Mindray DP 3300VET User manual

DP-3300Vet

Digital Ultrasonic Diagnostic

Imaging System

Operation Manual

[Basic Volume]

© 2005-2006 Shenzhen Mindray Bio-medical Electronics Co., Ltd. All rights Reserved.

Product Information

Product Name: Digital Ultrasonic Diagnostic Imaging System
Model: DP-3300Vet
Issued date of this manual: 2006-02
Version: 1.2

This manual is applicable for the software of the DP-3300Vet system in 01.00.00 version, or the software
version above it, which does not affect the normal operation.

IMPORTANT!

The system is veterinary use only.

The labels of veterinary information are adhered with the system. Please refer to the following to
know the labels.

The following label applies to U.S.A only.

I-1

Intellectual Property Statement

SHENZHEN MINDRAY BIO-MEDICAL ELECTRONICS CO., LTD. (hereinafter called Mindray)
owns the intellectual property rights to this Mindray product and this manual. This manual may
refer to information protected by copyrights or patents and does not convey any license under
the patent rights of Mindray, nor the rights of others. Mindray does not assume any liability
arising out of any infringements of patents or other rights of third parties.
Mindray intends to maintain the contents of this manual as confidential information. Disclosure
of the information in this manual in any manner whatsoever without the written permission of
Mindray is strictly forbidden.

Release, amendment, reproduction, distribution, rent, adaptation and translation of this manual
in any manner whatsoever without the written permission of Mindray is strictly forbidden.

, , , , are the registered trademarks or
trademarks owned by Mindray in China and other countries. All other trademarks that appear in
this manual are used only for editorial purposes without the intention of improperly using them.
They are the property of their respective owners.

Responsibility on the Manufacturer Party

Contents of this manual are subject to changes without prior notice.

All information contained in this manual is believed to be correct. Mindray shall not be liable for
errors contained herein nor for incidental or consequential damages in connection with the
furnishing, performance, or use of this manual.

Mindray is responsible for safety, reliability and performance of this product only in the condition
that:

• all installation operations, expansions, changes, modifications and repairs of this product are

conducted by Mindray authorized personnel;

• the electrical installation of the relevant room complies with the applicable national and local

requirements;

• the product is used in accordance with the instructions for use.

WARNING: It is important for the hospital or organization that employs this

equipment to carry out a reasonable service/maintenance plan.
Neglect of this may result in machine breakdown or injury of
human health.

I-2

Warranty

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR PURPOSE.

Exemptions

Mindray's obligation or liability under this warranty does not include any transportation or other
charges or liability for direct, indirect or consequential damages or delay resulting from the
improper use or application of the product or the use of parts or accessories not approved by
Mindray or repairs by people other than Mindray authorized personnel.

This warranty shall not extend to:

 any Mindray product which has been subjected to misuse, negligence or accident;

 any Mindray product from which Mindray's original serial number tag or product

identification markings have been altered or removed;

 any product of any other manufacturer.

Return Policy

Return Procedure

In the event that it becomes necessary to return this product or part of this product to Mindray,
the following procedure should be followed:

1. Obtain return authorization: Contact the Mindray Service Department and obtain a

Customer Service Authorization (Mindray) number. The Mindray number must appear on
the outside of the shipping container. Returned shipments will not be accepted if the
Mindray number is not clearly visible. Please provide the model number, serial number, and
a brief description of the reason for return.

2. Freight policy: The customer is responsible for freight charges when this product is shipped

to Mindray for service (this includes customs charges).

3. Return address: Please send the part(s) or equipment to the address offered by Customer

Service department

I-3

Company Contact

Manufacture: Shenzhen Mindray Bio-Medical Electronics Co., Ltd.

Address:

Mindray Building, Keji 12th Road South, Hi-tech Industrial
Park, Nanshan, Shenzhen, P.R.China,518057

Phone: [phone] 26582888

Fax: [phone] 26582501

EC-

Representative:

Shanghai International Holding Corp. GmbH(Europe)

Address: Eiffestrasse 80, 20537 Hamburg Germany

Phone: [phone]

Fax: [phone]

I-4

Important Information

1. The responsibility for maintenance and management of the product after delivery resides

with the customer who has purchased the product.

2. The warranty does not cover the following items, even during the warranty period:

(1) Damage or loss due to misuse or abuse.
(2) Damage or loss caused by force majeure such as fires, earthquakes, floods, lightning,

etc.

(3) Damage or loss caused by failure to meet the specified conditions for this system,

such as inadequate power supply, improper installation, or unacceptable

environmental conditions.
(4) Damage or loss due to use outside the territory in which the system was originally sold.
(5) Damage or loss involving system purchased from a source other than Mindray or its

authorized agents.

3. This system shall not be used by persons other than fully qualified and certified medical
personnel.

4. Do not make changes or modifications to the software or hardware of this product.

5. In no event shall Mindray be liable for problems, damage, or loss caused by relocation,
modification, or repair performed by personnel other than those designated by Mindray.

6. The purpose of this system is to provide physicians with data for clinical diagnosis.
The responsibility for diagnostic procedures lies with the physicians involved. Mindray shall
not be liable for the results of diagnostic procedures.

7. Important data must be backed up on external recording media such as clinical records,
notebooks etc.

8. Mindray shall not be liable for loss of data stored in the memory of this system caused by
operator error or accidents.

9. This manual contains Warnings regarding foreseeable potential dangers. Be alert at all
times to dangers other than those indicated. Mindray shall not be liable for damage or loss
that results from negligence or from ignoring the precautions and operating instructions
contained in this operation manual.

10. On the occasion of change of the administrator or manager for this system, be sure to hand
over this operation manual.

I-5

Introduction

This operation manual describes the operating procedures for the DP-3300Vet system. To
ensure safe and correct operation of the system, carefully read and understand the manual
before operating the system.

1. Operation Manuals

Read this operation manual carefully before using the system in order to understand the
detailed operating procedures, functions, performance, and maintenance procedures. The
organization of the documents supplied with this system is shown below:

Main unit operation manual

Transducer operation

manuals

Describes detailed system information on
preparation, operating procedures, maintenance
checks, and functions.

Describe the operating and sterilization procedures
for transducers.

NOTE: For certain applications, the following manuals are available:

• (Advanced Volume)

2. Interface in This Operation Manual

This operation manual takes the highest configuration as an example to fully and systematically
introduce the functions and applications of the system. Since there are differences among
different configurations, what this manual introduces may be different from the system you
purchased.

I-6

Safety Precautions

1. Meaning of Signal Words

In this operation manual, the signal words DANGER, WARNING,

CAUTION and NOTE are used regarding safety and other important instructions. The signal

words and their meanings are defined as follows. Please understand their meanings clearly
before reading this manual.

Signal word Meaning

DANGER

Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.

NOTE

Indicates a potentially hazardous situation which, if not avoided, may
result in property damage.

2. Meaning of Safety Symbols

Symbol Description

Type-BF applied part

Note： All ultrasound transducers can be connected to this system are

Type-BF applied parts.

"Attention" indicates the points requiring attention. Be sure to read the
operation manual concerning these points before using the equipment.

S-1

3. Safety Precautions

Please observe the following precautions to ensure patient and operator safety when using this
system.

DANGER: Do not use flammable gasses such as anesthetic gas, oxygen or

hydrogen, or flammable liquids such as ethanol, near this product,
because there is danger of explosion.

WARNING:

1． Do connect the plug of this equipment and its peripheral equipments

to the wall receptacle meeting the rating nameplate. Using adapter or
multi-functional receptacle may affect system grounding
performance and thus cause leakage current exceeding safety
requirement. Please use the supplied power cable. No other power
cables should be used.

2． Be sure to connect the potential-equalization lead wire before

inserting the equipment power plug into the receptacle. Also, be sure
to remove the equipment power plug from the receptacle before
disconnecting the wire to avoid electrical shock.

3． Connect the earth conductor only before turning ON the system.

Disconnect the grounding cable only after turning OFF the system.
Otherwise, electric shock may result.

4． For the connection of power and grounding, follow the appropriate

procedures described in this operation manual. Otherwise, there is
risk of electric shock. Do not connect the grounding cable to a gas
pipe or water pipe, otherwise functional grounding may not be
effective or there may be risk of a gas explosion.

5． Do not connect this system to outlets with the same circuit breakers

and fuses that control current to devices such as life-support
systems. If this system malfunctions and generates an overcurrent,
or when there is an instantaneous current at power ON, the circuit
breakers and fuses of the building’s supply circuit may be tripped.

6． No waterproof device is applied to this equipment. Do not use this

equipment in any place with the possibility of water ingress. There is
risk of electric shock if any water is sprayed on or into the
equipment. If carelessly spray any water onto the equipment contact
the Mindray sales office, customer service department or
representative.

7． Use the transducer carefully. In case that the body contacts the

scratched transducer surface, immediately stop using the transducer
and contact the Mindray sales office, customer service department or
representative. There is risk of electric shock if using the scratched
transducer.

8． After the sterilization or disinfection of accessories, chemicals must

be washed out must be discharged thoroughly from the accessories.
Remaining residual chemicals or gases will not only result in damage
to the accessories but also can be harmful to human bodies.

9． Do not allow this system or other equipment to come into contact with

the patient. If this system or other equipment is defective, the patient
may receive an electric shock.

S-2

10. Do not use the transducers other than those specified by Mindray. If a
transducer other than those specified by Mindray is connected, the
equipment and the transducer may be damaged, causing an accident
such as a fire in the worst case.

11. Do not subject the transducers to knocks. Use of defective
transducers may cause an electric shock.

12. Do not open the shell or front panel. If open the shell when the
machine is powered on, there may be a short circuit or electric shock.

13. Do not use this system at the same time with other equipment such as
electric knife, high-frequency therapy equipment and defibrillator,
etc., Otherwise there is a danger of electric shock.

14. Precautions during transportation: When moving the equipment, first
turn it off and close up the keyboard, then disconnect it with other
devices(including transducer), disconnect it with power supply, and
wrap the power cable on the winding rack, finally lift it carefully by
handle and move it to a proper position.

15. Prolonged and repeated use of keyboards can result in hand or arm
nerve disorders in some individuals. Observe the local institution
work safety/health regulations on keyboard use.

16. Accessory equipment connected to the analogue and digital interfaces
must be complied with the relevant IEC standards. Furthermore all
configurations should comply with the standard IEC60601-1-1.
Anyone who connects additional equipment to the signal input part
or signal output part configures a medical system, and is therefore
responsible that the system complies with the requirements of
IEC60601-1-1. If in doubt, consult the technical services department
of your local representative.

CAUTION:

1． Precautions concerning clinical examination techniques

(1) This system must be used only by medical personnel fully

trained in clinical examination techniques.

(2) This operation manual does not describe clinical examination

techniques. Selection of the proper clinical examination
technique must be based on specialized training and clinical
experience.

2． Malfunctions due to radiowaves

(1) Use of radiowave-emitting devices in the proximity of this kind

of medical electronic system may interfere with its operation.
Do not bring or use devices which generate radio waves, such
as cellular telephones, transceivers, and radio controlled
toys, in the room where the system is installed.

(2) If a user brings a device which generates radio waves near the

system, they must be instructed to immediately turn OFF the
device. This is necessary to ensure the proper operation of
the system

3． Precautions concerning installation and movement of the system

(1) Do not place any objects on top of the system. They may fall,

causing injury.

S-3

(2) Confirm that the peripheral units are secured before moving

the system. Otherwise, the peripheral units may fall and
cause injury.

4 ． Please use the supplied or recommended peripheral devices and

optional parts. Please use the supplied cables. Using other devices
or cables may degrade the system performance and even cause an
electrical shock.

5． Always keep the machine dry. Avoid transporting this machine quickly

from the cold place to the warm place, otherwise condensation or
water drops may be formed, which will cause short circuit.

6． If the circuit breaker is tripped or the fuse is blown, it indicates that

the machine or the peripheral devices have problems. In these cases,
the user cannot repair by him but contact the Mindray sales office,
customer service department or representative.

7． There is no risk of high-temperature burns during routine ultrasound

examinations. To prevent high-temperature burns, do not apply the
transducer to the same spot on the patient for a long time. Apply the
transducer only for as long as required time for diagnosis.

8． Before cleaning the system, be sure to disconnect the power cable

from the outlet. If the system is defective, there is a risk of electric
shock.

9 ． Before examining a new patient, press [Patient] key to delete the

patient information and data recorded in the image memory for the
previous patient. Otherwise, the new data may be confused with the
data of the previous patient.

10. Do not pull out the system and its accessories plug without turn OFF
the power. Doing so may cause these equipment damaged even
electric shock.

11. Do not turn OFF the system during printing, saving, or invoking.
Otherwise may cause these processes to not operate correctly.

NOTE: 1. Do not use the machine in the vicinity of strong electromagnetic field (such as

the transformer), which may affect the performance of the monitor.

2. Do not use the machine in the vicinity of high-frequency radiation source (such
as the cellular phone), which may affect the performance of the machine or
even lead to failure.

3. To avoid damaging the machine, do not use the machine in following
environment:

(1) Locations exposed to direct sunlight;
(2) Locations subject to sudden changes in temperature
(3) Dusty locations
(4) Locations subject to vibration
(5) Locations near heat generators
(6) Locations with high humidity

4. Turn ON the system only after the power has been OFF for more than 5
seconds. If the system is turned ON immediately after being turned OFF, the
system may malfunction.

S-4

5. Turn OFF the system or stop transmission by [FREEZE] key before connecting
or disconnecting a transducer. Otherwise, it may result in malfunction of the
system and/or the transducer.

6. After using the transducer, remove the gel (acoustic coupler) on it and place the
transducer on the transducer holder. Otherwise, water in the gel may enter the
acoustic lens, thus adversely affecting the performance and safety of the
transducer.

7. The user can record patient data (including hospital data and patient data). To
ensure the security of the data, be sure to back up the data on external
storage media. Data stored in the equipment may be lost due to improper
operation or an accident.

8. If this equipment is used in a small room, the room temperature may rise.
Proper ventilation must be provided.

9. The fuse inside the machine can be replaced only by the Mindray service
engineer or the technician specified by MINDRAY.

10. When disposing of this system or any part of the system, contact Mindray sales
office, customer service department or representative. Do not dispose of this
system without consulting Mindray sales office, customer service department
or representative first. Mindray does not assume any responsibility for damage
resulting from disposal of this system without consulting MINDRAY.

11. Deterioration of electrical and mechanical safety characteristics (such as
generation of a leakage current or deformation/abrasion of mechanical parts)
and of image sensitivity and resolution may occur over a period of time. To
guarantee the normal performance of the equipment, it is proposed to enter
into an agreement on maintenance and service to prevent accident.

12. Please use the USB storage device compliant with the relevant local
regulations. The format of the USB storage device file system should be FAT or
FAT32, and the instruction is SCSI.

13. Some USB portable hard disks must be connected to the external power（the
external power must be compliant with the relevant local regulations ） ,
otherwise they can not be distinguished.

NOTE: The following definition of the WEEE label applies to EU member
states only: The use of this symbol indicates that this product should not
be treated as household waste. By ensuring that this product is disposed
of correctly, you will help prevent bringing potential negative
consequences to the environment and human health. For more detailed
information with regard to returning and recycling this product, please
consult the distributor from whom you purchased the product.

* For system products, this label may be attached to the main unit only.

S-5

4. WARNING Labels

Various warning labels are attached to this system in order to call the user's attention to
potential hazards.

The symbol on the warning labels attached to the system indicates safety
precautions. The warning labels use the same signal words as used in the descriptions in

the operation manuals.
Detailed information about the warning labels is given in the main body of this operation
manual. Read the operation manual carefully before using the system.
The name, appearance, and the indication of each warning label are shown as follows.

No. Label Meaning

<1> Cautions that no object or force or any stress is

added on keyboard. Close up the keyboard before
moving the equipment.

<2> (a) Cautions that the system must not be used

around flammable gasses, otherwise there
may be risk of explosion.

(b) Urges Caution related to handling of the

transducers.
For handling of the transducers, refer to the
transducers’ operation manual.

<3> (a) Cautions that the system must not be

removed covers because the high voltage
may cause electric shock.

S-6

Contents

Contents ........................................................................................................1

1 Intended Use .................................................................................................................. 1

2 Specifications ................................................................................................................ 1

2.1 Conditions .............................................................................................................. 1

2.2 External dimensions and mass .............................................................................. 1

3 System Configuration ................................................................................................... 1

3.1 Basic Configuration .................................................................................................. 1

3.2 Available Transducers .............................................................................................. 1

3.3 Peripheral Devices ................................................................................................... 1

4 System Overview ........................................................................................................... 1

4.1 Name of Each Part ................................................................................................... 1

4.2 Rear panel ............................................................................................................... 3

4.3 Control Panel ........................................................................................................... 4

4.4 Symbols ................................................................................................................... 5

5 Preparation for Examination ........................................................................................ 1

5.1 Moving and placing the System ............................................................................... 1

5.2 Connect/Disconnect the Transducer ........................................................................ 1

5.2.1 Connecting the Transducer ...................................................................................... 1

5.2.2 Disconnecting the transducer ................................................................................... 2

5.3 Connecting the Power Cable and Protective Earth ................................................. 2

5.3.1 Power connection ..................................................................................................... 2

5.3.2 Grounding Terminal .................................................................................................. 2

5.3.3 Equipotential Terminal .............................................................................................. 3

6 Power ON/OFF ............................................................................................................... 1

6.1 Power On ................................................................................................................. 1

6.1.1 Check the items below before turning the power ON .............................................. 1

6.1.2 Turning On the Power .............................................................................................. 1

6.2 Power OFF ............................................................................................................... 2

6.3 Power OFF/ON in the case of system failure .......................................................... 2

7 Checks Before and After Use ....................................................................................... 1

7.1 Checks before use ................................................................................................... 1

7.2 Checks after Use ..................................................................................................... 1

8 Basic Screen and Menu ................................................................................................ 1

8.1 Display of Parameter Items ..................................................................................... 1

8.2 Image Mode ............................................................................................................. 2

8.3 Menu and menu options .......................................................................................... 3

8.3.1 Command Items ....................................................................................................... 3

8.3.2 Number Items ........................................................................................................... 4

8.3.3 Switch Items ............................................................................................................. 4

8.3.4 Character Items ........................................................................................................ 5

8.3.5 Submenu Items ........................................................................................................ 5

8.4 Dialog Box ................................................................................................................ 6

C-1

8.4.1 Operation for content of dialogue box ...................................................................... 6

8.4.2 Changing page ......................................................................................................... 7

8.4.3 Dragging the dialogue box ....................................................................................... 7

8.4.4 Confirm or cancel operation, and close dialogue box .............................................. 7

9 Examination Beginning ................................................................................................ 1

9.1 Selecting the Exam Mode ........................................................................................ 1

9.2 Entering the Patient Information .............................................................................. 1

10 Presets .......................................................................................................................... 1

10.1 Introduction ............................................................................................................ 1

10.2 Enter/Exit Preset Mode .......................................................................................... 1

10.2.1 Enter the preset mode ............................................................................................ 1

10.2.2 Exit Preset mode .................................................................................................... 1

10.3 Display/Modify Preset Information ......................................................................... 2

10.3.1 Procedures to modify the preset values ................................................................. 2

Image Control and Adjustment ...................................................................................... 1

11.1 B/M Gain ................................................................................................................ 1

11.2 Acoustic Power ....................................................................................................... 2

11.3 TGC ........................................................................................................................ 2

11.4 IP ............................................................................................................................ 3

11.5 Transducer Frequency ........................................................................................... 3

11.6 Focus position and Focus number ......................................................................... 3

11.6.1 Adjusting the position of focus ................................................................................ 4

11.6.2 Adjusting the number of focuses ............................................................................ 4

11.7 Image Zoom, Depth ............................................................................................... 4

11.7.1 Zoom ....................................................................................................................... 4

11.7.2 Depth ...................................................................................................................... 5

11.8 Image Reverse ....................................................................................................... 5

11.9 Dynamic Range ...................................................................................................... 6

11.10 Edge Enhancement .............................................................................................. 6

11.11 Smooth ................................................................................................................ 6

11.12 Frame Average ..................................................................................................... 6

11.13 M Speed ............................................................................................................... 6

11.14 Scan line density ................................................................................................. 6

11.15 Gray map ............................................................................................................ 7

11 Cine Review Function ................................................................................................. 1

12.1 Introduction ............................................................................................................ 1

12.2 Cine Review ........................................................................................................... 1

12.2.1 Manual Review ....................................................................................................... 1

12.2.2 Auto Review ........................................................................................................... 1

12.2.3 Others ..................................................................................................................... 2

12 Entry and Deletion of Comments .............................................................................. 1

13.1 Enter/exit Comment Status .................................................................................... 1

13.2 Input Comments from the Keyboard ...................................................................... 1

13.3 Input Comments from Comment Library ................................................................ 1

13.4 Input Arrow Comment ............................................................................................ 2

13.5 Move Existing Comment Items .............................................................................. 2

C-2

13.6 Modifying the Comments ....................................................................................... 2

13.7 Deletion of Comment ............................................................................................. 3

13.7.1 Delete characters .................................................................................................. 3

13.7.2 Delete arrows ........................................................................................................ 3

13.7.3 Delete all comments and arrows ........................................................................... 3

13.7.4 Delete Items in Reverse Sequence ........................................................................ 3

13.8 Comment library ..................................................................................................... 3

13 Body Mark .................................................................................................................... 1

14.1 Introduction ............................................................................................................ 1

14.2 Enter/Exit the Body Mark mode ............................................................................. 2

14.3 Add Body Mark ....................................................................................................... 2

14.4 Moving Body Mark ................................................................................................. 3

14.5 Clearing Body Mark ............................................................................................... 3

14 Measurements and Calculations ............................................................................... 1

15.1 Basic Operation ..................................................................................................... 1

15.1.1 Enter Measurement Status ..................................................................................... 1

15.1.2 Measurement Menu ............................................................................................... 1

15.1.3 Measured Result and Help Information .................................................................. 2

15.1.4 Keys Used in Measurement ................................................................................... 2

15.1.5 Classification of Measurements and Calculations ................................................. 3

15.2 B-mode Measurements ......................................................................................... 3

15.3 M-mode Measurements ......................................................................................... 3

15 File System .................................................................................................................. 1

16.1 General .................................................................................................................. 1

16.1.1 Storage Medium ..................................................................................................... 1

16.1.2 File Menu ................................................................................................................ 1

16.2 Default Path and Default File Naming Rule ........................................................... 1

16.2.1 Setting the default path .......................................................................................... 1

16.2.2 Naming rule of default filename ............................................................................. 2

16.3 Saving/Opening a File ............................................................................................ 2

16.3.1 Quick saving a file .................................................................................................. 2

16.3.2 General saving a file ............................................................................................... 3

16.3.3 Opening a file ......................................................................................................... 4

16.4 DICOM ................................................................................................................... 5

16.4.1 Sending the DCM images ...................................................................................... 5

16.4.2 Sending the DCM files ............................................................................................ 6

16.5 File Management ................................................................................................... 6

16.5.1 Directory management ........................................................................................... 6

16.5.2 File management .................................................................................................... 8

16.6 Disconnect USB Storage Device Safely ................................................................ 9

Needle Guide ................................................................................................................... 1

17.1 Enter/Exit Needle Guide Mode .............................................................................. 1

17.2 Select the Angle of Needle Guide Line .................................................................. 2

17.3 Hide/Display Needle Guide Lines .......................................................................... 2

17.4 Adjust Needle Guide Line ...................................................................................... 2

16 Acoustic Power Principle ........................................................................................... 3

C-3

18.1 Concerns with Bioeffects ....................................................................................... 3

18.2 Prudent Use Statement ......................................................................................... 3

18.3 ALARA (As Low As Reasonably Achievable) ......................................................... 3

18.4 Parameters Affecting Acoustic Power .................................................................... 3

18.5 Acoustic Power Setting .......................................................................................... 3

18.6 Imaging functions that change acoustic output power ........................................... 4

18.7 References for Acoustic Power and Safety ........................................................... 4

17 Maintenance Check ..................................................................................................... 5

19.1 Maintenance Checks to Be Carried Out by Customers ......................................... 5

19.1.1 Cleaning the system ............................................................................................... 5

19.1.2 Creating a backup copy of the system hard disk ................................................... 6

19.2 Maintenance Checks to Be Carried Out by Service .............................................. 6

19.3 Consumable Parts and Parts Requiring Periodic

Replacement .................................................................................................................. 6

19.4 Troubleshooting ..................................................................................................... 6

18 Accuracy of Measurement .......................................................................................... 1

19 Safety Classification ................................................................................................... 1

20 Guidance and Manufacturer's Declaration ............................................................... 1

21 Indication of Year of Manufacture .............................................................................. 1

C-4

1Intended Use

The DP-3300Vet digital ultrasonic diagnostic imaging system can be used in animal examination
only, including abdomen, obstetrics, cardiac and small parts (breast, thyroid, testes, etc.)
ultrasonic examinations.

Contraindication: none

1

2Specifications

2.1 Conditions

(1) Power

Line voltage : 100－240 V～

Line frequency : 50 / 60Hz

Power consumption : 150 VA

(2) Operating environmental conditions

Ambient temperature : 5°C to 40°C

Relative humidity : 35% to 85% (no condensation)

Atmospheric pressure : 700 hPa to 1060 hPa

(3) Storage and transportation conditions

Ambient temperature : -20°C to 55°C

Relative humidity : 30% to 85% (no condensation)

Atmospheric pressure : 700 hPa to 1060 hPa

NOTE: The line voltage differs depending on the area.

2.2 External dimensions and mass

(a) External dimensions (excluding handle, winding rack, wire hanging rack, etc):

265mm broad × 410 mm length × 330 mm height

(b) Mass (excluding optional units): Approx. 12 kg

1

3System Configuration

3.1 Basic Configuration

(1) Main unit
(2) Manuals

(3) Accessories (Refer to the package list for details.)

3.2 Available Transducers

Transducer model Intended use Applicable parts

35C50EB Abdomen, pediatrics and obstetrics

examinations

Body surface

35C20EA Obstetrics, abdomen and cardiac Body surface
65C15EAV Small animal’s abdomen, heart, eyeball

and thorax

Body surface

75L38EB Small parts (breast, thyroid, testes, etc.),

neonatal cephalic, peripheral vascular,
muscular-skeletal (conventional,
superficial)

Body surface

75L50EAV Big animal’s reproductive system, etc transrectal
50L60EAV Big animal’s reproductive system, etc transrectal
75L60EA Small parts (breast, thyroid, testes, etc.),

neonatal cephalic, peripheral vascular,
muscular-skeletal (conventional,
superficial)

Body surface

3.3 Peripheral Devices

No. Name Model

1 Video printer

Sony UP-895MD

Sony UP-897MD

MITSUBISHI P93W

2 Graph/text printer

HP DeskJet 5652/5650（USB port）
Business Inkjet 1200（USB port）
HP Laserjet2420d（USB port）

HP DeskJet6548（USB port）

3 Mobile Trolley UMT-100

1

4System Overview

NOTE: All figures in the manuals are only for reference, what are shown in the figures may

be different from the actual system because of configurations.

4.1 Name of Each Part

Front view

View with Mobile trolley

NOTE: the mobile trolley is optional parts.

1

Hook for transducer
cable

Monitor

Basic Screen and Menu

Right side view

Left side view

2

Winding rack

USB port

Handle

Transducer holder

Control Panel

Transducer socket

Basic Screen and Menu

No. Name Introduction
<1> Monitor Display images and parameters etc. Special

10″non-interlaced VGA
<2> Hook for transducer cable Hook to the transducer cable
<3> Handle Use to lift the machine
<4> Transducer Holder Place transducer provisionally
<5> Transducer Socket （ can be

configured as 2）

Connect or disconnect transducer with host

<6> Control panel Interface for human-machine dialogue, for

various operation
<7> Winding rack Used for power cable
<8> USB port Used for USB storage device and so on.

4.2 Rear panel

<1>
<5>

<4>

<3>

<2>

Rear view

No. Name Introduction
<1> Equipotential terminal Equipotential terminal connecting

3

Basic Screen and Menu

<2> video printer data port Data port for video printer（PAL or NTSC）
<3> Control port for video

printer

Use to control video printer remotely

<4> Main Power Turn on/off the power of the system
<5> AC input AC power input inlet for system unit

4.3 Control Panel

<1>

<2> <3>

<4>

<5> <6>

<7>

<8>

<9>

<10>

<11>

<12>

<13>

<14>

<15>

<16>

<17>

<19>

<18> <20>

<21>

<24><23>

<22>

<26>

<25>

<27>

<28>

<30>

<29>

<31>

Control panel

No. Key name Function

<1>

Patient Delete the previous patient’s data in the temporary

memory, get ready for new patient examination

<2>

Info. Patient information display, input or change

<3>

File Save or load files, enter into preset mode

<4>

EXAM Select exam modes through menu: Abd, Car, Ob, Sml

<5>

Blank key1 No function

<6>

Blank key2 Switch the transducer（under the precondition of the

system has been configured 2 transducer sockets）

<7>

Freq. Switch the transmission frequency of transducer

4

Basic Screen and Menu

<8>

Character & number
keys

Input characters and symbols

SHIFT+ character or number input the symbol in the row
above of the same key.

Press CAPS key, input the corresponding capital letter

<9>

TGC In terms of depth apart from body surface, adjust the

receiving sensitivity of ultrasonic echo

<10>

Cine Enter/exit manual CINE review mode

<11>

F.position

Adjust focus position

<12> IP Adjust image processing parameters

<13>

Print Video print

<14>

Measure Enter measurement mode

<15>

Body Mark Enter the mode of Body Mark edit

<16>

Comment Enter comment mode

<17>

Menu Open or close menu according to system

<18>

Set Fix option, and fix cursor position of comment and

measurement, etc.

<19>

Change During measurement switch between movable end and

fixed end of scale, and open comment library

<20>

Back Go back to previous step

<21>

Trackball Adjust cursor position

<22>

Gain Adjust gain of image

<23>

B Enter B mode

<24>

B/B Enter dual B mode

<25>

VRev Reverse image vertically

<26>

M/B Enter M/B mode

<27>

M Enter M mode

<28>

HRev Reverse image horizontally

<29>

Zoom/Depth switch

Switch the ship-like key to zooming state or depth
adjusting state

<30>

Ship-like key Adjust image magnification or depth

<31>

Freeze Freeze/unfreeze image, If the image is frozen,

transmission of acoustic power will stop.

4.4 Symbols

This system uses the following symbols, whose meanings are described in the table
below. For safety symbols, refer to “Safety Precautions”.

Symbol Description

!

Consult the Operation Manual when this sign is encountered
on the machine to prevent safety accidents.

Danger voltage.

5

Basic Screen and Menu

AC (Alternating current)

Equipotentiality

Main switch OFF
Main switch ON

A

Transducer socket A

B

Transducer socket B

Serial number

Date of manufacture

Address of manufacturer

Address of EC representative

The device is fully in conformance with the Council Directive
Concerning Low Voltage Directive 73/23/EEC and Directive of
Electromagnetic Compatibility 2004/108/EC.

6