How it Works
D-Link
Loading...
DCS-2210
User Manual [fr]
67 pgs5.05 Mb0
Service Manual
61 pgs5.32 Mb0
User Manual [de]
3 pgs249 Kb0
User Manual [ru]
9 pgs1.65 Mb0
User Manual
67 pgs7.11 Mb0
User Manual
42 pgs1.19 Mb0
Table of contents
Loading...

D-Link DCS-2210 Service Manual

Table of Contents
Product Overview ........................................................ 4
Package Contents ................................................... 4
System Requirements ............................................. 4
Hardware Overview .....................................................5
Front ..................................................................5
Rear ................................................................... 6
Side ....................................................................7
Conguration with Wizard ........................................ 8
Conguration ............................................................. 13
Web-based Conguration Utility ............................ 13
Live Video ..............................................................17
Setup .....................................................................19
Application .................................................... 39
Add Server .................................................... 40
Add Media ..................................................... 41
Add Event ..................................................... 43
Add Recording ..............................................45
Advanced ............................................................... 48
Maintenance .......................................................... 52
Status ....................................................................55
Appendix ....................................................................58
DI/DO Input Specications ....................................58
Technical Specications ........................................ 59
Technical Specications ........................................ 60
2D-Link DCS-2210/2230 User Manual
Preface
D-Link reserves the right to revise this publication and to make changes in the contents hereof without obligation to notify any person or organization of such revisions or changes.
Manual Revisions
Revision Date Description
1.0 June 14, 2011 DCS-2210/2230 Revision A1 with rmware version 1.00
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2011 D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc.
3D-Link DCS-2210/2230 User Manual

Product OverviewProduct Overview

 DCS-2210 or DCS-2230 Network Camera  CAT5 Ethernet cable  Power adapter  Camera stand  CD-ROM with User Manual and software  Quick Installation Guide
If any of the above items are missing, please contact your reseller.

Package Contents

System Requirements

 Existing 10/100 Ethernet-based network or 802.11n/g wireless network(Wireless for DCS-2230 )  Computer with Windows 7/Vista/XP for Camera Setup Wizard  Internet Explorer, Firefox, Opera, or other web browser for web interface (Internet Explorer
recommended for full functionality)
If any of the above items are missing, please contact your reseller.
4D-Link DCS-2210/2230 User Manual

Hardware Overview

Hardware Overview
Status LED
Indicates the camera's current status
ICR Sensor
The IR-Cut Removable sensor judges lighting conditions and switches from color to infrared accordingly
Hardware Overview

Front

Camera Lens
Records video of the surrounding area
Microphone
Records audio from the surrounding area
Infrared LED
Used to illuminate the camera's eld of view at night
PIR
Passive Infrared sensor for motion detect
WPS LED(DCS-2230 only)
WPS status indicator LED
Speaker
Audio output
5D-Link DCS-2210/2230 User Manual
Hardware Overview
Ethernet
RJ45 connector for Ethernet (DCS-2210 support PoE which can also be used to power the camera)
WPS Button (DCS-2230 only)
Press this button, then press the WPS button on your router to set up a wireless connection automatically

Rear

Power Connector
Connects to the included DC 5 V power adapter
I/O Connector
I/O connectors for external devices
Adjustment Ring
Tighten or loosen the adjustment ring to adjust the camera's position
Reset
Press and hold this button for 10 seconds to reset the camera
Base Holes
Can be used with cable ties to attach camera to a surface
6D-Link DCS-2210/2230 User Manual
Hardware Overview

Side

Micro SD Card slot
Local storage for storing recorded image and video
7D-Link DCS-2210/2230 User Manual
Hardware Overview
Conguration with Wizard
Insert the DCS-2210/DCS-2230 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive.
Click Installation Wizard to begin the installation.
After clicking Setup Wizard, the window on the right will open.
Click Next to continue.
8D-Link DCS-2210/2230 User Manual
Hardware Overview
Click Yes to accept the License Agreement.
To start the installation process, click Next.
Note: The installation may take several minutes to nish.
9D-Link DCS-2210/2230 User Manual
Hardware Overview
Click Finish to complete the installation.
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu.
Start > D-Link > Setup Wizard SE
10D-Link DCS-2210/2230 User Manual
Hardware Overview
The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If you have a DHCP server on your network, a valid IP Address will be displayed. If your network does not use a DHCP server, the network camera's default static IP address 192.168.0.20 will be displayed.
Click the Wizard button to continue.
Enter the Admin ID and password. When logging in for the rst time, the default Admin ID is admin with the password left blank.
Click Next, to proceed to the next page.
11D-Link DCS-2210/2230 User Manual
Hardware Overview
Select DHCP if your camera obtains an IP address automatically when it boots up. Select static IP if the camera will use the same IP address each time it is started.
Click Next, to proceed to the next page.
Take a moment to conrm your settings and click Restart.
12D-Link DCS-2210/2230 User Manual
Conguration
Conguration
Web-based Conguration Utility
This section explains how to congure your new D-Link Network Camera using the Web-based Conguration Utility.
Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu.
Start > D-Link > Setup Wizard SE
Select the camera and click the button labeled "Link" to access the web conguration.
The Setup Wizard will automatically open your web browser to the IP address of the camera.
Alternatively, you may manually open a browser and enter the IP address of the camera: 192.168.0.20
13D-Link DCS-2210/2230 User Manual
Conguration
Enter admin as the default username and leave the password blank. Click OK to continue.
This section shows your camera’s live video. You can select your video prole and view or operate the camera. For additional information about web conguration, please refer to the user manual included on the CD-ROM or the D-Link website.
14D-Link DCS-2210/2230 User Manual
Conguration

D-ViewCam Setup Wizard

D-ViewCam software is included for the administrator to manage multiple D-Link IP cameras remotely. You may use the software to congure all the advanced settings for your cameras. D-ViewCam is a comprehensive management tool for IP surveillance.
Insert the CD-ROM into the CD-ROM drive. Click "Install D-ViewCam Software" from menu, and select "D-ViewCam" to install the VMS software.
Follow the Installation Wizard to install D-ViewCam.
15D-Link DCS-2210/2230 User Manual
Conguration
Click Finish to complete the installation.
To start D-ViewCam, select Start > All Programs > D-Link D-ViewCam > Main Console.
For more detail operation of using D-ViewCam software, please refer to D-ViewCam Manual.
16D-Link DCS-2210/2230 User Manual
Conguration

Live Video

This section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your language using the drop-down menu on the left side of the screen.
You can zoom in and out on the live video image using your mouse. Right-click to zoom out or left-click to zoom in on the image.
Digital Input Indicator
Motion Trigger Indicator
Recording Indicator
Video Prole 1
Video Prole 2
Video Prole 3
Full screen mode
Taking a Snapshot
Recording a Video Clip
Set a Storage Folder
This indicator will change color when a digital input signal is detected.
This indicator will change color when a trigger event occurs.
Note: The video motion feature for your camera must be enabled.
When a recording is in progress, this indicator will change color.
Listen/Stop Listening
Talk/Stop Talking
Start/Stop Digital Output
Control Pad
This control pad can be used to pan, tilt, and zoom within the camera's predened view area, if one has been dened.
17D-Link DCS-2210/2230 User Manual
Conguration
Go To:
(Preset List)
SD Status:
IO Status:
PTZ Control:
ePTZ Speed:
Global View:
Language:
If any presets have been dened, selecting a preset from this list will display it.
This option displays the status of the SD card. If no SD card has been inserted, this screen will display the message "Card Invalid."
This option displays the status of your I/O device if a device has been connected.
This camera uses electronic pan/tilt/zoom (ePTZ) to select and view areas of interest in the eld of view. Please see page 32 for information about setting the frame size and view window area.
You may select a value between 0 and 64. 0 is the slowest and 64 is the fastest.
This window indicates the total eld of view (FOV) of the camera. The red box indicates the visible region of interest (ROI).
You may select the interface language using this menu.
Auto Pan Starts the automatic
panning function. The ROI will pan from back and forth within the FOV
Stop Stops the camera
ePTZ motion
Preset Path Starts the camera's
motion along the predened path
18D-Link DCS-2210/2230 User Manual
Conguration

Setup

Wizard

To congure your Network Camera, click Internet Connection Setup Wizard. Alternatively, you may click Manual Internet Connection Setup to manually congure your Network Camera and
skip to page 22.
To quickly congure your Network Camera’s motion detection settings, click Motion Detection Setup Wizard. If you want to enter your settings without running the wizard, click Manual Motion
Detection Setup and skip to page 27.

Internet Connection Setup Wizard

This wizard will guide you through a step-by-step process to congure your new D-Link Camera and connect the camera to the internet. Click Next to continue.
Note: Select DHCP if you are unsure of which settings to choose.
Click Next to continue.
19D-Link DCS-2210/2230 User Manual
Loading...
+ 42 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use