Hobart SLA-5 User Manual
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
SECURITY
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
AUTOMATICALLY APPLIES AN EAS TAG
TO MEAT PACKAGES
The new Hobart Security Label Applier can automatically attach an EAS tag to the backside of
the scale label. The EAS tag is hidden underneath
the scale label. The Security Label Applier can be
added to any existing or new Hobart Access scale
system. It can be programmed so that only packages above a set value will get a security tag.
FEATURES
■ Auto apply EAS Tag on Demand
■ Uses standard roll of EAS Tags
■ Tag is hidden under scale label
■ Alert operator when out of tags
■ Easy to load/thread security tags
LABEL APPLIER
Checkpoint
Tag
Rear or Sticky
Side of Label
Sensormatic
Tag
BENEFITS
■ Labor savings
■ Only higher prot items get tagged
■ Consistent tag location helps insure deactivation
Specications, Details and Dimensions on Reverse Side.
Rear or Sticky
Side of Label
SECURITY LABEL APPLIER
F-39731 – Security Label Applier Page 1 of 2
SECURITY
LABEL APPLIER
SPECIFICATIONS
ELECTRICAL:
110 VAC, 60 Hz, 1 amp
SHIPPING WEIGHT:
25 lbs.
CONSTRUCTION:
Durable Kydex casing with stainless and
aluminum components
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
SLA-5 shown with CLA and Access System
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
Page 2 of 2 F-39731 – Security Label Applier
F-39731 (REV. 02/09) LITHO IN U.S.A. (H-01)
Loading...