PAS Articulating Hedge Clipper Attachment |
1 |
Operator's Manual |
PAS Articulating Hedge Clipper Attachment
Operator's Manual
MODEL |
99944200595 |
FOR MODELS: |
SRM-2100SB |
|
SRM-2400SB |
|
SRM-210SB/211SB/225SB |
|
SRM-260SB/261SB |
|
PAS-2100 |
|
PAS-2400 |
|
PAS-2601 |
|
PAS-210/211 |
|
PAS-225/225VP/225VPB |
|
PAS-230/231 |
|
PAS-260/261 |
|
PAS-265/266 |
WARNING
Users of this equipment risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. ECHO provides an operator’s manual and a safety manual. Both must be read and understood for proper and safe operation. Failure to do so could result in serious injury.
X7532095605 |
X753001925 |
|
04/13 |
||
|
2
Introduction
Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job- dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of helpful operations tips and SAFETY messages.
the operator's manual
Keep it in a safe place for future reference. Contains specifications and information for safety, operation, maintenance, storage, and assembly specific to this product.
the safety manual
Keep it in a safe place for future reference. Explains possible hazards and the measures you should take to insure safe operation.
PAS ARTICULATING HEDGE CLIPPER ATTACHMENT |
1 |
OPERATOR'S MANUAL |
PAS Articulating Hedge Clipper Attachment
Operator'sManual
MODEL 99944200595
FOR MODELS: SRM-2100SB/2400SB
SRM-210SB/211SB SRM-225SB SRM-260SB/261SB PAS-2100/2400 PAS-210/211 PAS-230/231 PAS-260/261 PAS-2601
PAS-265
WARNING
Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a Safety Manual for Pro Attachment Series power source or Split Boom Trimmer. Those manuals and this manual must be read and understood for proper and safe operation, otherwise serious personal injury may result.
X7532095603 |
X753001923 |
01/09 |
Table of Contents |
|
|
Introduction....................................................................... |
2 |
|
- |
The Operator's Manual............................................... |
2 |
- |
The Safety Manual..................................................... |
2 |
Safety................................................................................. |
3 |
|
- Manual Safety Symbols and Important Information.. 3 |
||
- |
International Symbols................................................. |
3 |
- Personal Condition and Safety Equipment................. |
4 |
|
- |
Equipment.................................................................. |
6 |
Description........................................................................ |
6 |
|
Contents............................................................................. |
7 |
|
Assembly........................................................................... |
8 |
|
- Power Head Shaft/Lower Shaft Assembly................. |
8 |
|
- Front Loop Handle Removal...................................... |
8 |
|
Operation........................................................................... |
9 |
|
- |
Adjusting Cutting Angle............................................. |
9 |
- |
Rotate Cutter Assembly............................................ |
10 |
- |
Hedge Trimming....................................................... |
10 |
Copyright© 2013 By Echo, Incorporated
All Rights Reserved.
Maintenance............................................................. |
11 |
|
- |
Skill Levels........................................................ |
11 |
- |
Maintenance Intervals....................................... |
11 |
- |
Lubrication........................................................ |
11 |
- |
Sharpening Blades............................................ |
13 |
- |
Blade Adjustment.............................................. |
14 |
Storage...................................................................... |
15 |
|
Specifications............................................................ |
15 |
|
Warranty Statement.................................................. |
17 |
|
Servicing Information............................................... |
20 |
|
- |
Parts/Serial Number.......................................... |
20 |
- |
Service............................................................... |
20 |
- |
ECHO Customer Assistance.............................. |
20 |
- |
Warranty Card................................................... |
20 |
- |
Additional or Replacement Manuals................. |
20 |
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.
PAS Articulating Hedge Clipper Attachment |
3 |
Operator's Manual |
Safety
WARNING
Refer to your Pro Attachment Series or Split Boom Operator's Manual for correct engine fueling, starting and stopping instructions.
manual safety symbols and important information
Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you.
DANGER
The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition which WILL lead to serious personal injury or death if not avoided.
WARNING
The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condition which CAN lead to serious personal injury or death if not avoided.
CAUTION
The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided.
Circle and slash symbol
This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result in serious or fatal injury.
NOTE
This enclosed message provides tips for use, care and maintenance of the unit.
IMPORTANT
The enclosed message provides information necessary for the protection of the unit.
international symbols
Symbol form/shape |
Symbol |
Symbol form/shape |
Symbol |
||
description/application |
description/application |
||||
|
|
|
|
|
|
|
Read and under- |
|
|
|
Safety/Alert |
|
stand Operator's |
|
|
|
|
|
Manual. |
|
|
|
|
|
|
|
|
|
|
|
Wear eyes, ears |
|
|
|
Finger Severing |
|
and head protec- |
|
|
|
|
|
tion |
|
|
|
|
|
|
|
|
|
|
|
Wear hand and |
|
|
|
Rotating |
|
|
|
|
Cutting Attach- |
|
|
foot protection |
|
|
|
|
|
|
|
|
ment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wear Face Shield |
|
|
|
Wear slip resis- |
|
|
|
|
tant foot wear. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Do not operate closer |
|
Keep feet away |
|
|
|
than 15 M (50 ft.) from |
|
|
|
|
electrical hazards. |
|
|
from blade |
|
|
|
Keep bystanders |
|
|
|
|
|
at least 15 meters |
|
|
|
|
|
(50 feet) away. |
|
|
|
|
|
|
Symbol form/shape |
Symbol |
Symbol form/shape |
Symbol |
description/application |
description/application |
||
|
DO NOT USE |
|
Thrown |
|
BLADES - Line |
|
|
|
Head Only |
|
objects |
Plan retreat path from falling objects.
AVOID KICKOUT
Keep bystanders at least 15 meters (50 feet) away.
Beware Thrown Objects
Wear Eye Protection
Keep bystanders and helpers away 15 meters (50 feet) away.
4
personal condition and safety equipment
WARNING
Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating unit.
Physical Condition
Your judgment and physical dexterity may not be good:
•if you are tired or sick,
•if you are taking medication,
•if you have taken alcohol or drugs.
Operate unit only if you are physically and mentally well.
Eye Protection
Wear eye protection that meets ANSI Z87.1 or CE requirements whenever you operate the unit.
Hand Protection
Wear no-slip, heavy-duty work gloves to improve your grip on the handle. Gloves also reduce the transmission
of machine vibration to your hands.
Proper Clothing
Wear snug fitting, durable clothing;
•Pants should have long legs, shirts with long sleeves.
•DO NOT WEAR SHORTS,
•DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or hanging items that could become entangled in moving parts or surrounding growth..
Wear sturdy work shoes with nonskid soles;
•DO NOT WEAR OPEN TOED SHOES,
•DO NOT OPERATE UNIT BAREFOOTED. Wear no-slip, heavy duty work gloves.
Keep long hair away from engine and air intake. Retain hair with cap or net.
Hearing Protection
ECHO recommends wearing hearing protection whenever unit is used.
Extended Operation/Extreme Conditions
Hot Humid Weather
Heavy protective clothing can increase operator fatigue which may lead to heat stroke. Schedule heavy work for early morning or late afternoon hours when temperatures are cooler.
It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sensations, followed by loss of color and numbness in the fingers. The following precautions are strongly recommended, because the minimum exposure, which might trigger the ailment, is unknown.
•Keep your body warm, especially the head, neck, feet, ankles, hands, and wrists.
•Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks, and also by not smoking.
•Limit the hours of operation. Try to fill each day with jobs where operating the unit or other hand-held power equipment is not required.
•If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration.
PAS Articulating Hedge Clipper Attachment |
5 |
Operator's Manual |
Repetitive Stress Injuries
It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve that runs through the area. Some believe that prolonged exposure to vibration may contribute to CTS. CTS can cause severe pain for months or even years.
To reduce the risk of RSI/CTS, do the following:
•Avoid using your wrist in a bent, extended, or twisted position. Instead try to maintain a straight wrist position. Also, when grasping, use your whole hand, not just the thumb and index finger.
•Take periodic breaks to minimize repetition and rest your hands.
•Reduce the speed and force with which you do the repetitive movement.
•Do exercise to strengthen the hand and arm muscles.
•Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness, or pain in the fingers, hands, wrists, or arms. The sooner RSI/CTS is diagnosed, the more likely permanent nerve and muscle damage can be prevented.
danger
Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death.
Read the Manuals
•Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation.
Clear the Work Area
•Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use.
Keep a Firm Grip
•Hold the front and rear handles with both hands, with thumbs and fingers encircling the handles.
Keep a Solid Stance
•Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.
Cutting Angle Adjustments
•Only adjust cutting blade angle with unit flat on the ground, with the engine stop switch in the “STOP” position. Never adjust cutting angle with unit standing upright.
Avoid Hot Surfaces
•Keep exhaust area clear of flammable debris. Avoid contact during and immediately after operation.
6
equipment
WARNING
Use this attachment with ECHO approved models only. Serious injury may result from the use of this attachment combined with a non approved ECHO product.
•Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.
•Never adjust blades when the engine is operating.
•Inspect hand guard for damage. Replace if damaged or missing.
•Check that the blade assembly is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used.
NOTE
ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO.
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings.
•ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
•DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.
•NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.
Description
Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instruc-
tions on them. If a decal cannot be read, a new one can be ordered from your ECHO Dealer. See PARTS ORDERING |
|
instructions for specific information. |
3 |
|
|
|
8 |
|
4 |
|
Shaft Decal |
5 |
2 |
15 M - 50 FT
ESP PELIGRO
Tholam ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat Rautem vel eum iriure dolor in hendrerit velit esse amet feugiat in vulputate velit. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex adipis. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse amet feugiat Tholam ipsum dolor sit amet, consectetuer adipiscing elit, sed diam quis
FR DANGER
Tholam ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat Rautem vel eum iriure dolor in hendrerit velit esse amet feugiat in vulputate velit. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex adipis. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse amet feugiat Tholam ipsum dolor sit amet, consectetuer adipiscing elit, sed diam quis nostrud exerci tation ullamcorper suscipit
DANGER
Tholam ipsum dolor sit amet, |
Bholam ipsum dolor sit amet, |
|
||||||
consectetuer adipiscing |
elit, sed |
consectetuer |
adipiscing |
elit, |
sed |
|
||
diam nonummy nibh |
euismod |
diam nonummy |
nibh |
euismod |
|
|||
tincidunt ut laoreet dolore magna |
tincidunt ut laoreet dolore magna |
|
||||||
aliquam erat volutpat Rautem vel |
aliquam erat volutpat Rautem vel |
|
||||||
Oum iriure dolor in hendrerit velit |
eum iriure dolor in Dendrerit velit |
|
||||||
esse amet feugiat in vulputate |
esse amet feugiat in vulputate velit. |
|
||||||
velit. Ut wisi enim ad minim |
Ut wisi enim ad minim veniam, quis |
|
||||||
veniam, quis nostrud exerci tation |
nostrud |
exerci tation ullamcorper |
|
|||||
ullamcorper Muscipit lobortis nisl |
suscipit lobortis nisl ut aliquip ex |
|
||||||
ut aliquip ex adipis. Duis autem vel |
adipis. Duis autem vel eum iriure |
|
||||||
eum iriure dolor in hendrerit in |
dolor in hendrerit in vulputate velit |
|
||||||
vulputate velit esse amet feugiat |
esse amet feugiat Tholam ipsum |
|
||||||
Tholam ipsum dolor sit amet, |
dolor |
sit |
amet, |
consectetuer |
6 |
|||
consectetuer Adipiscing |
elit, sed |
adipiscing elit, sed diam quis |
||||||
diam quis nostrud exerci tation |
nostrud |
exerci tation ullamcorper |
||||||
ullamcorper suscipit lobortis nisl |
suscipit |
lobortis |
nisl |
sed |
diam |
|||
|
|
|
|
|
|
X505-002530 |
|
1
7