NEC X461HB, P521, P401 Miscellaneous Information

NEC MPD-DTi

IPTV tuner module for NEC large-screen LCD displays

Add a new and exciting dimension to your digital signage. With the MPD-DTi tuner
module, your NEC large-screen LCD display can be transformed into a captivating
source of entertainment with the ability to run high-definition broadcasts and other
network programming. Supporting Unicast RTP or Multicast RTP, this tuner will fit any
UTP infrastructure streaming an IPTV signal as well as standard VHF/UHF antenna or
cable TV service signals over coax.

Specifications for MPD-DTi

TV

System
Channel Coverage

Format Decoding

Video

Audio

IPTV

Streaming Type
Network Protocol

Streaming Protocol

Multicast Protocol

Interface

Antenna Input
Video Output
Audio Output
Ethernet
USB

OSD Language
Power Supply
Power Consumption

Operational Environment

Temperature
Humidity

Storage Environment

Temperature
Humidity

Dimensions (W x H x D)

Net
Gross

Weight

Net
Gross

Complied Regulatory and Guidelines
Accessories
Limited Warranty

AAC LC, AAC LC+SBR Level 2, AAC+Level 2, AAC+Level 4

TCP/IP, UDP/IP, IPv4, HTTP 1.1, DNS Client, DHCP Client

RJ-45 Ethernet Port x 1 (10/100 Mbps Fast Ethernet)

* Dolby Digital: Manufactured under license from Dolby Laboratories.

ATSC/NTSC/Clear QAM

VHF: 2 - 13 ch

UHF: 14 - 69 ch

CATV: 1 - 125 ch

ATSC (8VSB): 2 - 69 ch

Digital Cable (Clear 64/256 QAM): 1 - 135 ch

MPEG-2 MP@HL and MP@ML

H.264/AVC main and high profile to level 4.1

VC-1 advanced profile @ level 3

VC-1 simple and main profile

Dolby Digital, Dolby Digital Plus*

MPEG I Layer1, 2, 3 (MP3)

Windows Media Audio (WMA)

Unicast, Multicast

RTP (Real-time Transport Protocol)

IGMP v2/v3

F Type Connector x 1

Composite Video RCA Connector x 1

Digital Audio S/P DIF Optical Connector x 1

USB (for service use only)

+16VDC@600mA (from option slot interface)

English/French/Spanish

9.6W

5 - 40°C / 41 - 104°F

20 - 80% (without condensation)

-10 - 60°C / 14 - 140°F

10 - 90% (without condensation)

6.1 x 1.6 x 11.1 in. / 155.5 x 40.5 x 281.5mm

8.6 x 3.4 x 14.5 in. / 218 x 86 x 369mm

2.6 lb. / 1.2 kg

3.3 lb. / 1.5 kg

FCC : Class B, Canadian DOC : Class B

User manual

3 years, parts and labor

Product Highlights

¤ Supports multiple video and audio codec along
with MPEG transport or program streams
¤ Auto scan function allows you to automatically
scan for available ATSC/NTSC channels pending
the source (air or cable)
¤ DTV signal strength easily recognizes the
strength of your digital signal
¤ Parental controls allows you to safeguard what
is seen by blocking programs based on rating or
channel
¤ Easily manipulate the style, size, font, and color
of your closed captioning
¤ DHCP or statically assign an IP address easily
from the on-screen display of your monitor

Key Markets

¤ Airports
¤ Public information
¤ Healthcare
¤ Corporate

Accessories

Applications

¤ Lobbies/waiting rooms
¤ Entertainment

www.necdisplay.com

What is IPTV?

Internet Protocol television (IPTV) is the delivery of programming by video stream encoded as a series of internet protocol packets (data
packets). IPTV primarily uses multicasting with Internet Group Management Protocol (IGMP) and Real Time Transport Protocol (RTP).
Compatible video compression standards include H.264, Windows Media Video 9, VC1 and MPEG-2. With the ability of category 5 cabling
infrastructures and Internet protocol, video signals can be broadcast over greater distances. Moving video across your network using data
packets enables you to control the quality of service, points of viewing as well as enhancing the user experience. The options are endless.

What is the difference between unicast and multicast?

Along with standard NTSC/ATSC/Clear QAM signals over coax, the NEC MPD-DTi allows the communication of your signal from the
source via unicast or multicast communications across UTP category cable. Unicast can be seen as a one-to-one relationship. A new
signal of the data is required for each end-user on a network even though the content remains exactly the same. This is often termed as a
point-to-point relationship and translates into an increase in bandwidth needed to run the same signal to multiple locations. In contrast,
multicast is the communication between a single sender and multiple receivers on a network requiring one stream of content for all end
users. In this scenario, multicast remains bandwidth-efficient because it requires only one stream of data for these multiple locations.

Unicast Example Multicast Example

Signal

source

Clients

Signal
source

Clients

How do I set up an IPTV network?

Similar to most IP-enabled devices on your network, you can set up your IPTV with all the necessary Internet protocol information. IPTV
runs over an IP network, which means it will work over your existing home or office Ethernet network. In simple environments, you need
a device housing and distributing your content along with a router or a switch to reach multiple locations. The diagram below shows a
simple setup scenario. For more complex networks, see your system administrator for details.

Unicast

Source router

all users receiving the
same channel

user 1

user 2

user 3

user 4

Multicast

Source router

all users receiving the
same channel

user 1

user 2

user 3

user 4

NEC Displays Supported

NEC V Series

42” V422
46” V462
55” V551
65” V651

NEC S Series

40” S401
46” S461
52” S521

NEC P Series

40” P401
40” P402
46” P461
46” P462
52” P521

55” P551
55” P552

70” P701

NEC X Series

46” X461UN
46” X462UN
46” X461HB
46” X462HB

46” X461UNV
55” X551UN

All brand or product names are trademarks or registered trademarks
of their respective holders. Product specifications subject to change.
1/12 ver. 3.

©2012 NEC Display Solutions of America, Inc. All rights reserved.

NEC Display Solutions

500 Park Boulevard, Suite 1100
Itasca, IL 60143
866-NEC-MORE