■ Easily Removable Door Gasket without the Use
of Tools
■ Condensing unit mounted on the top
■ Hot gas condensate removal
■ R404a Refrigerant Freezer
■ Non-Standard Door Hinging Available at No
Extra Cost
FROZEN FOOD CABINETS
MODELS
❑ QEF1 – Single Section Unit
❑ QEFD1 – Single Section Roll-Through Unit
❑ QEF2 – Two Section Unit
❑ QEFD2 – Two Section Roll-Through Unit
❑ QEF3 – Three Section Unit
❑ QEFD3 – Three Section Roll-Through Unit
OPTIONS
❑ Roll-Through
❑ Rear Cladding
❑ Padlock Posts – Field Installed by Others
Specifications, Details and Dimensions on Inside and Back.
EASILY REMOVABLE GASKETS: Solid door
gaskets are easily removed without tools for cleaning
or replacement, eliminating the expense of a service call.
FIELD REHINGEABLE DOOR: Maximum flexibility for
layout changes.
CHOICE OF TWO FINISHES: Allows customer to choose
the best finish for their application. Units are available in:
stainless steel exterior and interior; stainless steel
exterior, DuraFinish interior with stainless steel bottom.
WARRANTY: The QE series cabinet warranty is for two
years. It includes parts, labor, and travel during normal
working hours in the Continental United States.
REFRIGERATION SYSTEM: Unitized and located on top
of the cabinet consisting of:
■ Motor-Compressor, high starting torque, hermetic
rated as follows:
❑ 1 Section –
❑ 2 Section – 1
❑ 3 Section – 1
3
⁄4 h.p. and rated 2840 BTU at
90°F ambient and -10°F evaporator
temperature.
1
⁄2 h.p. and rated 5600 BTU at
90°F ambient and -10°F evaporator
temperature.
3
⁄4 h.p. and rated 8460 BTU at
90°F ambient and -10°F evaporator
temperature.
FOOD EQUIPMENT
■ Condenser fan and fan motor.
■ Heavy duty condenser, copper and aluminum
designed to match motor compressor rating.
■ Evaporator coil large enough to match motor-
compressor rating and provide 0°F. cabinet
temperature.
■ Coil fan and fan motor.
■ Removable, insulated coil housing.
■ Temperature control.
■ Defrost coil heaters and temperature limit controls.
■ Defrost clock, time actuated and terminated.
■ Refrigeration inside cabinet is by fan circulated
air which is drawn up through vents in the ceiling,
passed through cooling coils, and returned to the
cabinet through Hobart louvered down-duct(s) that
provide uniform cooling throughout the cabinet,
regardless of the loading pattern. Defrosting is
interior with stainless steel bottom After the series the
sections, and if the unit is a pass-through, will be indicated
by the following:
D: Pass-through unit
1: one section
2: two section
3: three section
QESF SERIES
■ Exterior: Front housing, ends and doors are No. 4
finish stainless steel. Front door frame is extruded
thermal plastic providing an efficient thermal break
between cabinet exterior and interior. Exterior top,
back and bottom are galvanized steel.
■ Interior: Liner is crimped construction of No. 4 finish
stainless steel with
one piece ABS thermoplastic. Liner bottom is .029 inch
stainless steel.
QESAF
■ Exterior: Front housing, ends and doors are No. 4
finish stainless steel. Front door frame is extruded
thermal plastic providing an efficient thermal break
between cabinet exterior and interior. Exterior top,
back and bottom are galvanized steel.
3
⁄8" radius bends. Door drums are of
FROZEN FOOD CABINETS
HARDWARE AND FITTINGS: Heavy-duty, bumper-type
door handle positioned horizontally with cylinder locks.
Positive action door hinged mechanism fitted with stops
are chromium plated and are mounted to reveal full
door opening when door is open past 90 degrees. Door
stays open at 105 degrees, and self close at less than
90 degrees. Solid doors are field rehingeable. Door
gaskets are of smooth, high quality vinyl and are easily
replaceable without the use of tools. Exterior, solar
powered, digital thermometer is standard on all cabinets.
Inclined exterior stainless steel ramp is provided as
standard.
PLUMBING: No plumbing connections are required.
Condensate water automatically evaporated from the
top of the cabinet. Water drains from refrigeration coil
to a corrosion-resistant plastic tray where evaporation
is assisted by the condenser fan and heat from the
corrosion-discharge line.
INSULATION: Two inch, CFC Free Polyurethane foam,
poured, expanded and bonded in place, completely filing
all cavities between interior and exterior surfaces of the
cabinet and doors.
OPTIONS:
❑ Roll-Through
❑ Rear Cladding
❑ Padlock Posts- Field Installed by Others
■ Interior: Liner is crimped construction of DuraFinish
aluminum with
finish stainless steel. Door drums are of one piece ABS
thermoplastic. Liner bottom is .029 inch stainless steel.
3
⁄8" radius bends. Liner bottom is No. 4
QE SERIES ROLL-IN
FROZEN FOOD CABINETS
DETAILS AND DIMENSIONS
FOOD EQUIPMENT
ELECTRICAL DATAQEF1QEF2QEF3
HORSEPWER
3
⁄411⁄213⁄4
REFRIGERANTR-404aR-404aR-404a
STANDARD VOLTAGE120/60/1120/208-240(3W)/60/1120/208-240(3W)/60/1
MAX WATTS225034663362
MAX AMPS18.715.014.6
PHYSCIAL DATAQEF1QEF2QEF3
Net cubic Feet of Capacity35.374.5113.2
Interior Dimensions68"H x 301⁄2"D x 293⁄8"W68"H x 301⁄2"D x 625⁄8"W68"H x 301⁄2"D x 96"W