Pelco DSSRV2-005-D, DSSRV2-005DV-US, DSSRV2-040-D, DSSRV2-040, DSSRV2-040DV-D Specsheet

PRODUCT SPECIFICATION	video management solutions

Digital Sentry® DSSRV2 Network Video Recorder

H.264 CAPABILITY, FULLY SCALABLE HARDWARE/SOFTWARE SOLUTION

Product Features

•Increased data rate of up to 350 Mbps (RAID) or 300 Mbps (JBOD) total throughput, allowing the server to support more users and play back more cameras simultaneously than previous DSSRV models

•4TB storage drives provide 33% more storage over DSSRV 3TB models at no additional cost; systems previously utilizing two or more servers can now be built on a single server

•SSD system drive, with increased read-write speeds and no moving parts, increases overall system responsiveness and reliability

•Supports up to 128 IP Camera Streams; up to 64 Analog Cameras*

•Records H.264, MJPEG, and MPEG-4 IP Streams

•Supports Pelco and Third-Party IP Cameras and Network Encoders

•Compatible with DS ControlPoint for Simultaneous Monitoring of All DS Series and DX Series Products in a Single Client Interface

•Network Health and Event Monitoring Support Through SNMP and New Digital Sentry® System Information (DSSI) Utility

Optimized For Video Surveillance

The Digital Sentry® Network Video Recorder (DSSRV2 NVR) is optimized by Pelco to deliver the essential hardware support for the DS NVs video management software (VMS) without the extra cost or risk of integrating hardware and software.

Boosted by the 4th Generation Intel® Xeon™ processor and 8 GB of RAM, DSSRV2 NVR provides an optimal combination of processing power and reliability to meet the demands of HD video recording and playback operations. The system is powered to support up to 128 combined IP and analog video streams, with up to 64 analog cameras supported via the optional ENC5516 direct-attached encoder. Analog streams are also supported using Pelco and third-party encoders.

The DSSRV2 NVR boasts total throughput of up to 350 Mbps (300 Mbps for JBOD models) for recording analog and IP video streams as well as playback and export through the DS ControlPoint client. The increased data rate over original DSSRV models allows more users to play back video from the server simultaneously. When determining the maximum number of cameras and the desired frame rate to host on each system, the number of concurrent client connections, the number of streams played back per client, and the bandwidth required for client connections must be considered.

The DSSRV2 NVR functions as a stand-alone system or as part of a network of servers, monitored from the DS ControlPoint user interface. The system can be deployed solely as a network video recorder, as a digital video recorder (DVR), or as a hybrid NVR.

•Compatible with the DS Archive Utility

•Recording Rate Configurable per Individual Camera

•VideoXpert Ready. Migrate to VideoXpert, bringing your products forward into a next generation VMS

Two gigabit network ports provide for convenient network architecture planning by allowing one port to be dedicated to IP cameras, while the second network port is used for client connections. Two DisplayPorts ports provide a convenient connection for high resolution digital monitors for use with HD cameras.

DSSRV2 models are available with DIACAP/DIARMF-ready software, for use in secured environments implementing information assurance security standards.

Reliability

DSSRV2 models incorporate an SSD system drive. With increased read-write speeds and no moving parts, the SSD system drive increases the reliability, uptime, and responsiveness of the system. DSSRV2 systems now support 4TB drives, increasing capacity by 33% over original DSSRV models without increasing cost. With frontavailable storage drives for easy servicing and upgrades, the DSSRV2 NVR is available with up to 20 TB storage for models without the optional optical disk drive (ODD), or up to 16 TB for ODD models. The drives are hot-swappable when configured for internal RAID 5 storage.

External storage is supported through USB attached storage or by using the optional DSSRV-SCSI interface card to connect to external SCSI storage targets such as the DX8100HDDI, providing additional storage of up to 24 TB. The external storage can be configured for either JBOD storage or for software controlled RAID 5 storage.

*The DS NVs database is limited to 128 cameras. The actual number of cameras the server supports depends on camera settings, client activity, network bandwidth, and the available throughput of the DSSRV2.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C4014 / REVISED 2-25-16

TECHNICAL SPECIFICATIONS

Open Architecture

The cornerstone of Digital Sentry design, a fully Open Architecture, is provided through ONVIF compliance and support for a large number of IP-specific drivers. Users can choose specific IP cameras or encoders to fit their application.

In addition, the Digital Sentry platform supports the Pelco API and a full suite of integration tools, allowing Digital Sentry to be integrated into access control or physical security information management (PSIM) systems.

Eliminate the risk of deferred support that comes with VMS software from one vendor and a general purpose hardware platform from another. Replace it with the assurance of an integrated platform built specifically for the rigors of IP video recording. Make the performance, reliability, and Open Architecture of DS NVs running on DSSRV2 NVR the core foundation of your video management solution.

				ANALOG CAMERAS
	DSSRV2
				VIDEO ENCODER
			TCP/IP
	DX4700/DX4800
	IP CAMERAS			IP CAMERAS
	DX8100			ANALOG CAMERAS
			ENC5516
	IP CAMERAS
			DSSRV2
	GUARD	GUARD	SUPERVISOR	SYSTEM
				ADMINISTRATOR

DS CONTROLPOINT CLIENTS

IMPORTANT NOTE. PLEASE READ. The network implementation is shown as a general representation only and is not intended to show a detailed network topology. Your actual network will differ, requiring changes or perhaps additional network equipment to accommodate the system as illustrated. Please contact your local Pelco representative to discuss your specific requirements.