Pelco ES3012-2PJZ30PW, ES3012-2PJZ30PN, ES3012-2PJZ30P, ES3012-2PJZ30N, ES3012-2PJZ30 Specsheet

PRODUCT SPECIFICATION	camera solutions

ES3012 Series Integrated Positioning System

ESPRIT® PREMIUM PERFORMANCE P/ T, COAXITRON® COMPATIBLE

Product Features

•Integrated Receiver, Pan/ Tilt, and Housing with No Exposed Cabling

•Optional ImagePak® Integrated Optics Package

•Quick and Simple Electrical Connections

•Variable Speed Advanced Motor Control Technology

•360° Continuous Pan Rotation

•Zone Blanking Allows up to 8 Zones (Configurable in Size) to Be Set to Output Blank Video

•Operational in 145 kph (90 mph) Wind Conditions; Can Withstand Wind Velocity Up to 209 kph (130 mph)

•Pan Preset Speed of 100° Per Second in 80 kph (50 mph) Winds and 50° Per Second in 145 kph (90 mph) Winds

•Tilt Range of +33° to –83° from Horizontal

•Preset Positioning

•Designed for Minimal Maintenance, No Gears to Adjust

•Lightweight Aluminum Construction

•Meets NEMA Type 4X and IP66 Standards

Pelco’s Esprit® ES3012 Series integrated positioning system ingeniously integrates a pan/tilt, enclosure, and receiver into one compact system that is easy to install. On-screen, user-friendly menus also make the system easy to configure and operate.

The ES3012 Series is available as a standard or ImagePak® system. The Esprit ImagePak system combines the innovative design of the standard system with a factory-installed camera and lens package of your choice. Choose from a variety of high resolution, day/night and color cameras. The standard system does not include the camera and lens components. It is designed to accept any 24 VAC camera and lens combination up to 30.73 x 8.76 x 8.05 cm (12.10" L x 3.45" W x 3.17" H).

Every ES3012 system (standard or ImagePak) has a built-in heater, window defroster/defogger, sun shroud, and insulation blanket. The system is available with an input voltage of 24 VAC or with a selectable power source of 120/230 VAC.

ES3012-2W SYSTEM

WITH WALL MOUNT

A powder-coated, aluminum construction makes the ES3012 Series ideal for either indoor or outdoor applications. The system has an absolute operating temperature range of –40° to 60°C (–40° to 140°F). Within two hours after power-up, the entire unit can de-ice and be operational from a temperature of –25°C (–13°F).

The Esprit ES3012 Series variable pan and tilt speeds range from 0.5 degrees to 40 degrees per second in manual pan mode and 0.5 degrees to 20 degrees per second in manual tilt. Pan preset and turbo speeds are 100 degrees per second in wind speeds of 80 kph (50 mph) and 50 degrees per second in the 145 kph (90 mph) wind-speed profile. Tilt preset speed is 30 degrees per second. The ES3012 Series is capable of 360 degrees of continuous pan rotation. The tilt range allows for horizontal viewing of +33 to –83 degrees. There are 64 configurable preset positions with a preset accuracy of one-quarter degree.

The ES3012 Series features on-screen configuration menus for pan and scan speed, limit stops, zone blanking, and patterns. The unit also has a power-up recovery mode that allows the user to specify what condition the system will resume whenever the power is cycled.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C306 / REVISED 8-27-12

TECHNICAL SPECIFICATIONS

ELECTRICAL

Input Voltage	24, 120, or 230 VAC, 50/60 Hz; switch
	selectable for 120/230 VAC inputs
Input Voltage Range	±10%
Power Consumption	Maximum 70 VA per system
Camera and Lens Voltage	24 VAC
Heater and Defroster	Thermostatically controlled
Electrical Connections	Two power source connections made at
	mount location with wire nut splices and one
	ground terminal; one BNC receptacle and four
	terminals on interconnect PCB at mount
	location
Video Coaxial Cable
Max. Wiring Distances	Cable Type*	Maximum Distance
	RG59/U	229 m (750 ft)
	RG6/U	305 m (1,000 ft)
	RG11/U	457 m (1,500 ft)

*Minimum cable requirements:

75-ohms impedance; all-copper center conductor; all copper braided shield with 95% braid coverage

GENERAL

Construction	Die-cast, extruded and sheet aluminum;
	stainless steel hardware
Finish	Gray polyester powder coat
Viewing Window	4.76 mm (0.18-inch) thick, optically clear,
	impact-resistant MR5 coated Lexan®
	(UL 94 HB rated)
Window Viewing Area	5.71 cm (2.25-inch) diameter
Operating Temperature	–40° to 50°C (–40° to 122°F) for sustained
	system operation or 60°C (140°F) absolute
	maximum. Within two hours after power-up,
	the entire unit can de-ice and be operational
	from a temperature of –25°C (–13°F).
Operating Environment	Will remain operational in 145 kph (90 mph)
	wind conditions;
	withstands 209 kph (130 mph)
Weight	Unit	Shipping
ES3012-2, ES3012-5	9.1 kg (20.0 lb)	12.3 kg (27.0 lb)
ES3012-2 or ES3012-5
with ImagePak option	11.7 kg (25.7 lb)	14.8 kg (33.0 lb)

MECHANICAL

Pan Movement	360° Continuous pan rotation
Vertical Tilt	Unobstructed +33° to –83°
Variable Pan/Tilt Speed
Pan	0.5° to 40°/sec variable-speed operation,
	100°/sec Turbo
Tilt	0.5° to 20°/sec variable-speed operation
Preset Speeds
Pan	100°/sec
Tilt	30°/sec
Camera Mounting	Elongated holes on removable camera mount;
	supplied with an adapter bracket to
	accommodate various heights of cameras

Maximum Camera and

Lens Size Accepts camera and lens combinations (including BNC connector) up to:

30.73 x 8.76 x 8.05 cm (12.10" L x 3.45" W x 3.17" H)

Latches	One link-lock, No. 3 stainless-steel latch;
	can be secured with padlock (not supplied)

VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

43.9
(17.3)	35.5	13.3
		(5.2)
	(14.0)
		10.5
		(4.1)

		35.1		12.3
		(13.8)
				(4.8)
	23.2		41.7
	(9.1)		(16.4)
17.5	20.2			19.7
(6.9)	(7.9)			(7.7)

CERTIFICATIONS/RATINGS/PATENTS

•CE, Class B

•FCC, Class B

•UL/cUL Listed

•C-Tick

•Meets NEMA Type 4X and IP66 standards

•U.S. Patents 340,940 and 5,224,675

LENS SPECIFICATIONS

(IMAGEPAK ESPRIT SYSTEMS ONLY)

		Z10/Z10P	Z20/Z20P	Z30/Z30P
	Type	Motorized zoom	Motorized zoom	Motorized zoom
	Format Size	1/3-inch	1/3-inch	1/3-inch
	Focal Length	6 to 60 mm	5.6 to 112 mm	5.5 to 165 mm
	Zoom Ratio	10X	20X	30X
	Relative Aperture (F)	1.6 ~ 360	1.6 ~ 360	1.8 ~ 360
	Operation
	Iris	Auto iris	Auto iris	Auto iris
		(direct drive)	(direct drive)	(direct drive)
	Focus and Zoom	Motorized†	Motorized†	Motorized†
	Angle of View
	Diagonal	9.7°~ 53.7°	3.2°~ 59.4°	2.1°~ 58.7°
	Horizontal	7.8°~ 43.7°	2.6°~ 47.6°	1.7°~ 47.6°
	Vertical	5.9°~ 33.0°	1.9°~ 35.7°	1.3°~ 33.9°
	Min. Object	1.0 m	1.5 m	1.8 m
	Distance

†Model numbers with “P” suffix are motorized with preset capability.