COLOR TELEVISION
AV-14FN15
AV-20NN15
Contents |
|
Knowing your TV’s features .......................... |
2 |
Remote control buttons and basic functions . 3 |
|
TV buttons and functions .............................. |
5 |
Setting up your TV ........................................ |
6 |
Basic setting for picture ................................. |
8 |
Advanced setting for picture ......................... |
9 |
Original features for picture ........................... |
9 |
Advanced setting for sound .......................... |
9 |
Favorite channel and video setting ............. |
10 |
Customized setting ..................................... |
11 |
TV channel presetting ................................. |
12 |
Additional preparation ................................. |
13 |
Troubleshooting .......................................... |
13 |
Specifications .............................................. |
14 |
INSTRUCTIONS
GGT0079-001A-H
Thank you for buying this JVC color television.
To make sure you understand how to use your new TV, please read this manual throughly before you begin.
Safety Instructions
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV.
1Operate only from the power source indicated on the rear of the TV.
2Avoid damaging the power cord and AC plug. When unplugging the TV, grasp the AC plug.
Do not pull on the power cord.
3Never block or cover the cabinet ventilation openings. Never install the TV where good ventilation is unattainable. When installing this TV, leave space for ventilation around the TV more than the minimum distances as shown in the diagram.
4Do not allow objects or liquid into the cabinet openings.
|
|
15 cm |
10 cm |
10 cm |
15 cm |
5In the event of a fault, unplug the unit and call a JVC service technician. Do not attempt to repair it yourself or remove the rear cover.
6The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.
7If you are not going to use this TV for a long period of time, be sure to disconnect the AC plug from the AC socket.
8The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Knowing your TV’s functions
Main features
Function |
Description |
|
|
Closed caption |
You can display dialog on the screen from TV broadcasts with Closed caption |
|
system. You also may be able to display some information in text form if available. |
Favorite CH (Channel) |
You can register up to four favorite channels for quick recall with one press. |
AI Volume |
TV adjusts automatically the volume to the same level for all TV channels to |
|
avoid sudden change of the volume when selecting different TV channel. |
VNR |
You can reduce the picture noise when viewing noisy TV programs or video |
|
sources. |
White balance |
You can choose one of three tones of white to match to the video source such |
|
as movie, sports, etc. Changing White balance affects the appearance of all other |
|
colors on the screen. |
Child lock |
To prevent accidental operation by your children, you can disable the control |
|
buttons on the TV. |
2
Remote control buttons and basic functions
1
6
90
-2
83
7 45
|
|
RM-C1265 |
|
|
|
No.Press |
To |
|
1 |
POWER |
Turn on or off the TV from standby mode. |
2 |
MENU/OK |
Display menu and confirm selected function. |
3 |
5/∞/2/3 |
Select and adjust menu function. |
4 |
CHANNEL M |
Select the desired channel number. |
5 |
VOLUME M |
Adjust the volume level. |
6 |
TV/VIDEO |
Select TV or VIDEO terminal input. |
7 |
MUTING |
Turn off the volume. Press this button again to resume the volume. |
8 |
DISPLAY/BACK |
Display the program number or video terminal number on the screen. |
|
|
On the other hand, you can use this button to return to the previous menu. |
9 |
CLOSED CAPTION |
Display information in text which are broadcasted by some TV channels. |
0 |
0-9, 100+ |
Select the program number. For three-digit program numbers, press 100+, |
|
|
then press the number button. |
- |
RETURN, |
a) Return to the frequently viewed channels with one touch. |
1 Choose the channel you want to register.
2 Press and hold RETURN, button until “RETURN PLUS PROGRAMMED!” appears.
To cancel, press and hold RETURN, button until “RETURN PLUS CANCELED!” appears.
b)Return to the previously viewed channel, if you have not set or have canceled the Return channel as above.
3
Remote control buttons and basic functions
How to operate menus and menu locations
TO |
Operation |
Note |
Display the MENU. |
Press the MENU/OK button 2. |
To exit the MENU, press the |
|
|
DISPLAY/BACK button* 8 or |
|
|
choose EXIT menu. |
Display the top menu. |
Press 5/∞ buttons 3 to choose a menu title. |
Press ∞ button 3 to display the |
|
Then press MENU/OK button 2. |
next page for more functions. |
Display the 2nd menu. |
Press 5/∞ buttons 3 to choose a menu title. |
|
|
Then press MENU/OK button 2. |
|
Display the 3rd menu. |
Press 5/∞ buttons 3 to choose a menu title. |
|
|
Then press MENU/OK button 2. |
|
Return to the previous |
Press the DISPLAY/BACK button* 8. |
– |
menu. |
|
|
Choose the setting of |
Press 5/∞ buttons 3 to choose a function. |
Press the MENU/OK button 2 to |
a function. |
Then press the 2/3 buttons 3 to change the |
exit from the menu. |
|
setting. |
|
Adjust the effect level |
Press 5/∞ buttons 3 to choose a function. |
|
of a function. |
Then press the 2/3 buttons 3 to adjust the |
|
|
effect level. |
|
Display the sub menu |
Press 5/∞ buttons 3 to choose a function. |
|
of a function. |
Then press MENU/OK button 2 to display |
– |
|
the sub menu. |
|
The following chart shows locations of functions in menus. In this manual, location of a function is described as follows:
MENU Top menu 2nd menu
MENU Top menu 2nd menu 3rd menu
Note: Some functions have the 4th menus as the sub-menus.
*To exit the menu, the on screen display will show BACK indicated in blue. But it doesn’t refer to the blue button on the remote control. Instead, it refers to the DISPLAY/BACK button on the remote control.
|
Top menu |
2nd menu |
Location |
3rd menu |
Location |
MENU |
INPUT |
EXT. INPUT |
P.11 |
- |
- |
|
|
DISPLAY |
P.11 |
- |
- |
|
|
CLOSED CAPTION |
P.9 |
- |
- |
|
PICTURE |
PICTURE MODE |
P.8 |
- |
- |
|
* If you want to |
PICTURE SETTING |
P.8 |
- |
- |
|
adjust |
||||
|
WHITE BALANCE |
P.8 |
- |
- |
|
|
PICTURE |
||||
|
SETTING |
PICTURE FEATURES |
- |
VNR |
P.11 |
|
menu, you must |
|
|
|
|
|
|
|
FAVORITE CH SETTING |
P.10 |
|
|
set PICTURE |
|
|
||
|
|
|
VIDEO SETTING |
P.10 |
|
|
MODE menu to |
|
|
||
|
USER. |
|
|
COLOR SYSTEM |
P.8 |
|
|
|
|
||
|
SOUND |
AI VOLUME |
P.9 |
- |
- |
|
FEATURES |
OFF TIMER |
P.11 |
- |
- |
|
|
CHILD LOCK |
P.11 |
- |
- |
|
INSTALL |
AUTO PROGRAM |
P.12 |
- |
- |
|
|
CHANNEL SUMMARY |
P.12 |
- |
- |
|
|
BLUE BACK |
P.9 |
- |
- |
|
|
AUTO SHUTOFF |
P.11 |
- |
- |
|
EXIT |
- |
- |
- |
- |
4
TV buttons and functions
The following illustrations are for AV-14FN15 and AV-20NN15 only, which are used for explanation purposes. Your TV may not look exactly like the illustration.
Front of the TV |
|
|
|
|
|
|
|
|
|
|
|
9 |
8 |
7 |
6 |
5 |
4 |
3 2 1 |
|
|
AV-14FN15 |
|
|
|
|
|
|
|
|
|
|
|
VIDEO AUDIO |
MENU |
|
|
|
|
|
|
|
|
OK |
|
|
|
|
|
|
|
|
|
IN (VIDEO-2) |
|
|
|
|
|
|
|
|
9 |
8 |
7 |
6 |
5 |
4 |
3 2 1 |
|
|
AV-20NN15 |
|
|
|
|
|
|
|
|
|
|
|
VIDEO AUDIO |
MENU |
|
|
|
|
|
|
|
|
OK |
|
|
|
|
|
|
|
|
|
IN (VIDEO-2) |
|
|
|
|
|
|
Rear of the TV |
|
|
|
|
|
|
|
|
|
|
AV-14FN15 |
INPUT |
OUTPUT |
|
|
AV-20NN15 |
VIDEO-1 OUTPUT |
|
|
|
|
VIDEO-1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
INPUT |
|
|
|
|
VIDEO |
|
|
|
|
|
|
|
|
|
AUDIO |
|
|
|
|
VIDEO |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO |
|
|
|
= - 0 |
|
|
|
|
=- |
0 |
|
|
|
|
|
|
|
|
|
||
No. Button/terminal |
Description |
|
|
|
|
|
|
||
1 |
I (main power) |
Press to turn on or turn off the TV’s main power. |
|
||||||
2 |
Power lamp |
Indicate the TV is being turned on or off. |
|
|
|||||
|
|
No color : TV’s main power is being turned off. |
|
||||||
|
|
Red : TV’s main power is being turned on. |
|
|
|||||
3 |
TIMER lamp |
Lights when the TV is in the OFF TIMER mode. |
|
4Remote control sensor
5 |
VOLUME M |
Press to adjust the volume level. |
|
|
6 |
CHANNELM |
Press to select the desired channel. |
|
|
7 |
MENU |
Press to display the menu. |
|
|
8 |
IN (VIDEO-2) |
Video and audio input jacks for VIDEO-2 mode. |
||
9 |
|
Headphone jack. |
|
|
0 |
|
Antenna socket. |
|
|
- |
OUTPUT |
Video and audio output jacks. |
|
|
= |
VIDEO-1 INPUT |
Video and audio input jacks for VIDEO-1 mode. |
||
How to operate the menus with the TV button |
|
|||
TV button |
Work as same as the button on the |
Note |
||
remote control unit |
||||
|
|
|
||
MENU |
MENU/OK button |
To display main menu and exit |
||
|
|
|
menu after finish setting. |
|
CHANNEL M |
∞/5 button |
To select menu function. |
||
VOLUME M |
2/3 button |
To adjust the desired function. |
5
Setting up your TV
CAUTION
•Turn off the equipment including the TV before connecting.
1Connecting the antenna To install rod antenna
Install into the top-rear holder. Once installed, it cannot be removed.
Indoor antenna |
Rod antenna |
(1) |
|
|
|
VHF/UHF outdoor antenna |
Antenna holder |
|
Matching |
|
(2) |
|
|
|
antenna |
|
|
adapter |
|
(3) |
(supplied) |
|
Illustration of AV-14FN15 only
If you connect a VCR, connect the antenna output jack of your VCR and the antenna jack on the TV with the antenna cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of the TV with the video cable and audio cables. For details, see the manual of your VCR.
VHF/UHF outdoor antenna
Rear of the TV
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To audio/video |
|
To RF |
output |
|
output |
VCR To antenna input
The illustration shown is just a sample. It may not be same as your TV.
2 Connecting the compatible AC plug to the AC outlet.
3 Inserting batteries into the remote control.
Insert two batteries by following the ª and · polarities and inserting the · end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
•Use AA/R6/UM-3 dry cell batteries.
•If the remote control does not work properly, install new batteries. The supplied batteries are for testing, not regular use.
4 Turn on the TV by pressing the main power button.
JVC logo appears on the screen.
6
Setting up your TV (continued)
5 Making the initial settings
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then the TV will operate
by following steps as below:
•Press 5/∞ button to select AIR or CABLE, press the MENU/OK button. TV will start searching for the channels.
≠
To stop AUTO PROGRAM, press MENU/OK button.
7
•Press the red button to cancel the SETUP TOUR RESTART function.
If you want to make initial settings again when the next time you turn on the TV, press the MENU/OK button to activate the SETUP TOUR RESTART function.
≠
■
■
■
■
• To complete the initial setting, press the MENU/OK button. To set undesired channels to be skipped, see page 12.
•If the JVC logo does not appear, use AUTO PROGRAM function to make the initial settings. This function is located in the INSTALL menu.
•If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.
7
Basic setting for picture
COLOR SYSTEM
You can select the appropriate color system when the picture is not clear or no color appears.
Press the COLOR SYSTEM button to select a setting.
In TV mode: NTSC 3.58 MHz (Fixed)
In VIDEO mode:
AUTO PAL SECAM NTSC4.43 NTSC3.58
To operate this function with a menu:
MENU PICTURE PICTURE FEATURES COLOR SYSTEM
For the color system in each country or region, see the table below:
Area |
Country or Region |
System |
|
|
Bahrain, Kuwait, Oman, Qatar, |
|
|
|
United Arab Emirates, Yemen, etc. |
PAL |
|
|
Indonesia, Malaysia, Singapore, |
|
|
Asia, Middle |
Thailand, India, etc. |
|
|
East |
China, Vietnam, etc. |
PAL |
|
|
Hong Kong, etc. |
PAL |
|
|
Islamic Republic of Iran, Lebanon, |
SECAM |
|
|
Saudi Arabia, etc. |
|
|
|
Philippines, Taiwan, Myanmar, etc. |
NTSC |
|
|
Russia, etc. |
SECAM |
|
Europe |
Czech Republic, Poland, etc. |
PAL |
|
Germany, Holland, Belgium, etc. |
PAL |
||
|
|||
|
UK, etc. |
PAL |
|
Oceania |
Australia, New Zealand, etc. |
PAL |
|
|
Republic of South Africa, etc. |
PAL |
|
Africa |
Nigeria, etc. |
PAL |
|
|
Egypt, Morocco, etc. |
SECAM |
PICTURE MODE
You can choose the desired picture setting with one touch.
Press the PICTURE MODE button to select a setting.
SOFT |
Softens contrast and sharpness. |
BRIGHT |
Heightens contrast and sharpness. |
STANDARD |
Standard picture setting. |
USER |
You can change this picture setting |
|
as you like. |
|
Select USER and adjust following |
|
items in the PICTURE SETTING menu. |
|
(PICTURE, BRIGHT, DETAIL, COLOR, |
|
TINT*) |
*TINT can only be adjusted in NTSC system.
8
To operate this function with a menu:
MENU PICTURE PICTURE MODE
To return the USER setting to the default, press the blue button when the PICTURE SETTING menu appears.
Adjusting the picture - USER
You can adjust the desired picture setting when selecting USER in PICTURE MODE.
1 Select the USER in PICTURE MODE under PICTURE menu.
MENU PICTURE PICTURE MODE USER
2 Select the PICTURE SETTING in PICTURE menu, then adjust the setting.
|
MENU |
|
|
|
PICTURE |
|
|
PICTURE SETTING |
||
|
|
|
|
|||||||
|
|
|
|
|
||||||
PICTURE |
2 |
: Lower |
3 |
: Higher |
||||||
BRIGHT |
2 |
: Darker |
3 |
: Brighter |
||||||
DETAIL |
2 |
: Softer |
3 |
: Higher |
||||||
COLOR |
2 |
: Lighter |
3 |
: Deeper |
||||||
TINT* |
2 |
: Reddish |
3 |
: Greenish |
*TINT can only be adjusted in NTSC system.
WHITE BALANCE
You can change the white balance of the picture to better match the type of video being viewed. Select the WHITE BALANCE in the PICTURE menu, then choose the desired setting.
|
MENU |
|
|
PICTURE |
|
|
WHITE BALANCE |
|
|
|
|
|
|||||
|
|
|
|
|
||||
NORMAL |
|
|
Normal white balance. |
|
||||
COOL |
|
|
Bluish white. |
|
||||
WARM |
|
|
Reddish white. |
|
About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4.
Advance setting for picture
BLUE BACK
You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna.
Select the BLUE BACK in the INSTALL menu, then choose ON or OFF.
MENU INSTALL BLUE BACK
If you wish to continue viewing the poor picture, cancel the BLUE BACK function.
Original features for picture
CLOSED CAPTION
If they are included in a program, you can view closed captions or text information.
Press the CLOSED CAPTION button to select a setting.
OFF CLOSED CAPTION TEXT
To operate this function with a menu:
1 Select the CLOSED CAPTION in INPUT menu, then choose “CAPTION” or “TEXT”.
MENU INPUT CLOSED CAPTION
2 Press the 2/3 button to select the desired caption or text channel.
Advanced setting for sound
AI VOLUME
You can adjust the volume of all the channels and video inputs to the same level automatically. Select the AI VOLUME in SOUND menu, then choose ON or OFF.
MENU SOUND AI VOLUME
About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4.
9
Favorite channel and video setting
To register the favorite channel
You can register and recall 4 favorite channels by using the color buttons (red, green, yellow, blue).
1 In TV mode, select a TV channel (CH02CH69, CC01-CC125) you desired to register.
2 Press and hold a color button for 3 seconds or more.
“FAVORITE CHANNEL 7 PROGRAMMED!” appears on the screen and current channel is registered.
3 To register other favorite channels, repeat Step 1 to 2.
To recall the favorite channel, press the color button.
When the TV is in menu mode, favorite channel function is not available.
To adjust favorite channel setting (FAVORITE CH SETTING)
You can adjust the picture settings for the favorite channels.
1 Display the PICTURE menu and select FAVORITE CH SETTING in PICTURE FEATURES menu.
MENU PICTURE PICTURE FEATURES FAVORITE CH SETTING
2 Select FAVORITE CHANNEL in FAVORITE CH SETTING menu, then choose the desired favorite channel.
FAVORITE CH SETTING
FAVORITE CHANNEL
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 Select EFFECT, then press 2/3 button to choose ON.
To cancel the settings, choose OFF.
4 Select the desired item that you wish to adjust.
PICTURE BRIGHT DETAIL
TINT COLOR
5 Press the MENU/OK button to exit the menu.
To adjust the video setting (VIDEO SETTING)
You can adjust the picture settings for video inputs.
1 Display the PICTURE menu and select VIDEO SETTING in PICTURE FEATURES menu.
|
MENU PICTURE |
PICTURE FEATURES |
|
VIDEO SETTING |
|
2 Select VIDEO STATUS in VIDEO SETTING menu, then choose the desired video input.
|
VIDEO SETTING |
VIDEO STATUS |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
3 Select EFFECT, then press 2/3 button to choose ON. To cancel the settings, choose OFF.
4 Select the desired item that you wish to adjust.
PICTURE BRIGHT DETAIL
TINT COLOR
5 Press the MENU/OK button to exit the menu.
About the basic operations of the menu, please see the “How to operate menus
and menus locations” on page 4.
10
Customized setting
VNR
You can reduce the picture noise.
Select the VNR in the PICTURE FEATURES menu under PICTURE menu, then choose a setting of VNR function.
MENU PICTURE PICTURE FEATURES VNR
OFF |
VNR is turned off. |
AUTO |
Effect of VNR is automatically controlled. |
MIN |
Effect of VNR becomes minimum level. |
MAX |
Effect of VNR becomes maximum level. |
If you select MAX, the picture becomes softer even if the original picture is sharp.
CHILD LOCK
You can disable the front control buttons of the TV.
Select the CHILD LOCK in the FEATURES menu, then choose ON or OFF.
MENU FEATURES CHILD LOCK
OFF TIMER
You can set the TV to turn off automatically to standby mode after a set time.
Press the OFF TIMER button to select a desired period of time.
OFF TIMER
0 |
120 |
10
You can set the period of time to a maximum of 120 minutes in 10-minute steps.
To operate this function with a menu:
MENU FEATURES OFF TIMER
When the elapsed of time left one minute, “GOOD NIGHT!” appears on the screen.
You can display the OFF TIMER menu again to confirm or change the remaining time.
AUTO SHUTOFF
You can set the TV to turn off automatically when no signal is received for about 15 minutes or longer after the end of a broadcast.
Select AUTO SHUTOFF in INSTALL menu, then choose ON or OFF.
MENU INSTALL AUTO SHUTOFF
The AUTO SHUTOFF function does not turn off the TV’s main power.
The AUTO SHUTOFF function is not available in video mode.
EXT. INPUT (TV/ VIDEO)
You can select TV or video terminal input with one touch.
Press the TV/VIDEO button to select an input.
To operate this function with a menu:
MENU INPUT EXT.INPUT
DISPLAY
You can display the program number, video terminal number on the screen.
Press the DISPLAY button to display the indication on screen.
To operate this function with a menu:
MENU INPUT DISPLAY
About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4.
11