delay.
Seller does not represent that its product may not be compromised or
circumvented; that the product will prevent any personal injury or
property loss by burglary, robbery, fire or otherwise; or that the
product will in all cases provide adequate warning or protection.
Buyer understands that a properly installed and maintained alarm
may only reduce the risk of burglary, robbery or fire without warning,
but is not insurance or a guaranty that such event will not occur or
that there will be no personal injury or property loss as a result
thereof.
Consequently seller shall have no liability for any personal injury,
property damage or loss based on a claim that the product fails to
give warning. However, if seller is held liable, whether directly or
indirectly, for any loss or damage arising under this limited warranty
or otherwise, regardless of cause or origin, seller's maximum liability
shall not exceed the purchase price of the product, which shall be
complete and exclusive remedy against seller.
No employee or representative of Seller is authorized to change this
warranty in any way or grant any other warranty.

WARNING: This product should be tested at least once a week.

Contacting RISCO Group

RISCO Group is committed to customer service and product support.
You can contact us through our website www.riscogroup.com or as
follows:

United Kingdom

Tel:[phone]
[e-mail]

Italy
Tel: [phone]

[e-mail]

Spain

Tel:[phone]
[e-mail]

France

Tel: [phone]
[e-mail]

Belgium

Tel: [phone]
[e-mail]

USA

Tel:[phone]
[e-mail]

Brazil

Tel:[phone]
[e-mail]

China

Tel: [phone]
[e-mail]

Poland

Tel: [phone]
[e-mail]

Israel

Tel: [phone]
[e-mail]

All rights reserved. No part of this document may be reproduced in
any form without prior written permission from the publisher

RISCO Group 01/2013 5IN1242 B

2