Panasonic ER-VAJT-64 User Manual
ER-VAJT-64
CONDUCTIVE TUBE JOINT NOZZLE FOR ER-V
Can be cut anywhere at will for universal installation
Pinpoint charge removal and dust removal made possible near the object.
SPECIFICATIONS
The ER-AT50 conductive tube, which can be cut as desired and has a
bending radius of 15 mm 0.591 in, can be attached to the ER-VAJT-64 joint
nozzle so that the tube tip can be positioned close to the objects for pinpoint
charge and dust removal.
• Conductive tube joint nozzle for ER-V • Conductive tube joint nozzle for ER-V
• Conductive tube holder
•
Correlation between tube length and maximum applied pressure
• Conductive tube
Conductive tube joint nozzle for ER-V
ER-VAJT-64
Conductive tube holder
ER-ATH
Conductive tube ER-AT50
Length 500 mm 19.685 in
Minimum bending radius
R15 mm 0.591 in
Free-cut
Ultra-compact ionizer ER-VS01
Stainless steel
0.02 to 0.7 MPa (Maximum applied pressure
depends on the tube length. Refer to the following
ER-VAJT-64
Conductive tube joint nozzle for ER-V
20 to 160 ?/min. (ANR) (at applied pressure of 0.02 to 0.7 MPa)
Material
Air pressure range
Consumption air flow
Item
Model No.
Designation
0.7
0.6
0.5
100 3.937 300 11.811 500 19.685
0
Tube length (mm in)
5 0.197
(17 0.669)
Refer to the ER-V series catalog for details about
the ionizer main unit.
DIMENSIONS (Unit: mm in)
One-touch joint
One-touch tube
replacement
possible
Max. applied
pressure (MPa)
No. PCE-ERVAJK September, 2003
18
0.709
"6
"0.236
9 0.354
16.5
0.650
( )
30.5
1.201
( )
"15
"0.591
"22
"0.866
2-"3.3 "0.130
8 0.315
"
16
"0.630
26
1.024
20
0.787
12
0.472
"13
"0.512
34
1.339
16
0.630
( )
( )
50
1.969
2 -M3 (length 10 0.394)
Hexagon-socket-head bolts
25.5
1.004
( )
7.7
0.303
17.8
0.701
47.53
1.8700.118
Conductive tube
(6 / 4 0.236 / 0.157)
"4
"0.157
"6
"0.236
500
19.685
Material: Urethane
Loading...