JVC AV-21BT80EP, AV-21BT8EEB, AV-21BT8EES, AV-21BT8ENB, AV-21BT8ENS User Manual

Contents
Safety Precautions ...................................................	1
Remote Control Buttons ..........................................	2
Control Panel Buttons..............................................	3
Antenna Connections ...............................................	3
Preparation ................................................................	4
Features ..........................................................................	4
Before Switching on your TV ..................................	4
Power connection.............................................................	4
Aerial Connections ...........................................................	4
How to connect the external equipments ..........................	4
Inserting batteries in the remote control handset ..............	4
Switching the TV ON/OFF ........................................	4
To switch the TV on ..........................................................	4
To switch the TV off ..........................................................	4
Initial Settings ...........................................................	4
Operating with the onset buttons ......................................	5
Operating with Remote Control .........................................	5
Menu System .............................................................	5
Sound Menu .....................................................................	5
Picture Menu ...................................................................	6
Feature Menu ...................................................................	7
Install. Menu ....................................................................	7
Program. (Programming) Menu ........................................	8
Other Features..........................................................	9
Sound Mute .....................................................................	9
Information on Screen ......................................................	9
To Display the Time ..........................................................	9
Standard ..........................................................................	9
VCR Control Buttons ........................................................	9
Teletext ......................................................................	9
To operate Teletext ...........................................................	9
To select a page of Teletext ..............................................	9
To Select Index Page ......................................................	10
Searching for a teletext page while watching TV ..............	10
To Select Double Height Text ..........................................	10
To Reveal “concealed” Information ...................................	10
To Stop Automatic Page Change .....................................	10
To Select a Subcode Page ..............................................	10
To exit Teletext ................................................................	10
Fastext and Toptext ........................................................	10
Connect the External Equipments ........................	11
Via the Euroconnector .....................................................	12
RGB mode ......................................................................	12
AV-2 S Mode ...................................................................	12
Via the RCA jacks ...........................................................	12
Via the ANT (aerial) socket ..............................................	12
TV and Video Recoder (VCR) ..........................................	12
NTSC Playback ..............................................................	12
Copy Facility ...................................................................	12
Connecting Headphones .................................................	12
Tips...........................................................................	12
Specifications..........................................................	13

Safety Precautions

1. Power Source

The receiver should be operated only from a 220-240V AC, 50 Hz. outlet. Ensure you select the correct voltage setting for your convenience.

2. Power Cord

The power supply cord should be placed so that they are not likely to be walked on or pinched by items placed upon them or against them. Pay particular attention to cord where they enter the plug, power outlet, and the point where they exit from the receiver.

3. Moisture and Water

Do not use this equipment in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this equipment to rain or water and do not place objects filled with liquids on it as this may be dangerous.

4. Cleaning

Before cleaning, unplug the receiver from the main supply outlet. Do not use liquid or aerosol cleaners. Use with soft and dry cloth.

5. Ventilation

The slots and openings on the receiver are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway.

6. Lightning

In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet.

7. Replacement Part

When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorized substitutions may result in fire, electrical shock, or other hazards.

8. Servicing

Please refer all servicing to qualified personnel. Do not remove cover as this may result in electric shock.

9. Flame sources

Do not place naked flame sources on the apparatus.

10. Stand-By

Do not leave your TV stand-by or operating condition when you leave your house.

Warning!

Any intervention contrary to regulations, in particular, any modification of high voltage or a replacement of the picture tube may lead to an increased concentration of x-rays. Any television modified in this way no longer complies with license and must not be operated.

Instructions for waste disposal:

Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children.

ENGLISH - 1 -

Remote Control Buttons

= Stand By / Power

0 - 9 = Direct Program

Standard Button (PICTURE default settings)

Colour Buttons

MENU = Menu Button

() = Cursor Up / Programme Up

() = Cursor Right / Volume +

Teletext Control Buttons

VCR Control Buttons

() = Cursor Down / Programme Down

() = Cursor Left / Volume -

AV = AV Button

= Information Button

= Mute

CAUTION

RISK OF ELECTRIC SHOCK

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock of persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

ENGLISH - 2 -

Control Panel Buttons

AV-21BT8ENB

AV-21BT8ENS

AV-21BF11ENS

Antenna Connections

ENGLISH - 3 -

Preparation

Place TV on a solid surface.

For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.

Features

•It is a remote controlled colour television.

•100 programmes from VHF, UHF bands or cable channels can be preset.

•It can tune cable channels.

•Controlling the TV is very easy by its menu driven system.

•It has two Euroconnector sockets for external devices (such as video recorder, video games, audio set, etc.)

•Front AV Input available.

•Stereo sound systems (Nicam + German) are available.

•Full function Teletext (Fastext, Toptext).

•It is possible to connect headphone.

•Direct channel access.

•APS (Automatic Programming System).

•All programmes can be named.

•Forward or backward automatic tuning.

•Sleep timer.

•Child Lock.

•Automatic sound mute when no transmission.

•5 minutes after the broadcasting (closedown), the TV switches itself automatically to stand-by mode.

Before Switching on your TV

Power connection

Important: The TV set is designed to operate on 220-240 V AC, 50 Hz.

•After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.

Aerial Connections

•Connect the aerial plug to the aerial input socket located at the back of the TV.

How to connect the external equipments

See “Connect the External Equipments” on page 11.

•See the instruction manuals provided with the external devices too.

Inserting batteries in the remote control handset

•Remove the battery cover located on the back of the handset by gently pulling upwards from the indicated part.

•Insert two AA (R6) or equivalent type batteries inside.

•Replace the battery cover.

NOTE: Remove batteries from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries.

Switching the TV ON/OFF

You can operate your TV either using the remote control handset or directly using the TV onset buttons.

To switch the TV on

Your TV will switch on in two steps:

1- Press the power button located on the front of the TV. Then the TV switches itself to standby mode and the RED LED located below the TV turns on.

2- To switch on the TV from stand-by mode either:

Press a digit button on the remote control so that a programme number is selected,

or,

Press Standby / Power Button or Programme Up and Down buttons on the front of the TV or on the remote control respectively, so the TV will switch on and the RED Led will turn

GREEN.

To switch the TV off

•Press the stand-by button on the remote control, so the TV will switch to stand-by mode and the GREEN LED will be-

come RED, or,

• Press the power button located on the front of the TV.

Initial Settings

The message "PLEASE CHECK ANTENNA CABLE AUTO. PROGRAMMING SYSTEM" will be displayed when you turn on your TV for the first time.

1- Select LANGUAGE with the “	“ or “ ” button, then
press the “ ” or “ ” button to select a menu language.
2- Select COUNTRY with the “	“ or “ ” button, then

press the “” or “” button to select the country you are now located.

3- Select START with the “	“ or “	” button, then press
the “ ” button to start APS.

APS (Automatic Programming System) automatically programmes the received channels in your TV’s programme numbers. During APS, "A. P. S. IS RUNNING" will be displayed. After APS is finalized, the “PROGRAM.” menu appears.

To cancel APS, press the “” button.

You can delete a channel, insert a channel into a programme number, or re-start APS with the “PROGRAM.” menu.

For details, see “Program. (Programming) Menu” on page 8.

4- Press the "STANDARD" button to complete the initial settings.

After the initial settings are complete, you can change a programme number or to name a programme number or to programme new channel manually. For details, see “Install. Menu” on page 7.

If the message "PLEASE CHECK ANTENNA CABLE AUTO. PROGRAMMING SYSTEM" does not appear, follow the description “Program. (Programming) Menu” on page 8 to select a menu language and the country where you are now located, and to use A.P.S..

ENGLISH - 4 -

Programme Selecting (Previous or next

programme):

• Press “

” button to select the previous programme.

• Press “

“ button to select the next programme.

Programme Selecting (direct access):

Press digit buttons on the remote control handset to select

programmes between 0 and 9. TV will switch to the selected

program after a short delay.

When you press first digit, second digit will be displayed with

‘-’ symbol for 3 seconds. To select programmes between 10

and 99 press corresponding digit buttons consecutively be-

fore ‘-’ symbol on the second digit disappears. (e.g. for pro-

gramme 27, first press 2 and then 7 while program number

displayed as ‘2-’ )

Operating with the onset buttons

Menu System

Your TV has been designed with a menu system. Display

Volume setting and programme selection can be made using

“MENU” (main menu) and enter one of five menus (SOUND,

the buttons on the front panel.

PICTURE, FEATURE, INSTALL. and PROGRAM.).

Volume Setting:

1- Press “MENU” button to display “MENU” (main menu).

• Press “-VOL.” / “-

” button to decrease volume or

The menu titles will be displayed in the main menu.

“VOL.+” / “ +” button to increase volume, so a volume

2- Press “

“ or “

” button to select a menu title, then

level scale will be displayed on the screen.

press “

” or “ ” button to enter the menu.

Programme Selecting:

• To exit a menu, press “STANDARD” button.

• Press “PROG.+” / “P ” button to select next programme or

• To go to the previous menu, press “MENU” button.

Sound Menu

“-PROG.” / “ P” button to select the previous programme.

Entering Main Menu:

To change sound settings:

• Press “MENU” button to enter main menu. In the main

• Press “MENU” button, now you are in main menu. In the

menu select submenu using “PROG.+” / “P ” or “-PROG.” /

main menu, select SOUND using “

“ or “

” button,

“ P” button and enter the submenu using “VOL.+” / “ +”

then enter the sound menu pressing “ ” or “ ” button.

or “-VOL.” / “-

” button. To learn the usage of the menus,

or,

refer to “Menu System” on page 5.

• Enter the Sound Menu directly, pressing the RED button.

Operating with Remote Control

Setting Volume:

The remote control handset of your TV is designed to control

As you enter the sound menu, Volume will be the first select-

all the functions of the model you selected. The functions will

ed option.

be described

in accordance with the menu system of your

TV.

• Press “ ” button to increase volume.

Functions which you can use out of menu system are de-

• Press “ ” button to decrease volume.

scribed below.

Volume Setting:

Press “” button to increase volume.

Press “” button to decrease volume.

Setting Balance:

• Using ““ or “” button select Balance.

• Press “” button to change balance rightward.

• Press “” button to change balance leftward.

ENGLISH - 5 -

Setting Bass Level:

•Using ““ or “” button select Bass.

•Press “” button to increase bass level.

•Press “” button to decrease bass level.

Setting Treble Level:

•Using ““ or “” button select Treble.

•Press “” button to increase treble level.

•Press “” button to decrease treble level.

Selecting Mode:

You can choose MONO, STEREO or DUAL I-II mode, only if the selected channel supports that mode.

•Using ““ or “” button select Mode.

•Press “” or “” button to change Mode.

•If the TV channel you are watching broadcasts in two languages (e.g. Eurosport), you can select the dubbed or the original language.

•When the stereo broadcast is received poorly, you can change from stereo to mono sound so that you can hear the broadcast more clearly and easily.

Setting Effect:

You can use this feature to switch on and off sound effect. Pressing “” or “” button will turn on and off this feature. If the current sound system is mono and the sound effect is set ON, then the sound will be heard as if it is stereo. If the current sound system is stereo, switching this effect on will make the sound deeper. Switching it off will make no change in mono and stereo.

Picture Menu

To change picture settings:

• Press “MENU” button, now you are in main menu. In the main menu, select PICTURE using ““ or “” button, then enter the picture menu pressing “” or “” button.

or,

• Enter the Picture Menu directly, pressing the GREEN button.

Setting Brightness:

•As you enter the picture menu, BRIGHTNESS will be the first selected option.

•Press “” button to increase BRIGHTNESS.

•Press “” button to decrease BRIGHTNESS.

Setting Contrast:

•Using ““ or “” button select CONTRAST.

•Press “” button to increase CONTRAST level.

•Press “” button to decrease CONTRAST level.

Setting Colour:

•Using ““ or “” button select COLOUR.

•Press “” button to increase COLOUR level.

•Press “” button to decrease COLOUR level.

Setting Sharpness:

•Using ““ or “” button select SHARPNESS.

•Press “” button to increase SHARPNESS level.

•Press “” button to decrease SHARPNESS level.

ENGLISH - 6 -

	Setting Hue (In AV mode only) :								During the last minute of the count down, the timer is dis-
	• Using “		“ or “	” button select HUE.					played on the upper right of the screen. When the timer
									reaches zero, TV goes to stand-by.
	• Press “ ” button to increase HUE level.								Child Lock:
	• Press “		” button to decrease HUE level.
									In Feature Menu, press “	“ or “	” button to select
	HUE adjust is functional only when NTSC 3.58/4.43 is ap-
									CHILD LOCK. Using “ ” or “ ” button turn CHILD LOCK On
	plied in AV mode. It does not appear when other colour sys-
									or Off.
	tems used.
									When Off is selected, there will be no difference in the opera-
									tion of your TV. When On is selected, the TV can only be
									controlled by the remote control handset. In this case, the
									front panel buttons (except the Switch On/Off button) will not
									work.

Mode:

This option is used to change the picture size according to the coming transmission.

• If AUTO function is selected, then the picture size will be	Language:
automatically changed according to the transmission.	Menu Language can be selected by pressing “ ” or “ ” button
• Selecting 4 : 3 mode forces picture ratio size to 4 : 3.	on LANGUAGE item.
• Selecting 16 : 9 mode forces picture ratio size to 16 : 9.
Every program has its own picture mode setting. When you
store the picture mode for a program other programs keep
their picture mode setting unaffected.

					AV-2 Output:
					You can use this feature to select the internal or external
					source that will be output at AV-2 (SCART 2) terminal.
					TV or AV-1 can be chosen by pressing “ ” or “ ” button on
Feature Menu					"AV-2 OUTPUT".
• Press “MENU” button, now you are in main menu. In the
main menu, select FEATURE, using “		“ or “	” button.
Then enter the feature menu pressing “ ” or “ ” button.
or,

	• Enter the Feature Menu directly, pressing the YELLOW
	button.	Install. Menu
	Sleep Timer:
		• Press “MENU” button, now you are in main menu. In the
	• As you enter the feature menu, SLEEP TIMER will be the
		main menu, select INSTALL. using “	“ or “	” button,
	first selected option.	then enter the Installation menu pressing “ ” or “ ” button.
	• Use “ ” or “ ” button to change the value of the sleep timer	or
	between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, 1:15:00,	• Enter the Installation Menu directly, pressing the BLUE but-
	1:30:00, 1:45:00 and 2:00:00. hours. Your TV will get into
		ton.
	standby mode when the period you selected passes after
	you make the selection.

It is displayed on the upper right of the screen. If sleep timer is activated it is displayed with the TV status and erased with it after 3 seconds.

ENGLISH - 7 -

To programme a channel in a TV’s programme

Program. (Programming) Menu

number manually:

PROGRAM. (Programming) menu is used to display the

1. PROGRAMME will be the first selected item as you enter

programme names and numbers. You can use this menu to

the INSTALL. menu. Pressing “ ” or “ ” button select the

delete a channel, to insert a channel and to autostore the

programme number where you want to the tuned channel

programmes.

to be stored. (You may also type the programme number

Select the PROGRAM. menu pressing “

“ or “

” but-

using the digit buttons.)

ton and open it pressing “ ” or “ ” button. When you enter the

programme menu, all the programme numbers and names

will be displayed on the screen. The programme number and

name of the tuned channel will be shown by the cyan color.

All the other channel numbers will be white. You can move

the number in cyan using “

“ or “

” or “ ” or “

” button.

Also, it's possible to use digit buttons to select programme

numbers. As you pass through the programme numbers this

way, to reach the programme number you want, the channels

2. Press “

“ or “

” button to select BAND. Using “ ” or

corresponding to the programme numbers you pass through

will be tuned and the selected programme number will be

“ ” button to select the band in which you want to search a

shown in cyan.

channel.

3. Press “

“ or “

”button to select SEARCH. Press “ ”

or “ ” button to start searching. (Press “ ” button to search

forward.Press “ ” button to search backwards.)

If the found channel is not the desired one, press “ ” or “ ”

button to start searching again.

To stop searching before a channel is found, press the re-

verse direction button. For example, when the TV is search-

ing forward with “ ” button, press “ ” button to stop searching.

If you know the channel number which you want to find, you

can find the channel directly.

To change the name of a programme:

Press “

“ or “

” button to select CHANNEL, then press

“ ” or “ ” button to select the channel number, or enter the

• Move to the channel you want to rename or use the digits

number with the digit buttons.

so that the selected programme number is in cyan color.

4. If you want to name the new programme, follow the instruc-

• Press the RED button. Use “ ” or “ ” button to select the

tions under "To change the name of a programme" on

position and press “

“ or “

” button to select a letter.

page 8.

Now, press the RED button again to store or BLUE button to

5. If the channel reception is poor, fine-tune the channel.

cancel NAME.

Press “

“ or “

” button to select FINE TUNING,then

To delete a channel from a programme number:

press “

” or “ ” to fine-tune the channel.

6. After the all settings are completed, store the new

• Move to the channel you want to delete or use the digits so

channel’s setting to the programme number which you se-

that the selected programme number is in cyan color.

lected. Press “

“ or “

” button to select STORE,

• Press the YELLOW button. Now the corresponding channel

then press “ ” or “

” to store it.

will be deleted and all the other channels below this pro-

If you want to modify the current programme number’s

gramme number will be moved one programme number up.

setting (for example, changing fine tuning, etc.) :

Now, press the YELLOW button again to delete or BLUE but-

1. Select the programme number you want to modify the

ton to cancel DELETE.

settings while no menu appears.

To insert a channel into a programme number:

2. Display the INSTALL. menu.

• Move to the channel to be inserted or use the digits so that

3. Follow “To programme a channel in a TV’s program-

the selected programme number is in cyan color.

me number manually:” on page 8 and change the set-

• Press the GREEN button. Now using “

“ or “

” or “ ”

tings of the current programme number.

or “ ” buttons, move to the programme number.

If you want to name the new programme, follow the in-

Now, press the GREEN button again to insert or BLUE button

structions under "To change the name of a programme"

to cancel INSERT.

on page 8.

Note:

A.P.S.

Do not use Programme item in the INSTALL. menu to select

If you enter the A.P.S. menu, you can automatically program-

the programme number. If you select the programme number

me the received channels in your TV’s programmes with

with Programme item and store the settings, the selected

A.P.S. ( Automatic programme system ).

programme number’s current settings are cancelled.

1. After displaying the PROGRAM. menu, press the BLUE

button to enter the A.P.S. menu.

2. Select LANGUAGE with the “

“ or “

” button, then

press the “ ” or “ ” button to select a menu language.

ENGLISH - 8 -

3.Select COUNTRY with the ““ or “” button, then press the “” or “” button to select the country you are now located.

4.If you want to start programming, select START with the

““ or “” button, then press the “” button. The message “A.P.S. IS RUNNING” appears and A.P.S. automatically programmes the received channels in your TV’s programme numbers. Afrer A.P.S. is finalized, the PROGRAM. menu appears again.

To cancel A.P.S., press the “” button.

Other Features

Sound Mute

To cut off the sound of the TV, press “” button. The sound

will be cut off. To cancel mute, press “” or “” or “” button. The volume level will be the same as the level before mute when you cancel mute.

Information on Screen

First pressing the “” button displays the current status “Programme number”, “Station name” and “Sound status”.

Pressing this button again displays the current time.

Pressing this button once more remove the on-screen display.

To Display the Time

•While watching a TV programme with Teletext transmission

press ““ button twice. The current time information, captured from Teletext will be displayed on the screen.

•If the programme being watched does not have Teletext transmission, only a box will be displayed at the same location.

•The time information will disappear after pressing ““ button again.

When time information is displayed on screen, entering another menu will remove it.

Standard

You can re-set the current PICTURE menu settings (except Picture Mode setting) to the default settings.

• Press “STANDARD” button when no menu appears.

VCR Control Buttons

The buttons can be used to operate a JVC brand VCR. Pressing the button having the same appearance as the original remote control button of a device makes the function work in the same way as the original remote control.

Press the VCR Control Button to control your VCR.

Note:

•If your device is not made by JVC, these buttons cannot be used.

•Even if your device is made by JVC, some of these buttons or any one of the buttons may not work, depending on the device.

•You can use the / buttons to choose a TV channel which the VCR will receive.

Teletext

Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index).

No on screen display will be available in text mode.

No contrast, brightness or colour control, but volume control is available in text mode.

To operate Teletext

•Select a TV station on which Teletext is being transmitted.

•Press (TELETEXT) “” button. Usually the list of contents (index) is displayed on the screen.

To select a page of Teletext

•Press the appropriate digit buttons for the required Teletext page number.

The selected page number is displayed at the top left corner of the screen. The Teletext page counter searches until the selected page number is located, so that the desired page is displayed on the screen.

•Press ““ button to move the Teletext screen forward one page at a time.

•Press “” button to move the Teletext screen backward one page at a time.

ENGLISH - 9 -

To Select Index Page

• To select the page number of the index (generally page 100), press ““ button.

Searching for a teletext page while watching TV

• In the Teletext mode pressing ““ button will switch the screen to the TV mode. In the TV mode enter a page number using digit keys. As you enter last digit of page number, “” sign will replace the page number and flash until the entered page number is found. Then the page number will replace “” sign again. Now you can display this teletext page pressing ““ button.

To Select Double Height Text

•Press ““ button for the top half of the information page to be displayed in double height text.

•Press ““ button again for the bottom half of the information page to be displayed in double height text.

•Press ““ button once more for the full page of normal height text.

To Reveal “concealed” Information

•Pressing ““ button once will reveal answers on a quiz or games page.

•Pressing ““ button again will conceal the revealed answers.

To Stop Automatic Page Change

The teletext page you have selected may contain more information than what is on the screen; the rest of the information will be displayed after a period of time.

•Press ““ button to stop the automatic page change.

•Press ““ button again to allow the next page to be displayed.

To Select a Subcode Page

Subcode pages are subsections of long Teletext pages that can only be displayed on the screen one section at a time.

•Select the required Teletext page.

•Press ““ button.

•Select the required subcode page number by pressing four digit buttons (e.g. 0001).

•If the selected subcode page is not displayed in a short

time, press ““ button. TV programme will be displayed on the screen.

•Teletext page number will be displayed on the upper left corner of the screen when the selected page is found.

•Press ““ button to display the selected Teletext page.

To exit Teletext

• Press “” button. The screen will switch to TV mode.

Fastext and Toptext

Teletext mode will be selected according to transmission automatically.

Your TV supports the 7 page Teletext system. When the page number of any of the 7 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically.

•Press ““ button to move the Teletext screen forward one page at a time.

•Press “” button to move the Teletext screen backward one page at a time.

For Fastext and Toptext:

The subject-heading for the information may have a particular colour or can be in a form located in a coloured box.

•Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly.

For Toptext:

If Toptext transmission is present, colour coded buttons will appear in status row.

If Toptext transmission is not present, status row will not appear.

In Toptext mode the ““ or “” commands will request the next or previous page respectively. If Toptext transmission is not available, in case of operation of these commands, wraparound occurs. For example page 100 appears to be one greater than page 199.

ENGLISH - 10 -

Connect the External Equipments

Before connecting anything

•Switch off all equipments including the TV.

•Read the manuals provided with the equipments.

To select an AV mode

Pressing “AV” button on the remote control selects one of four AV modes (AV- 1, AV-2, AV-2 S and F-AV).

•To return to the TV mode, repeatedly press “AV” button or press ““ or “” button. AV-1 (SCART 1) terminal: Euroconnector (21-pin, SCART)

•Video input, Audio L/R inputs and RGB inputs are available.

•TV broadcast outputs (Video and Audio L/R) are available.

AV-2 (SCART 2) terminal: Euroconnector (21-pin, SCART)

•Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

•Video and Audio L/R outputs are available.

F-AV (Front AV) terminal: RCA connectors x 3

• Video input and Audio L/R inputs are available.

FRONT AV

ENGLISH - 11 -

Via the Euroconnector

Your TV set has two Euroconnector sockets. If you want to connect equipments (e.g. video recorder, decoder, etc.) which have Euroconnectors, to your TV, use the AV-1 (SCART 1) or

AV-2 (SCART 2) terminals.

If an external device is connected via Euroconnector sockets TV is switched to AV mode automatically.

RGB mode

If an equipment can output the RGB signals, connect it to the

AV-1 (SCART 1) terminal.

AV-2 S Mode

If the equipment connected to your TV set supports S-Video (Y/C) output from Euroconnector, you can have a better picture quality by selecting AV-2 S mode and connecting your equipment to the AV-2 S (SCART 2) terminal of TV. See your equipment's booklet to check if your equipment has such feature.

Via the RCA jacks

If you have an equipment (such as a Camcorder) which has the RCA jacks, connect it to the F-AV (Front AV) terminal with the video and audio cables.

•If the epuipment has the mono audio jack, connect it to the

AUDIO-L jack.

Via the ANT (aerial) socket

If your equipment does not have an Euroconnector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment.

•To store the test signal that comes from the equipment, see "Install. Menu" on page 7 and store it to the programme number 0. You can watch images from that equipment to select the programme number which you stored the test signal.

TV and Video Recoder (VCR)

•Connect the Video Recorder to the ANT (antenna input) socket of the TV with the aerial cable.

•Connect the Video Recorder to the AV-1 or AV-2 terminal with the SCART cable, or connect it to the F-AV (Front AV)

terminal with the audio and video cables.

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press “AV“ button to select the corresponding AV mode.

NTSC 3.58/4.43 system is detected automatically in AV mode.

Copy Facility

You can output the video and audio signals which inputs from TV or AV-1 (SCART 1) terminal to the video recorder connected to the AV-2 (SCART 2) terminal.

• To select the output source, see “AV-2 OUTPUT” on page 7.

Connecting Headphones

Use the stereo headphone socket of your TV, to connect headphones.

Tips

Care of the Screen

Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.

Poor Picture

Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, nonearthed audio equipment or neon lights, etc. ?

Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial.

The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals.

No Picture

Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer.

No Picture means that your TV is not receiving any transmission. Have you pressed the correct keys on the remote control? Try once more.

Sound

Sound is coming from only one of the speakers. Is the balance set to one direction extreme? See SOUND menu.

Remote Control

Your TV no longer responds to the remote control. Press the “STANDARD” button on the remote control once more. Perhaps the batteries are exhausted. If so you can still use the local buttons at the front of your TV.

Have you selected the wrong menu? Press “STANDARD” button to return to TV mode or press “MENU” button to return to the previous menu.

No solution

Switch your TV set off and on. If this does not work, call the service personnel; never attempt to repair it yourself.

ENGLISH - 12 -

Specifications

TV BROADCASTING ..........................................		PAL B/G
RECEIVING CHANNELS .....................................		VHF (BAND I/III)
		UHF (BAND U)
		HYPERBAND
		CABLE TV (S01-S41 / S75-S79)
NUMBER OF PRESET CHANNELS ...................	100
CHANNEL INDICATOR ........................................		On Screen Display
RF AERIAL INPUT ..............................................		75 Ohm (unbalanced)
OPERATING VOLTAGE ......................................		220-240V AC, 50 Hz.
SOUND-MULTIPLEX SYSTEMS ..........................		Nicam + German Stereo
PICTURE TUBE ..................................................		For 21”
AUDIO OUTPUT POWER
(WRMS.) (%10 THD) ..................................		2 x 6,5
POWER CONSUMPTION (W) (max.) ..................	85
DIMENSIONS (mm) ...................................	AV-21BT8ENB
	AV-21BT8ENS		AV-21BF11ENS
D .........................................................................	490		476
L .........................................................................	596		600
H .........................................................................	446		448
Weight (Kg.) ........................................................	21,4		22,2

ENGLISH - 13 -