Echo PAS-266 User Manual

0 (0)

PAS-266

Pro Attachment

SeriesTM

Operator’s Manual

Burn Hazard

The muffler or catalytic muffler and surrounding cover may become extremely hot. Always keep clear of exhaust and muffler area, otherwise serious personal injury may occur.

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Users of this equipment risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. ECHO provides an operator’s manual and a safety manual. Both must be read and understood for proper and safe operation. Failure to do so could result in serious injury.

Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.

X7502026902

TABLE OF CONTENTS	PAS-266
TABLE OF CONTENTS
Table of Contents ..............................................................................................................................	2
Introduction ........................................................................................................................................	3
The Operator’s Manual ..........................................................................................................	...... 3
The Safety Manual.......................................................................................................................	3
Servicing Information .........................................................................................................................	3
Parts/Serial Number.....................................................................................................................	3
Service .........................................................................................................................................	3
Echo Consumer Product Support ................................................................................................	3
Warranty Registration ..........................................................................................................	........ 3
Additional or Replacement Manuals ............................................................................................	4
Safety.................................................................................................................................................	4
Manual Safety Symbols and Important Information .....................................................................	4
International Symbols ..........................................................................................................	........ 5
Personal Condition and Safety Equipment ..................................................................................	5
Equipment....................................................................................................................................	8
Emission Control (Exhaust & Evaporative).......................................................................................	. 9
EPA 2010 and Later and/or C.A.R.B. TIER III .............................................................................	9
Description.......................................................................................................................................	10
Contents ..........................................................................................................................................	12
Assembly .........................................................................................................................................	13
Power Head Shaft/Lower Shaft Assembly .................................................................................	13
Front Handle Installation ......................................................................................................	...... 13
Operation .........................................................................................................................................	14
Fuel ............................................................................................................................................	14
Starting Cold Engine ..................................................................................................................	15
Starting Warm Engine...........................................................................................................	..... 17
Stopping Engine.........................................................................................................................	17
Maintenance ....................................................................................................................................	18
Skill Levels .................................................................................................................................	18
Maintenance Intervals..........................................................................................................	...... 18
Air Filter......................................................................................................................................	19
Fuel Filter ...................................................................................................................................	19
Cooling System..........................................................................................................................	20
Exhaust System .........................................................................................................................	21
Carburetor Adjustment..........................................................................................................	..... 22
Lubrication .................................................................................................................................	23
Troubleshooting ...............................................................................................................................	25
Storage ............................................................................................................................................	26
Long Term Storage (Over 30 Days)...........................................................................................	26
Specifications...................................................................................................................................	27
ECHO Approved Optional Attachments.....................................................................................	28
Warranty Statements .......................................................................................................................	29
Notes ...............................................................................................................................................	31

2	X7502026902

PAS-266	INTRODUCTION

INTRODUCTION

Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of helpful operating tips and SAFETY messages.

The Operator’s Manual

Keep it in a safe place for future reference. Contains specifications and information for safety, operation, maintenance, storage and assembly specific to this product.

The Safety Manual

Keep it in a safe place for future reference. Explains possible hazards and the measures you should take to insure safe operation.

SERVICING INFORMATION

Parts/Serial Number

Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number and Serial Number of the unit with you. You can find these numbers on the engine housing. For future reference, write them in the space provided below.

Model No. _________________ SN. ___________________

Service

Service of this product during the warranty period must be performed by an Authorized ECHO Service Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site. When presenting your unit for Warranty service/repairs, proof of purchase is required.

Echo Consumer Product Support

If you require assistance or have questions concerning the application, operation or maintenance of this product you may call the ECHO Consumer Product Support Department at 1-800-673-1558 from 8:30 am to 4:30 pm (Central Standard Time) Monday through Friday. Before calling, please know the model and serial number of your unit.

Warranty Registration

To ensure trouble free warranty coverage it is important that you register your ECHO equipment on-line at www.echo-usa.com or by filling out the warranty registration card supplied with your unit. Registering your product confirms your warranty coverage and provides a direct link between you and ECHO if we find it necessary to contact you.

X7502026902

SAFETY	PAS-266

Additional or Replacement Manuals

Replacement Operator, Safety Manuals, and Parts Catalogs are available from your ECHO dealer or at www.echo-usa.com or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 (800-673-1558). Always check the ECHO Web Site for updated information.

Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video.

SAFETY

Manual Safety Symbols and Important Information

Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you.

The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition which WILL lead to serious personal injury or death if not avoided.

The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condition which CAN lead to serious personal injury or death if not avoided.

The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided.

The enclosed message provides information necessary for the protection of the unit.

Note: This enclosed message provides tips for use, care and maintenance of the unit.

CIRCLE AND SLASH SYMBOL

This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result in serious or fatal injury.

4	X7502026902

PAS-266	SAFETY

International Symbols

Symbol	Description	Symbol	Description	Symbol	Description	Symbol	Description
	Warning, See		Carburetor		DO NOT allow
	Warning, See		Adjustment -		DO NOT allow		Ignition
	Operator’s		Adjustment -		flames or		Ignition
	Operator’s		High speed		flames or		ON / OFF
	Manual		High speed		sparks near fuel		ON / OFF
	Manual		mixture		sparks near fuel
			mixture
	Wear eye, ear		Carburetor		DO NOT smoke
	and head		Adjustment -		DO NOT smoke		Primer Bulb
	and head		Adjustment -		near fuel		Primer Bulb
	protection		Idle speed		near fuel
	protection		Idle speed
	Wear hand		Carburetor		Choke Control		Choke Control
	Wear hand		Adjustment -		Choke Control		“Cold Start”
	and foot		Adjustment -		“Run” Position		“Cold Start”
	and foot		Low speed		“Run” Position		Position (Choke
	protection		Low speed		(Choke Open)		Position (Choke
	protection		mixture		(Choke Open)		Closed)
			mixture				Closed)
	Safety/Alert		Emergency		Keep feet away		RotatingCutting
	Safety/Alert		Stop		from blade		Attachment
			Stop		from blade		Attachment
	Hot Surface		Fuel and oil			Keep bystanders and helpers
	Hot Surface		mixture			away 15 m (50 ft.).
			mixture			away 15 m (50 ft.).
		AVOID KICKOUT.			Thrown
		Keep bystanders at least 15 meters			Thrown		Wear face shield.
		Keep bystanders at least 15 meters			objects		Wear face shield.
		(50 feet) away.			objects
		(50 feet) away.
		Beware Thrown Objects			Finger Severing		Wear slip
		Wear Eye Protection			Finger Severing		resistant footwear
		Wear Eye Protection					resistant footwear
	Do not operate
	closer than 15 M
	(50 ft.) from
	electrical		DO NOT USE		Plan retreat path
	hazards. Keep		BLADES - Line		fromfalling
	bystanders at		Head Only		objects.
	least15meters
	(50 feet) away.

Personal Condition and Safety Equipment

Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating unit.

Physical Condition

Your judgment and physical dexterity may not be good:

•if you are tired or sick,

•if you are taking medication,

•if you have taken alcohol or drugs.

X7502026902

SAFETY	PAS-266

Operate unit only if you are physically and mentally well.

Eye Protection

Eye protection that meets ANSI Z87.1 or CE requirements must be worn whenever you operate the unit.

Hand Protection

Wear no-slip, heavy duty work gloves to improve your grip on the handles. Gloves also reduce the transmission of machine vibration to your hands.

Breathing Protection

Wear a facemask to protect against dust.

Hearing Protection

ECHO recommends wearing hearing protection whenever unit is used.

Proper Clothing

Wear snug fitting, durable clothing;

•Pants should have long legs, shirts with long sleeves.

•DO NOT WEAR SHORTS,

•DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or hanging items that could become entangled in moving parts or surrounding growth.

Wear sturdy work shoes with nonskid soles;

•DO NOT WEAR OPEN TOED SHOES,

•DO NOT OPERATE UNIT BAREFOOTED. Wear no-slip, heavy duty work gloves.

Keep long hair away from engine and air intake. Retain hair with cap or net.

Hot Humid Weather

Heavy protective clothing can increase operator fatigue which may lead to heat stroke. Schedule heavy work for early morning or late afternoon hours when temperatures are cooler.

The ignition components of this machine generate an electromagnetic field during operation which may interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons with pacemakers should consult with their physician and the pacemaker manufacturer before operating this machine. In the absence of such information, ECHO does not recommend the use of ECHO products by anyone who has a pacemaker.

6	X7502026902

PAS-266	SAFETY

Vibration and Cold

It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sensations, followed by loss of color and numbness in the fingers. The following precautions are strongly recommended, because the minimum exposure, which might trigger the ailment, is unknown.

•Keep your body warm, especially the head, neck, feet, ankles, hands, and wrists.

•Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks, and also by not smoking.

•Limit the hours of operation. Try to fill each day with jobs where operating the unit or other hand-held power equipment is not required.

•If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration.

Repetitive Stress Injuries

It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve that runs through the area. Some believe that prolonged exposure to vibration may contribute to CTS. CTS can cause severe pain for months or even years.

To reduce the risk of RSI/CTS, do the following:

•Avoid using your wrist in a bent, extended, or twisted position. Instead try to maintain a straight wrist position. Also, when grasping, use your whole hand, not just the thumb and index finger.

•Take periodic breaks to minimize repetition and rest your hands.

•Reduce the speed and force with which you do the repetitive movement.

•Do exercise to strengthen the hand and arm muscles.

•Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness, or pain in the fingers, hands, wrists, or arms. The sooner RSI/CTS is diagnosed, the more likely permanent nerve and muscle damage can be prevented.

Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death.

X7502026902

SAFETY	PAS-266

Read the Manuals

•Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation.

Clear the Work Area

•Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use.

Keep a Firm Grip

•Hold both handles with thumbs and fingers encircling the grips.

Keep a Solid Stance

•Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.

Avoid Hot Surfaces

•Keep exhaust area clear of flammable debris. Avoid contact during and immediately after operation.

Equipment

Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual.

•Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.

•Inspect guards and shields for damage and to ensure that they are securely in place. Replace if damaged or missing.

•Check that the attachment is firmly attached and in safe operating condition.

•Check that handle and harness (if included) are adjusted for safe, comfortable operation. See Assembly Section for proper adjustment.

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings.

ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.

DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.

NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.

8	X7502026902

PAS-266	EMISSION CONTROL (EXHAUST & EVAPORATIVE)

Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or leaks are found, do not use unit, otherwise serious personal injury or property damage may occur. Have unit repaired by an authorized servicing dealer before using.

EMISSION CONTROL (EXHAUST & EVAPORATIVE)

EPA 2010 and Later and/or C.A.R.B. TIER III

The emission control system for the engine is EM (engine modification) and, if the second to last character of the Engine Family on the Emission Control Information label (sample below) is “C”, “K”, or “T”, the emission control system is EM and TWC (3-way catalyst). The fuel tank/fuel line emission control system is EVAP (evaporative emissions). Evaporative emissions for California models are only applicable to fuel tanks.

An Emission Control Label is located on the engine. (This is an

EXAMPLE ONLY, information on label varies by engine FAMILY).

Product Emission Durability (Emission Compliance Period)

The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved

maintenance procedures are followed as listed in the Maintenance Section of this manual.

X7502026902

DESCRIPTION

PAS-266

DESCRIPTION

Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information.