Accessibility
Access
ABC DEF
JKLGHI MNO
TUVPQRS WXYZ
Interrupt
Reset
Copy
Fax/ScanExtra/Scan
Box
Mode Memory
Mode Check
Main Power
Stop
Power
Proof Copy
Star t
Utility/
Counter
Enlarge Display
Contrast
Short Guide 1/3
BASIC FUNCTIONS
MAKE A COPY
1. Position the original(s).
2. Type in the number of copies.
3. Press the START key.
HOW TO USE THE MACHINE
PANEL
Open
Accessibility
settings
Switch to
Enlarge
display
mode
Adjust contrast of
the touch screen
TOUCH SCREEN
Save copy
settings
Confirm your
access data
Check the
settings
Change the mode
CLEAR a
value
Change presettings of
the machine/
Check the machine’s counter
Proof a
copy set
Input a value or
a number
RESET the
settings
Interrupt a
copy job
POWER
ON/OFF
STOP a
process
START a
process
LOAD PAPER IN TRAY 1
REFILL
1. Pull out tray 1.
NOTE:
Do not touch the film located
at the right-hand end of the
tray.
2. Load the paper into tray 1
(not higher than ,).
3. Align the trailing-edge guide
with the paper.
CHANGE THE PAPER SELECTION (only for the bypass tray)
1. Open the bypass tray.
2. Load the paper onto the bypass tray (not higher than ,).
STOP A COPY PROCESS
1. Press the STOP key.
CLEAR A VALUE
1. Press the CLEAR key.
TOUCH SCREEN (Basic screen)
Open Job list screen
Manages Black and White
Message display
Save scanned data
in a registered User Box
Choose a FINISHING
function (Sort, group,
staple ...)
Number of copies
Change to the functions
of the tab
Choose function of
the BASICS tab
Indication of free
memory
Scan originals of different
sizes
3. Touch the desired paper selection.
4. Press the START key.
Short Guide 2/3
BASIC FUNCTIONS
ZOOM
1. Position the original(s).
2. Touch ZOOM in the basic screen.
3. Touch the desired function.
4. Press the START key.
Automatically
reduce/enlarge
original size to
paper size
DUPLEX
1. Position the original(s).
2. Touch SIMPLEX/DUPLEX in the basic screen.
3. Select the desired function.
Change zoom manually
Preset zoom values
*refer to User Manual for Copy Operations
APPLICATION FUNCTIONS
IMAGE REPEAT
1. Position the original.
2. Touch APPLICATION in the basic screen.
3. Touch IMAGE REPEAT.
Preset zoom values
by the user/Different
values for X and Y
(distortion)
Little bit smaller than
original size (value can
be changed*)
Keep original size
BASIC FUNCTIONS
DENSITY
1. Position the original(s).
2. Touch QUALITY/DENSITY in the basic
screen.
3. Touch the desired function.
4. Press the START key.
FINISHING FUNCTIONS
FINISHING (only with Finisher)
1. Position the original(s).
2. Touch FINISHING in the basic screen.
3. Touch the desired function.*
Select exposure level of
print image
CREATE A BOOKLET
1. Position the original(s).
2. Touch FINISHING in the basic screen.
3. Touch CREASE.
Select exposure level of the
background color of the colored
original
4. Touch OK.
5. Press the START key.
4. Touch AUTO DETECT or
Touch OvERSIZED PAPER to select the area to be scanned.
5. Touch ENTER until the basic screen is shown.
6. Touch PAPER in the basic screen.
7. Select the paper tray loaded with the paper.
8. Press the START key.
Manages Black and White
4. Touch ENTER.
5. Press the START key.
w/o Finisher with Finisher
4. Touch ENTER.
5. Press the START key.
*available functions depend on machine/finisher*available functions depend on machine/finisher
+