|
|
|
|
|
|
|
|
|
|
|
GB |
Cordless Screwdriver |
Instruction Manual |
|
|
|
|
|
|
|
|
Visseuse sans fil |
Manuel d’instructions |
|
|
F |
|||
|
|
|
|
|
|
|
Akku-Schrauber |
Betriebsanleitung |
|
|
D |
|||
|
|
|
|
|
|
|
Avvitatrice a batteria |
Istruzioni per l’uso |
|
|
I |
|||
|
|
|
|
|
|
|
Snoerloze schroevendraaier |
Gebruiksaanwijzing |
|
|
NL |
|||
|
|
|
|
|
|
|
Atornillador a batería |
Manual de instrucciones |
|
|
E |
|||
|
|
|
|
|
|
|
Aparafusadora a bateria |
Manual de instruções |
|
|
P |
|||
|
|
|
|
|
|
|
Akku skruemaskine |
Brugsanvisning |
|
|
DK |
|||
|
|
|
|
|
|
|
Sladdlös momentskruvdragare |
Bruksanvisning |
|
|
S |
|||
|
|
|
|
|
|
|
Akku momentskrutrekker |
Bruksanvisning |
|
|
N |
|||
|
|
|
|
|
|
|
Langaton ruuvinväännin |
Käyttöohje |
|
|
SF |
|||
|
|
|
|
|
|
|
Ασύρµατ κατσα ίδι |
δηγίες ρήσεως |
|
|
GR |
|||
|
|
|
|
|
6791D
6792D
6793D
6794D
6795D
|
1 |
A |
|
|
B |
|
4 |
3 |
|
2 |
|
1 |
2 |
|
6
5
3 |
4 |
9
7
8
5 |
6 |
2
ENGLISH
Explanation of general view
1 |
Battery cartridge |
4 |
Bit |
7 |
Adjusting knob |
2 |
Set plate |
5 |
Switch trigger |
8 |
Arrow |
3 |
Sleeve |
6 |
Reversing switch |
9 |
Stopper |
|
|
|
|
|
|
SPECIFICATIONS
Model |
6791D |
6792D |
6793D |
6794D |
6795D |
Capacities |
|
|
|
|
|
Nut .............................. |
4 – 8 mm |
4 – 6 mm |
4 – 8 mm |
4 – 6 mm |
3 – 5 mm |
Tool screw ................... |
4 – 8 mm |
4 – 6 mm |
4 – 8 mm |
4 – 6 mm |
3 – 5 mm |
No load speed (min-1) .... |
400 |
650 |
400 |
650 |
1,700 |
Overall length ................ |
183 mm |
183 mm |
183 mm |
183 mm |
178 mm |
Net weight ...................... |
1.4 kg |
1.4 kg |
1.4 kg |
1.4 kg |
1.5 kg |
Rated voltage ................ |
D.C. 9.6 V |
D.C. 9.6 V |
D.C. 9.6 V |
D.C. 9.6 V |
D.C. 9.6 V |
|
|
|
|
|
|
•Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•Note: Specifications may differ from country to country.
Intended use
The tool is intended for screw driving in wood, metal and plastic.
Safety hints
For your own safety, please refer to the enclosed safety instructions.
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE
ENC004-1
1.Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
2.Do not disassemble battery cartridge.
3.If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion.
4.If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight.
5.Always cover the battery terminals with the battery cover when the battery cartridge is not used.
6.Do not short the battery cartridge:
(1)Do not touch the terminals with any conductive material.
(2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
(3)Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
7.Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F).
8.Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.
9.Be careful not to drop or strike battery.
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life
1.Charge the battery cartridge before completely discharged.
Always stop tool operation and charge the battery cartridge when you notice less tool power.
2.Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life.
3.Charge the battery cartridge with room temperature at 10°C – 40°C (50°F – 104°F). Let a hot battery cartridge cool down before charging it.
4.Charge the Nickel Metal Hydride battery cartridge when you do not use it for more than six months.
ADDITIONAL SAFETY RULES FOR TOOL
1.Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical outlet.
2.Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations.
3.Hold the tool firmly.
4.Keep hands away from rotating parts.
5.When driving into walls, floors or wherever “live” electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL! Hold the tool only by the insulated grasping surfaces to prevent electric shock if you drive into a “live” wire.
SAVE THESE INSTRUCTIONS.
OPERATING INSTRUCTIONS
Installing or removing battery cartridge (Fig. 1)
•Always switch off the tool before insertion or removal of the battery cartridge.
•To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool.
•To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Snap the set plate back into place. Be sure to close the set plate fully before using the tool.
3
Loading...