Loading...
7664-4590-01
Punch Kit PK-1
for Di750
Operator’s Manual
This maunal explains the Punch Kit PK-1.
Refer to the Copier Operator’s Manual for use and functions of the Copier.
Contents |
|
|
1. |
Machine Configuration .......................................................... |
2 |
2. |
Requirements for Safe Use ................................................... |
5 |
3. |
Punching Mode ..................................................................... |
6 |
4. |
Help Mode ............................................................................. |
8 |
5. |
Finisher Adjustment [17] of Key Operator Mode ................. |
10 |
6. |
Empty Trash Basket of Punch Kit PK-1 .............................. |
12 |
7. |
Clearing Mishandled Paper ................................................. |
13 |
8. |
Specifications ...................................................................... |
14 |
1
1. Machine Configuration
External Machine
LCD touch screen |
Control panel |
EDH |
|
Work table |
|||
FN-104/FN-4 |
|
||
|
|
||
Finisher (option) |
|
Multi-sheet |
|
|
|
||
|
|
bypass tray |
Power switch |
|
|
Left side cover |
|
|
(not shown) |
|
|
Front door |
|
|
Left door |
|
|
Tray 1 |
|
|
Tray 2 |
Tray 3 |
|
|
|
|
Right side door (not shown) |
LCC left |
|
PK-1 Punch Kit |
|
|
|
side door |
|
FN-4 Finisher (option) 
Trimmer stacker cover
TMG-1 Trimming unit (option)
LCC left side door
LCC top door
Tray 4: Large
capacity cassette
C-305(option)
LCC top door
Tray 4: Large
capacity cassette
C-305L (option)
2
External Machine Call-outs
1EDH (Electronic Document Handler) automatically feeds multiple originals one at a time to the platen glass for copying.
2Work table provides a convenient workspace for documents both before and after copying.
3Multi-sheet bypass tray used for small quantity copying onto plain paper or special paper.
4LCC top door opens to allow loading paper.
5Tray 4: Large capacity cassette C-305/C-305L option holds 4,000 sheets.
6LCC left side door opens to allow removal of mishandled paper.
7Right side door opens to allow removal of mishandled paper.
8Tray 3 (universal tray) is user adjustable and holds 1,000 sheets of either 11"x17"/8.5"x14"/ 8.5"x11"R or 5.5"x8.5".
9Tray 2 (universal tray) is user adjustable and holds 500 sheets of either 11"x17"/8.5"x14"/ 8.5"x11"R or 5.5"x8.5".
10Tray 1 (universal tray) is user adjustable and holds 500 sheets of either 11"x17"/8.5"x14"/ 8.5"x11"R or 5.5"x8.5".
NOTE: Tray 1, 2, 3, and 4 are available for loading wide types of the regular sizes specified above.
11Left door opens together with the front door to allow removal of mishandled paper.
12Front door opens to the internal copier to allow clearing of mishandled paper and replenishing of toner.
13Left side cover opens to allow removal of mishandled paper.
14Power switch turns copier power On/Off when pressed.
15TMG-1 Trimming Unit (option) trims the end of booklet.
16Trimmer stacker cover opens to allow you to take out the finished sets.
17FN-104/FN-4 Finisher (option) sorts, staple-sorts, and groups into finished sets. FN-4 also folds or staples & folds copies into booklet-styled sets.
18PK-1 Punch Kit (option) punches file holes in the output copies.
19LCD touch screen displays interactive operation screens.
20Control panel controls copier operations.
3
Punch Kit Details
Punch Kit knob: can be turned to ease
removal of mishandled paper.
Left lever:
opens downward to allow removal of mishandled paper.
Upper lever:
opens upward to allow removal of mishandled paper.
Right lever:
opens upward to allow removal of mishandled paper.
Trash basket:
holds waste paper punched out.
Finisher/Punch Kit front door:
opens to remove mishandled paper in Finisher or Punch Kit, to change the staple cartridge and to remove paper punched out.
4
2. Requirements for Safe Use
Site Requirements
|
|
|
|
|
|
|
|
|
Unit: inches (mm) |
||
|
|
|
|
|
|
3.9 |
15.7 |
37.4 |
30.5 |
4.7 |
|
|
|
|
|
|
|
(950) |
(775) |
(120) |
|||
5.9 |
44.0 |
21.6 |
6.65 |
34.95 |
24.6 |
(100) |
(400) |
||||
|
|
||||||||||
(150) |
(1117) |
(550) |
(169) |
(887) |
(626) |
|
|
|
|
|
|
|
|
|
|
|
|
|
63.1 |
|
|
|
|
|
|
|
|
|
|
|
(1603) |
|
|
|
|
|
|
|
|
|
|
|
47.4 |
|
|
|
|
|
|
|
|
|
|
|
(1203) |
|
|
|
|
|
|
111.4 |
|
|
30.3 |
|
|
|
72.6 |
|
|
|
|
(2829) |
141.7 |
|
(770) |
|
|
|
(1845) |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
(3599) |
|
|
|
|
|
|
|
|
Di750 + FN-4 + PK-1 + TMG-1 + C-305L
NOTES:
1Dimensions are in inches with millimeters included in parentheses.
2The Finisher main tray of the FN-104/FN-4 Finisher gradually goes down while printed material is output.
DO NOT allow any object to interfere with the operation of the tray on the left side of the finisher, as any interference may cause damage to the finisher.
Finisher Capacity Requirements
Primary (Main) tray: Punching mode (machine with PK-1 only) 3,000 sheets (8.5"x11")
1,500 sheets (11"x17")
5
Loading...