COLOUR TELEVISION
INSTRUCTIONS
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
AV-16N73
AV-21D73
Contents |
|
Safety precautions |
2 |
Preparation |
2 |
1 Inserting the batteries ................................... |
2 |
2 Connecting the aerial and external devices ... |
3 |
3 Connecting the power cord ........................ |
5 |
4 SETUP TOUR .............................................. |
5 |
Basic operation |
6 |
Remote control buttons and functions |
7 |
ECO SENSOR button ..................................... |
7 |
PICTURE MODE button ................................. |
7 |
COLOUR SYSTEM button ............................. |
7 |
SOUND SYSTEM button ............................... |
7 |
DISPLAY button ............................................. |
8 |
MUTING button ............................................. |
8 |
OFF TIMER button ......................................... |
8 |
PICTURE BOOSTER button ........................... |
8 |
RETURN + button .......................................... |
9 |
CHANNEL SCAN button ................................ |
9 |
Using the TV’s menus |
10 |
Basic operation ............................................ |
10 |
ON TIMER ..................................................... |
11 |
INPUT ........................................................... |
11 |
AUTO SHUTOFF .......................................... |
12 |
CHILD LOCK ................................................. |
12 |
BLUE BACK .................................................. |
12 |
Picture Adjustments .................................... |
12 |
AI ECO DISPLAY .......................................... |
13 |
SETUP TOUR ............................................... |
13 |
AUTO CH PRESET ....................................... |
13 |
MANUAL CH PRESET .................................. |
14 |
SKIP .............................................................. |
15 |
LANGUAGE .................................................. |
15 |
Using the buttons on the TV |
16 |
Troubleshooting |
18 |
Specifications |
19 |
LCT1210-001A |
© 2002 VICTOR COMPANY OF JAPAN, LIMITED |
0702-NV-VT |
WARNING
• To prevent fire or shock hazard, do not expose the TV to rain or moisture.
CAUTION
•Operate only from the power source indicated on the rear of the TV.
•Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord.
•Never block or cover the cabinet openings for ventilation. Never install the TV where good ventilation is unattainable. When installing
this TV, leave spaces for ventilation around the TV more than the minimum distances shown in the diagram.
•Do not allow objects or liquid into the cabinet openings.
•In the event of a fault, unplug the TV and bring to JVC service centre. Do not attempt to repair it by yourself or remove the rear cover.
•The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.
•When you don’t use this TV for a long period of time, be sure to unplug it.
Preparation
1 Inserting the batteries
Correctly insert two batteries, observing the , and
. polarities and inserting the . end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit new batteries.
The supplied batteries are for testing, not regular use.
2
Preparation
2Connecting the aerial and external devices
•For further details, refer to the manuals provided with the devices you are connecting.
•Connecting cables are not supplied.
•The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack is output through both. You cannot provide input to both the front and rear jacks at the same time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or recording).
■ Connecting the aerial and VCR
Connecting the aerial
To install rod aerial:
Install into the top-rear aerial holder. Once installed, it cannot be removed.
VHF/UHF outdoor aerial |
Indoor aerial |
1
2
|
Rod aerial |
Matching aerial adapter |
Aerial holder |
(supplied) |
|
VIDEO AUDIO
IN
OUT
• Illustration of AV-21D73.
Connecting the aerial and VCR
VHF/UHF outdoor aerial
2
|
|
VIDEO AUDIO |
|
|
IN |
|
|
OUT |
|
|
3 |
To RF |
To video |
To audio |
output |
output |
output |
1To aerial input
VCR
• Illustration of AV-21D73.
3
Preparation
■ To set up matching aerial adapter
(1) |
(2) |
(3) |
or
■ Connecting other external devices
VIDEO AUDIO
IN
OUT
To audio |
To video |
output |
output |
VCR (for playing)
VCR (for recording)
To audio |
To video |
input |
input |
• Illustration of AV-21D73.
To video
output Camcorder
or
TV game
To audio
output
MENU
VIDEO AUDIO
IN
Headphones
• Illustration of AV-21D73.
•Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off.
•Because the front AUDIO jacks are monaural, even stereo input becomes monaural.
4
Preparation
3 Connecting the power cord
Connect the power cord to the AC outlet.
Operate only from the power source indicated on the rear of the TV.
4 SETUP TOUR
When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.
•In case of resetting that the reason for such as removal, you can set the SETUP TOUR function on the “MENU 3” menu. For details, see page 13.
1Press the Main power button on the TV.
The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting mode.
SETUP TOUR
SETUP TOUR
LANGUAGE
ENGLISH
NEXT
|
EXIT BY |
OPERATE BY -+ |
DISPLAY |
|
ON |
POWER |
|
|
|
TIMER |
|
||
POWER lamp |
Main power button |
|||
CHANNEL |
RETURN+ |
0 -/-- |
||
SCAN |
||||
DISPLAY |
|
|
MUTING |
|
DISPLAY |
|
|
|
|
button |
|
|
MENU / |
|
MENU –/+ |
MENU |
|||
buttons |
||||
|
|
|||
buttons |
|
|
|
|
CHANNEL |
VOLUME |
2Press the MENU Mbuttons to select the on-screen language.
3Press the MENU ybutton.
The AUTO PROGRAMMING function will start and the indicator blinks.
SETUP TOUR
NOW PROGRAMMING
STOP BY -+
• To stop the AUTO PROGRAMMING function, press the MENU mbuttons.
When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO PROGRAMMING function operation is completed.
•If a TV channel you want to view is not set to the channel, set it with the MANUAL CH PRESET function. For details, see page 14.
5
ECO |
PICTURE |
POWER |
|
SENSOR |
BOOSTER |
|
|
SYSTEM |
|
PICTURE |
|
COLOUR |
SOUND |
|
MODE |
TV/VIDEO |
1 |
2 |
3 |
|
4 |
5 |
6 |
OFF |
7 |
8 |
9 |
TIMER |
|||
CHANNEL |
RETURN+ |
0 |
-/-- |
SCAN |
|||
DISPLAY |
|
MUTING |
|
|
MENU |
|
|
CHANNEL |
VOLUME |
||
|
REMOTE CONTROL UNIT |
||
|
RM-C367GY |
|
|
1Press the POWER button to turn your TV on.
•If your TV does not turn on, press the Main power button on the TV then press the POWER button again.
•You can also turn on your TV by pressing any of the following buttons;
-the CHANNEL mbutton
-the Number buttons
-the TV/VIDEO button
2 Select a channel.
■Press the CHANNEL mbutton.
•Up/down selection cannot be selected for channels to which the SKIP has been set to “YES”. See page 15.
■Press the Number buttons to enter the channel number.
•If you want to enter a two-digit number, press the -/-- button to select the two digit mode “--”, then enter the channel number.
3Press the VOLUME Mbutton to adjust the sound.
4To turn your TV off, press the POWER button.
•We recommend that you press the Main power button on the TV to turn the main power off if you do not plan to use your TV for a long time or if you wish to save energy.
If the picture is not clear:
Press the COLOUR SYSTEM button to select another colour system, see page 7.
If the sound is not clear:
Press the SOUND SYSTEM button to select another sound system, see page 7.
Viewing Images from an External Device:
Press the TV/VIDEO button to select the VIDEO mode.
•You can also use the INPUT function to select the VIDEO mode. For details, refer to page 11.
6