PRODUCT SPECIFICATION |
camera solutions |
|
|
Spectra® V Series Dome Systems
PREMIER INTEGRATED DOME SYSTEM
Product Features
•30x Zoom Autofocus, Integrated Camera/Optics Packages
•Multiple models: Indoor In-Ceiling, Standard and Environmental Pendant, Pressurized and Stainless Steel Environmental Pendant
•Day/Night, 740 TVL, Wide Dynamic Range (WDR)
•Low Lux Noise Reduction
•Motion Detection
•Window Blanking, Horizontal and Zone Blanking
•Camera Title Overlay, 20 User-Definable Characters
•On-Screen Compass and Tilt Display
•Password Protection
•Built-in Surge and Limited Lightening Protection
•Integrated Passive Unshielded Twisted Pair (UTP) Circuit
•Internal Scheduling Clock
IN-CEILING MODEL |
PENDANT MODEL |
SD530-FO |
SD530-PG-0 |
Modularity
Spectra® V was designed with ease of installation and ease of maintenance in mind. Each dome system consists of three components: a back box, a dome drive, and a lower dome. These three system components are interchangeable with other Spectra V dome systems, making retrofitting and application adjustments simple. Also, dome drives and lower domes can be removed and replaced reducing maintenance time.
Back Box
Spectra V back box options include the following models: environmental pendant. The Spectra V Series can also be ordered with heavy-duty, pressurized, and stainless steel back box options (refer to the appropriate product specification sheets for more information). Each back box model features built-in back box memory to store camera and location-specific dome settings, including labels, presets, patterns, and zones. A passive UTP circuit is located on the door assembly for convenient video transmission through twisted pair wire.
Dome Drive
The Spectra V dome drive’s unique integrated optics package incorporates many advanced features that allow the system to produce high quality video in the most difficult environments. All cameras in Spectra V dome drives feature LowLight™ technology allowing the cameras to compensate for scenes where minimal light is present. The cameras feature built-in motion detection and advanced WDR that enables the system to compensate for scenes where dramatic contrasts in lighting are present.
Lower Dome
Special consideration was taken when designing the Spectra V lower dome bubble to ensure that an optimal optical relationship between the lens and bubble was achieved, providing crystal clear video at long focal lengths.
Dome Systems
Spectra V dome systems feature many software enhancements that increase performance and make configuration and operation easy. An internal scheduling clock allows for the scheduling of presets and patterns. Window blanking enables a user to configure up to eight, four-sided, user-defined privacy areas. Password protection prevents unauthorized users from changing the system settings. Configurable on-screen compass and tilt display provides positioning information when needed. Intuitive multilingual on-screen menus can be displayed in English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech.
Spectra V’s variable speed capabilities range from a smooth, fast pan motion of 400 degrees per second to a smooth “creep” speed of 0.1 degree per second. The system is capable of continuous 360 degrees rotation and has an “auto flip” feature that allows the dome to rotate 180 degrees and reposition itself for uninterrupted viewing of any subject that passes directly beneath the dome.
Durability
Pelco’s Pressurized and Stainless Steel options are designed for harsh environmental installations. The Stainless Steel option meets NEMA Type 4X and IP66 standards. The components (back box and lower dome) provide added protection against corrosive conditions. The IDM4012SS mount is designed specifically for the Stainless Steel Spectra V and features an all stainless steel construction and conduit access in the bottom and back of the mount.
Pelco’s Pressurized Spectra V option provides ultimate protection of the camera optics and electronics from moisture, corrosive gases, and airborne contaminants, meeting NEMA Type 6P and IP67 standards when installed properly. Domes are pressurized with dry nitrogen before or after installation to stabilize the internal environment. Temperature, pressure, and dew point sensors are placed inside the system to send “Alert” messages when conditions are beyond factory-set limits and allow for real time on-screen monitoring. The lower dome features an innovative single captivated fastener, O-ring seal, and a stainless steel V-band to create an easy and reliable pressure seal. Accessible on the lower dome trim ring is a Schrader valve for system purging and a pressure relief valve. The Pressurized Spectra V SE Series is supplied with a pre-wired cable with mating connector. The cable includes all wires for system functionality, including power, alarms, auxiliaries, coaxial video, UTP video, and serial control.
C5007S / New 11-06-19
TECHNICAL SPECIFICATIONS
CAMERA/OPTICS
|
Day/Night (30X) |
|
|
Signal Format |
NTSC / PAL |
|
|
Scanning System |
2:1 Interlace |
Image Sensor |
1/3-inch |
Effective Pixels |
1,296 (H) x 1,041 (V) |
|
|
Horizontal Resolution |
|
NTSC |
>740 TV Lines |
PAL |
>740 TV Lines |
Lens |
f/1.4 (focal length, 4.3 ~ 129 mm) |
Zoom |
30X optical, 12X digital |
|
|
Zoom Speed (optical range) |
5.5/7.4/10.3 seconds |
|
|
Horizontal |
58.3° at 4.3 mm wide zoom; |
Angle of view |
2.1° at 129 mm telephoto zoom |
Focus |
Automatic with manual override |
Maximum Sensitivity at 35 IRE |
0.55 lux at 1/60 sec (color) |
NTSC/EIA |
0.018 lux at 1/2 sec (color) |
|
0.0048 lux at 1/2 sec (B-W) |
PAL/CCIR |
0.45 lux at 1/50 sec (color) |
|
0.015 lux at 1/1.5 sec (color) |
|
0.004 lux at 1/1.5 sec (B-W) |
White Balance |
Automatic with manual override |
Shutter Speed |
Automatic (electronic iris)/Manual |
NTSC |
1/15 ~ 1/30,000 |
PAL |
1/13 ~ 1/30,000 |
Iris Control |
Automatic iris control with manual override |
|
|
Gain Control |
Automatic/OFF |
|
|
Video Output |
1 Vp-p, 75 ohms |
|
|
Video Signal-to-Noise |
>50 dB |
Wide Dynamic Range |
128 db |
|
|
DOME DRIVE FEATURES
•256 Presets
•±0.1° Preset Accuracy
•Multilingual Menus (English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech)
•RJ-45 Data Port for Software Update and Setup
•On-Screen Compass, Tilt, and Zoom Display
•400°/sec Pan Preset Speed and 200°/sec Tilt Preset Speed
•Rotating Discreet Liner with Sealed Fixed Bubble
•Window Blanking: Up to 8, Four-Sided, User-Defined Shapes
•8 Zones (configurable in size) Can Be Labeled with up to 20 Characters Each or Set to Output Blank Video
•7 Alarm Inputs
•1 Auxiliary (Form C) Relay Output and 1 Open Collector Auxiliary Output (can be alternately configured to operate upon alarm)
•Configurable Locations of Labels and On-Screen Displays
•Action on Alarm: Alarms Can Be Individually Configured for 3 Priority Levels, to Initiate a Stored Pattern, or to Go to an Associated Preset When Received
•Resume After Alarm: Allows the Dome to Return to a Previously Configured State After Alarm Acknowledgment or to its Previous Position Before Alarm
•Multiple Park and Power-Up Action
•Patterns: Up to 8, On-Screen, User-Defined Configurable Patterns; Includes Pan, Tilt, Zoom, and Preset Functions
•Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion to Depth of Zoom
•Variable Scan Speed: Scan Speed Can Be Configurable Between 1 to 40°/sec
•Pan Motion Allows 0.1 to 150°/sec Pan Speed
•Configurable Limit Stops for Auto/Random/Frame Scan Modes
•Autosensing Protocol (Coaxitron®, RS-422 Pelco P and Pelco D, Sensormatic®, Vicon®); Accepts Other Control Protocols with Optional Translator Card
•Digital Position and Zoom Control and Feedback through Pelco D Protocol
•Built-in Menu System for Setup of Configurable Functions
•“Auto Flip” Rotates Dome 180° at Bottom of Tilt Travel
•Configurable Zoom Speeds
•Low Lux Noise Reduction (reduces noise in low light)
TECHNICAL SPECIFICATIONS
WINDOW BLANKING |
WIDE DYNAMIC RANGE |
Window blanking allows a |
The WDR setting balances the |
user to configure up to |
brightest and darkest sections |
eight, four-sided, user-defined |
of a scene to produce a picture |
areas that cannot be viewed |
that provides more detail. |
by the operator of the dome |
|
system. A blanked area will |
|
move with pan and tilt |
|
functions and automatically |
|
adjust in size as the lens |
|
zooms telephoto and wide. |
|
BEFORE BEFORE
AFTER |
AFTER |