Operation and Maintenance Manual for MTS Rework Systems
|
P/N 5050-0520, Rev B |
|
|
Voltage |
Part Number |
MTS 200 SC System |
115 VAC |
8007-0414 |
MTS 200 SC System |
230 VAC |
8007-0415 |
MTS 200 SA System |
115 VAC |
8007-0412 |
MTS 200 SA System |
230 VAC |
8007-0413 |
MTS 300 System |
115 VAC |
8007-0418-B |
MTS 300 System |
230 VAC |
8007-0419-B |
MTS 350 System |
115 VAC |
8007-0416-B |
MTS 350 System |
230 VAC |
8007-0417-B |
(MTS 200 Shown with optional TD-100 and SX-80 Handpieces)
|
MTS Systems Operation Manual |
Table of Contents |
|
Introduction .............................................................................................................. |
3 |
Applicable Regulations ............................................................................................ |
3 |
Specifications ........................................................................................................... |
3 |
Environmental Requirements................................................................................... |
3 |
Electrical Specification ............................................................................................. |
4 |
Parts Identification.................................................................................................... |
4 |
Safety ....................................................................................................................... |
5 |
System Set-Up ......................................................................................................... |
5 |
Mounting Options ........................................................................................ |
5 |
System Power-Up ....................................................................................... |
5 |
Handpieces .............................................................................................................. |
6 |
Handpiece Tip & Tool Stands ..................................................................... |
6 |
Adjusting the Angle of the Cubby................................................................ |
6 |
Handpiece Connection................................................................................ |
6 |
Operation of MTS Systems...................................................................................... |
6 |
Vacuum Pump Operation......................................................................................... |
7 |
Handpiece Vacuum/Pressure .................................................................................. |
8 |
Accessories & Replacement Parts........................................................................... |
8 |
Corrective Maintenance ........................................................................................... |
9 |
Handpieces ................................................................................................. |
9 |
Power Source.............................................................................................. |
9 |
Packing Contents ..................................................................................................... |
9 |
Replacement Power Modules .................................................................................. |
9 |
Service ..................................................................................................................... |
9 |
PACE WORLDWIDE LIMITED WARRANTY STATEMENT.................................... |
10 |
Contact Information.................................................................................................. |
11 |
©2004 PACE Inc., Annapolis Junction, Maryland |
Page 2 of 11 |
All Rights Reserved |
|
MTS Systems Operation Manual
General Information
Introduction
The MTS family of rework systems offer the greatest level of flexibility for your operations. PACE offers 10 different handpieces that can be used with the MTS systems. MTS systems feature HEATWISE performance control technology. The key to HEATWISE is PACE’s POWERMODULES. Power Modules control the performance level of the attached handpiece(s) and a wide range of Power Modules are available. Power Modules are clearly visible from a distance so you can tell what performance level operators are using for quick and easy process verification and by restricting access to POWERMODULES, you can protect your process by locking operators into using the performance level you specify. The MTS 200 is available in a self contained version as well as a shop air version. The MTS 200 provides 2 handpiece channels that are active simultaneously. One channel can power any of PACE’s Heater Cartridge (HC) handpieces and the other can power any of PACE’s Fixed Heater (FH) Handpieces. See chart below. The MTS 300/350 provides 3 handpiece channels that are simultaneously active. The MTS 300 features 2 HC channels and one FH channel, the MTS 350 features 1 HC channel and 2 FH channels. The system also comes standard with AutoSetback and Auto-Off functions to preserve tip life.
Applicable Regulations
MTS systems are available in either 115 VAC or 230 VAC versions, which incorporate a highly responsive, closed loop control system providing up to 150 Watts of total output power. The 230 VAC version system bears the CE Conformity Marking, which assures the user that it conforms to EMC 89/336/EEC.
The 115 VAC version systems conform to FCC Emission Control Standard, Title 47, Subpart B, Class A. This standard is designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Specifications
Specification |
MTS 200 |
|
MTS 300/350 |
Power |
97-127 VAC 50/60 Hz, 200 W Max |
|
97-127 VAC 50/60 Hz, 200 W Max |
Requirements |
or |
|
or |
|
197-253 VAC 50/60 Hz, 200 W Max |
|
197-253 VAC 50/60 Hz, 200 W Max |
Dimensions |
184mm H x 107mm W x 122mm D |
|
184mm H x 107mm W x 122mm D |
|
(7.25” H x 4.2” W x 4.8” D) |
|
(7.25” H x 4.2” W x 4.8” D) |
Weight |
3.8 Kgs (8.3 lbs) |
|
|
Tip to Ground |
< 2 |
Ohms |
|
Resistance |
|
|
|
Temperature |
Within +/- 5 °C (9 °F), idle tip temperature |
||
Stability |
|
|
|
Abs. Temp. |
|
N/A |
|
Accuracy |
|
|
|
Performance |
260 °C - 454 °C (500 °F – 850 °F) |
||
Level Range |
Available Power Module Performance Levels: 5, 5.5, 6, 6.5, 7, 7.5, 8, & 8.5 |
||
Environmental Requirements
Ambient Operating Temperature: 0 ºC to 50 ºC (32 ºF to 120 ºF) Storage Temperature: -20 ºC to 75 ºC (-4 ºF to 170 ºF)
95% Humidity, non-condensing max.
©2004 PACE Inc., Annapolis Junction, Maryland |
Page 3 of 11 |
All Rights Reserved |
|
MTS Systems Operation Manual
Electrical Specifications
MTS 200 1.3 Amp 115 VAC, 60 Hz Max OR .7 Amp, 230 VAC, 50 Hz Max Fuse: 2 Amp, SloBlo 115 V System - 1 Amp TimeBlo, 230 V System
MTS 300 1.3 Amp 115 VAC, 60 Hz Max OR .7 Amp, 230 VAC, 50 Hz Max Fuse: 2 Amp, SloBlo 115 V System - 1 Amp TimeBlo, 230 V System
MTS-350 1.3 Amp 115 VAC, 60 Hz Max OR .7 Amp, 230 VAC, 50 Hz Max Fuse: 2 Amp, SloBlo 115 V System - 1 Amp TimeBlo, 230 V System
Parts Identification
Power Module Ports
Power Switch
Setback/Auto-
Off Switches
Earth Ground Receptacle
LED Indicators
Power Receptacles
Controllable Pressure
Port
MTS 200 Shown
Auto Snap-Vac Port
AC Power Receptacle/Fuse
Holder
©2004 PACE Inc., Annapolis Junction, Maryland |
Page 4 of 11 |
All Rights Reserved |
|
Loading...