DTG-2K
DIGITAL TEST GAUGE
The DTG-2K Digital Test Gauge offers an accurate and convenient replacement to standard analogue test gauges. Available in five
standard ranges the unit can display a variety of pressure units including bar, mbar, kg/cm2, psi, MPa.
A compact instrument, the DTG-2K is ideally suited as a Master Test Gauge for operation with TTI’s Pneumatic or Hydraulic
Pressure Pumps, enabling simplified and efficient calibration.
The measuring element of the gauge is a fully isolated piezo-resistive pressure transducer chosen for its stability, high accuracy,
and reliability. It is well suited for both static and dynamic applications and is capable of capturing transient pressure pulses with
durations of only microseconds.
• 0.2% FS Accuracy
• 5 Ranges Available between -1 to 1000 bar, -14.5 to 10,000 psi
• 5 Selectable Pressure Units
• All Stainless Steel (316) Welded Pressure Cavity
• Four-Digit Resolution
• Simple Battery Replacement
• Peak Hold Facility
• Max. & Min. Read Facility
• Auto Switch Off or Continuous Use Selection
• Convenient 3" Diameter Face
• Ideal Replacement for Analogue Test Gauges
SPECIFICATIONS
RANGE RESOLUTION OVERRANGE OVERPRESSURE
-1 to 3 bar, 45 PSI 1 mbar, 0.015 psi 3.5 bar, 52 psi 10 bar, 150 psi
-1 to 30 bar, 450 PSI 10 mbar, 0.15 psi 35 bar, 520 psi 60 bar, 900 psi
0 to 300 bar, 4500 PSI 100 mbar, 1.50 psi 400 bar, 6000 psi 400 bar, 6000 psi
0 to 700 bar, 10,000 PSI 200 mbar, 3.0 psi 700 bar, 10,000 psi 700 bar, 10,000 psi
0 to 1000 bar 200 mbar, 3.0 psi 1000 bar 1000 bar
ACCURACY 0.2% F.S. standard (<1% FS in overrange)
PEAK VALUE Measured 5000 times per second
DISPLAY UPDATE Twice per second
BATTERY 3V type CR 2430
BATTERY LIFE “BATT LOW” Warning on display
Mano-Mode 1400 hours continuous operation
Peak-Mode 180 hours continuous operation
PRESSURE PORT 1/4 BSP male or 1/4 NPT male
PROTECTION IP65
OPERATING TEMPERATURE 0 to 50°C (32 to 122°F)
STORAGE TEMPERATURE -30 to 80°C (-22 to 176°F)
COMPENSATED TEMPERATURE RANGE 0 to 50°C (32 to 122°F)
DIMENSIONS 3 DIA x 4.6 x 0.4 in.
WEIGHT 0.5 lb.
SWITCH OFF By key or auto switch off after 15 minutes
ORDERING INFORMATION
DTG-2K-3 Digital test gauge -1 to 3 bar G, -14.5 to 45 psi $ 495
DTG-2K-30 Digital test gauge -1 to 30 bar G, -14.5 to 450 psi 495
DTG-2K-300 Digital test gauge 0 to 300 bar G, 0 to 4500 psi 495
DTG-2K-700 Digital test gauge 0 to 700 bar G, 0 to 10,000 psi 495
DTG-2K-1000 Digital test gauge 0 to 1000 bar G, 0 to 15,000 psi 495
Information subject to change without notice. Prices in USD. V044.6