Operating and installation instructions
Combined fridge-freezer with BioFresh compartment for integrated use, door-on-door
16/08 7082530 - 02
ICB/ICBN ... 6
Appliance at a glance
Contents |
|
|
1 |
Appliance at a glance............................................ |
2 |
1.1 |
Range of appliance use............................................ |
2 |
1.2 |
Conformity................................................................ |
2 |
1.3 |
Appliance and equipment overview.......................... |
2 |
1.4 |
Net@Home............................................................... |
3 |
2 |
General safety information................................... |
3 |
3 |
Controls and displays........................................... |
3 |
3.1 |
Operating and control elements............................... |
3 |
3.2 |
Temperature display................................................. |
3 |
4 |
Putting into operation............................................ |
4 |
4.1 |
Changing the door hinges........................................ |
4 |
4.2 |
Installation................................................................ |
4 |
4.3 |
Transporting the appliance....................................... |
8 |
4.4 |
Installing the appliance............................................. |
8 |
4.5 |
Disposing of packaging............................................ |
8 |
4.6 |
Connecting the appliance......................................... |
9 |
4.7 |
Switching on the appliance....................................... |
9 |
5 |
Control.................................................................... |
9 |
5.1 |
Saving energy.......................................................... |
9 |
5.2 |
Brightness of the temperature display...................... |
9 |
5.3 |
Child proofing........................................................... |
9 |
5.4 |
Door alarm................................................................ |
9 |
5.5 |
Temperature alarm................................................... |
10 |
5.6 |
Refrigerator compartment........................................ |
10 |
5.7 |
BioFresh compartment............................................. |
11 |
5.8 |
Freezer compartment............................................... |
12 |
6 |
Maintenance........................................................... |
14 |
6.1 |
Manual defrosting..................................................... |
14 |
6.2 |
Defrosting with NoFrost............................................ |
14 |
6.3 |
Cleaning the appliance............................................. |
14 |
6.4 |
Customer service..................................................... |
15 |
7 |
Malfunction............................................................. |
15 |
8 |
Decommissioning.................................................. |
16 |
8.1 |
Switching off the appliance....................................... |
16 |
8.2 |
Taking the appliance out of service.......................... |
16 |
9 |
Disposing of the appliance................................... |
16 |
The manufacturer works constantly on the further development of all the types and models. Therefore please understand that we have to reserve the right to make design, equipment and technical modifications.
To get to know all the benefits of your new appliance, please read the information contained in these instructions carefully.
The instructions apply to several models. Differences may occur. Text relating only to specific appliances is marked with an asterisk (*).
Instructions for action are marked with a , the results of action are marked with a .
1 Appliance at a glance
1.1 Range of appliance use
The appliance is designed for cooling food, for freezing and storing food and for making ice.
The appliance was designed for household use. It is not intended for commercial use, in particular it is not meant for laboratory purposes and the like. There is the danger of malfunction.
The appliance is set to operate within specific ambient temperature limits according to its climate rating. The correct climate rating for your appliance is indicated on the type plate.
Note
u Compliance with the ambient temperatures indicated is required, otherwise the cooling performance is reduced.
Climate rat- |
for ambient temperatures of |
ing |
|
SN |
10 °C to 32 °C |
N |
16 °C to 32 °C |
ST |
16 °C to 38 °C |
T |
16 °C to 43 °C |
1.2 Conformity
The refrigerant circuit has been tested for leaks. When installed, this appliance complies with the relevant safety provisions and EC directives 2006/95/EC and 2004/108/EC.
1.3 Appliance and equipment overview
(1)Operating and control elements
(2)Butter and cheese compartment
(3)Fan
(4)Shelf, relocatable
(5)Egg tray*
(6)Shelf, sectioned*
(7)Interior light, refrigerator compartment*
(8)Storage rack for tall bottles
Fig. 1
(11)DrySafe
(12)HydroSafe
(13)Type plate
(14)Interior light, Biofresh compartment*
(15)Cold storage accumulator*
(16)Interior light, freezer compartment*
(17)Information system*
(18)IceMaker*
2
General safety information
(9) Integrated bottle shelf or |
(19) Freezer tray* |
glass shelf |
(20) VarioSpace* |
(10) Drain opening |
1.4 Net@Home
The appliance can be provided with the retrofit modules for the HomeDialog system or the serial interface (RS 232), depending on model and equipment. The modules are available from your specialist dealer.
You will find more information on the internet at www.liebherr.com.
2 General safety information
Danger for the user:
-This appliance is not designed for persons (including children) with physical, sensory or mental impairment or persons not having sufficient experience and knowledge, unless they are instructed in the use of the appliance and are initially supervised by a person responsible for their safety. Keep children under supervision to ensure they do not play with the appliance.
-In case of a fault, pull out the mains plug (not by pulling the connecting cable) or switch off the fuse.
-Have any repairs to or intervention in the appliance, and any change of the mains power cable, carried out by the customer service only or by other specialised personnel trained for the purpose.
-When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable.
-Install and connect the appliance only as instructed.
-Please keep these instructions in a safe place and pass them on to any subsequent owners.
Fire hazard:
-The refrigerant R 600a is environmentally friendly but flammable. Escaping refrigerant may ignite.
•Do not damage the refrigerant circuit pipes.
•Do not allow naked flames or ignition sources to enter the appliance.
•Do not use any electrical appliances in the interior (e.g. steam cleaners, heaters, ice cream maker etc.).
•If refrigerant escapes: eliminate naked flames or sources of ignition from the vicinity. Pull out the power plug. Ventilate the area well. Notify customer service.
-Do not store explosives or sprays using combustible propellants such as butane, propane, pentane, etc. in the appliance. Respective spray cans can be identified by reference to the contents printed on the can or by a flame symbol. Gases possibly escaping may ignite due to electrical components.
-Only store high-percentage alcohol in tightly sealed, upright containers. Alcohol possibly escaping may ignite due to electrical components.
Danger of tipping and falling:
-Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particularly to children.
Danger of food poisoning:
- Do not consume food which has been stored too long.
Danger of frostbite, numbness and pain:
-Avoid lasting skin contact with cold surfaces or refrigerated/ frozen food or take protective steps, e.g. wear gloves. Do not consume ice cream, water ice or ice cubes immediately and do not consume them too cold.
Please observe the specific information in the other sections:
|
DANGER |
identifies a situation involving direct |
|
|
danger which, if not obviated, may re- |
|
|
sult in death or severe bodily injury. |
|
WARNING |
identifies a dangerous situation |
|
|
which, if not obviated, may result in |
|
|
death or severe bodily injury. |
|
CAUTION |
identifies a dangerous situation |
|
|
which, if not obviated, may result in |
|
|
minor or medium bodily injury. |
|
ATTENTION |
identifies a dangerous situation |
|
|
which, if not obviated, may result in |
|
|
damage to property. |
|
|
|
|
Note |
identifies useful information and tips. |
3 Controls and displays
3.1 Operating and control elements
(1) |
Alarm button |
(7) |
Fig. 2 |
Temperature display re- |
|||
(2) |
SuperFrost button |
(8) |
frigerator compartment |
Child lock symbol |
|||
(3) |
On/Off button freezer |
(9) |
Down setting button refrig- |
(4) |
compartment |
|
erator compartment |
Down setting button |
(10) Up setting button refrigera- |
||
(5) |
freezer compartment |
|
tor compartment |
Up setting button freezer |
(11) On/Off button refrigerator |
||
(6) |
compartment |
|
compartment |
Temperature display |
(12) SuperCool button |
||
|
freezer compartment |
|
|
3.2 Temperature display
The following are displayed in normal operation:
-the warmest freezing temperature
-the average cooling temperature
The freezer compartment temperature display flashes:
-the temperature setting is being changed
-after switch-on the temperature is not yet cold enough
-the temperature has risen several degrees
Dashes flash in the display:
- the freezer temperature is above 0 °C.
The following displays indicate malfunction. You will find possible causes and corrective action in the section on troubleshooting.
-nA
-F0 to F5
3
Putting into operation
4 Putting into operation
4.1 Changing the door hinges
ATTENTION*
Risk of damage to side-by-side appliances by condensate!
A side-by-side (SBS) appliance may be installed only with the door hinges as delivered.
u Do not change over the door hinges.
Make sure the following tools are to hand:
q spanner 13
q cordless screwdriver Torx 15, 20, 25, 30
Slide the appliance 2/3 of the way into the recess. Pull out the mains plug.
Open the doors.
4.1.1 To detach the soft stop mechanism
CAUTION
Risk of injury if soft stop contracts! u Detach with care.
Fig. 3
u Unscrew holder Fig. 3 (1).
u Unscrew the ball stud Fig. 3 (3) together with the soft stop mechanism Fig. 3 (2) from the door and set it aside.
4.1.2 To change the hinges
Fig. 4
uLift off the covers Fig. 4 (5,6,7,8) forwards using a flat-blade screwdriver.
uLoosen the top and bottom screws Fig. 4 (9) on the appliance body, without removing them.
uPull the doors outwards and detach them.
uTransfer the screws Fig. 4 (9) to the opposite side and screw them in a little.
uUndo the screws Fig. 4 (10) and change over the hinges diagonally.
The screws Fig. 4 (10) are self-tapping: use a cordless screwdriver.
u Screw the hinges tight.
u Place plugs Fig. 4 (11) in the now unused fastening holes. u Attach the doors to the prefitted screws Fig. 4 (9) and tighten
the screws.
4.1.3 Re-fit the soft stop mechanism
Fig. 5
uScrew on the holder Fig. 5 (1).
uScrew the ball stud Fig.5 (3) together with the soft stop mechanism Fig. 5 (2) into the fastening hole.
uRe-fit all the covers Fig. 4 (5,6,7,8).
4.2 Installation
All the fasteners accompany the appliance.
Fig. 6
Fig. 7
Fig. 8
Ensure that the following tools are to hand:
q cordless screwdriver Torx®15, 20, 25 q spanner 13
The shelf and side walls of the unit must be at right-angles to one another. Align the unit with a spirit level and an angle. If necessary, level out by building up from underneath.
4
Putting into operation
The appliance can also be installed in an ordinary kitchen cabinet. In this case detach the fittings of the unit door and recess. They are no longer needed as the unit door is fitted to the appliance door.
Note
u Before assembling the door of the unit, make sure that the admissable weight of the unit door is not exceeded.
u Otherwise damage to the hinges and resultant malfunction cannot be ruled out.
|
Max. weight of unit door |
Refrigerator compartment door |
20 kg |
Freezer compartment door |
12 kg |
Check installation dimensions:
|
A |
B |
C |
ICB 31 |
1772 mm - 1788 mm |
1770 mm |
549 mm |
ICBN 30 |
1772 mm - 1788 mm |
1770 mm |
695 mm |
Fig. 9
4.2.1 Assembling appliance
Fig. 10
u Detach the connecting cable from the back of the appli- |
||
ance, removing the cable holder because otherwise |
||
there will be vibratory noise! |
||
u Lay the connecting cable with the |
||
help of a string in such a way that |
||
the appliance can be easily con- |
||
nected after fitting. |
|
|
u Slide the appliance 2/3 of the way |
||
into the recess. |
Fig. 11 |
|
|
|
|
u Remove covers Fig. 10 (5,6,7). |
||
u Fit |
the equaliser |
trim |
Fig. 12 (20) centrally onto |
||
the |
appliance: slide |
into |
holding fixture and engage in keyholes.
5