w 130
L
C
24"
Penetration into cabinet:
Cutout height:
Recommended cutout location from floor :
Cutout width:
Minimum cabinet width:
Minimum inside cabinet depth:
Overall unit width:
Overall unit height:
24"
28"
30 1/2"
4 3/4"
20 1/2"
34"
28 1/8"
30 1/8"
33"
Distance from opening floor
to centerline of electrical:
Distance (left) from opening centerline
to centerline of electrical:
24 11/16"
2 1/4"
Cabinet Opening
(not to scale)
34"
28 1/8"
30 1/8"
33"
24 11/16"
2 1/4"
24"
Distance from face of cabinet to
front of closed door handle:
Distance from face of cabinet to
outer edge of open door(s):
Top overlap:
Bottom overlap:
Right side overlap:
Left side overlap: 3/16"
3/16"
0"
see below
Oven overlap distances when using
cutout dimensions listed above:
Overall Dimensions
(not to scale)
24"
28"
4 3/4"
30 1/2"
Provide for 120/240,
120/208-volt electrical
connection in this area.
• The unit does NOT overlap the top of the opening.
There is a trim piece that covers the top edge of the
cutout a very small amount (less than 1/16").
• Maximum cutout width: 30 1/4"
• IMPORTANT: nylon grip nuts that hold crate bottom
must be removed before installation.
• Total connected load: 5.9KW, 24.6 amps @120/240v
or 4.4KW, 21.2 amps @120/208v. 3 wire single phase,
60Hz.
•A complete floor is recommended to prevent unusual
drafts and capable of supporting 160 lbs.
• Minimum distance from bottom of opening to any
object protruding from cabinet face (i.e. cabinet door)
directly below: 1" (because it is an air flow area)
SEE PAGE 2 FOR UNDERCOUNTER INSTALLATION
www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
• Dimensions (Actual Size) •
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
30" Undercounter or Wall Ovens:
W130, W130W, W131B and W131W
• Product Model Number (s): •
Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter-
mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2000.
This Data Sheet Includes Information On
BN205 • A203B149 • 31469 • 002906 • 112048 • 11509
• Additional Information •
203
Jenn-Air
Loading...