CITIZEN SDC-810 User Manual [fr, it, en, de]
SDC-810/SDC-812
HDBD805A114 XXX
* POWER SUPPLY
CITIZEN model SDC-810/812 is a dual-powered (high power solar
+ back-up battery) calculator operative under any lighting
conditions.
-Auto power-off functionThe calculator switches the power off automatically if there has
been no key entry for about 10 minutes.
-Battery changeIf the back-up battery needs to be changed, open the lower cabinet to
remove the old battery and insert a new battery in the indicated polarity.
* KEY INDEX
ON
[
] : Power on / Clear Entry / Clear key.
CEΘC
[o] : Right Shift key. [+/–] : ±Sign change key.
[M+] : Memory plus key. [M–] : Memory minus key.
[MRC] : Memory recall / clear key.
The Signs Of The Display Mean The Following:
MΚMemory. –ΚMinus ( or negative ).
EΚOverflow-error.
* OPERATION EXAMPLES
1.Calculation Examples
Before performing each calculation, press the
Example Key operation Display
2 x 3 = 6 2 [x] 3 [=]
7 x 9 = 63 7 [y] [x] 9 [=] 63.
300 x 27% = 81 300 [x] 27 [%] 81.
11.2
x 100% = 20%
56
300+(300 x 40%)=420 300 [+] 40 [%] 420.
300–(300 x 40%)=180 300 [–] 40 [%] 180.
1400 x 12% = 168 1400 [x] 12 [%] 168.
6 + 4 + 7.5 = 17.5
5 x 3 y 0.2 = 75 5 [x] 3 [y] 0.2 [=] 75.
8 y 4 x 3.7 + 9 =16.4 8 [y] 4 [x] 3.7 [+] 9 [=] 16.4
4
5
= 625 5 [x] [=] [=] [=] 625.
1 / 2 = 0.5 2 [÷] [=] 0.5
= 0.0 625
10) 3 x (21
2.Memory Calculation
(12 x 4) – (20 y 2) = 38
11.2 [y] 56 [%] 20.
6 [+] 4 [+] 7.5 [=] 17.5
2 [x] 3 [+] 10 [y] [=] 0.0625
ON
CEΘC
]
ON
CEΘC
[MRC] [MRC] [
12 [x] 4 [M+] 20 [y] 2 [M–]
[MRC]
[MRC] [
[
ON
CEΘC
]
English
English
English
]
key two times
M
M
6.
0.
10.
38.
0.
3.Constant Calculation
2 + 4 = 6 2 [+] 4 [=] 6.
6 + 4
= 10 6 [=] 10.
7 - 5
= 2 7 [-] 5 [=] 2.
= 10 15 [=] 10.
15 - 5
3 x
4 = 12 3 [x] 4 [=] 12.
3 x
6 = 18 6 [=] 18.
= 2 10 [y] 5 [=] 2.
10 y 5
15 y 5
= 3 15 [=] 3.
4.Overflow Error Clear (SDC-812)
123456789012 x 100
= 12345678901200
123456789012 123’456’789’012.
[x] 100 [=]
ON
ON
[
] [
CEΘC
CEΘC
E
12.3456789012
]
0.
.
File name: SDC-810BN_812BN_English_20100106
version : 10/06/07
* ALIMENTACIÓN Español
Modeio CITIZEN SDC-8 10/8 12 funciona gracias a un mecanismo de
doble carg (luz solar y bateria de apoyo), lo cual le permite operar bajo
cualquier condicion de iluminación.
-Función de desconexión automáticaLa calculadora se apaga automaticamente si no ha sido utilizada
durante 10 minutos aproximadamente.
-Reemplazada de la pilaSi la pila de apoyo necista ser reemplazada, quite los tornillos del
departamento inferior y sustituya la pila gastada por una nueva.
Coloque la pila en su posicion correcta, con la polaridad indicada.
* TECLADO INFOMATIVO Español
ON
[
] : Tecla de encendido / Tecla de borrar entrada / Borrar todo
CEΘC
[o] : Tecla de anular el digito ultimado.
[+/–] : ±Tecla de cambio de signo.
[M+] : Tecla de memoria positiva.
[M–] : Tecla de memoria negativa.
[MRC] : Tecla de borrar / recuperar lo almacenado en la memoria.
Los signos del visor significan lo siguiente:
MΚMemória. –ΚMenos ( o negativo ).
EΚError de desbordamiento.
* EJEMPLO DE FUNCIONES Español
1.Ejmplos de calculación
Antes de efectuar cada cálculo, presionar 2 veces la tecla de [
Ejemplo
2 x 3 = 6 2 [x ] 3 [=]
7 x 9 = 63 7 [y] [x] 9 [=] 63.
300 x 27% = 81 300 [x] 27 [%] 81.
11.2
x 100% = 20%
56
300+(300 x 40%)=420 300 [+] 40 [%] 420.
300–(300 x 40%)=180 300 [–] 40 [%] 180.
1400 x 12% = 168 1400 [x] 12 [%] 168.
6 + 4 + 7.5 = 17.5
5 x 3 y 0.2 = 75 5 [x] 3 [y] 0.2 [=] 75.
8 y 4 x 3.7 + 9 =16.4 8 [y] 4 [x] 3.7 [+] 9 [=] 16.4
4
5
= 625 5 [x] [=] [=] [=] 625.
1 / 2 = 0.5 2 [÷] [=] 0.5
= 0.0 625
10) 3 x (21
2. Cálculo de memoria
(12 x 4) – (20 y 2) = 38
OperaciΆn con la tecla
11.2 [y] 56 [%] 20.
6 [+] 4 [+] 7.5 [=] 17.5
2 [x] 3 [+] 10 [y] [=] 0.0625
ON
[MRC] [MRC] [
12 [x] 4 [M+] 20 [y] 2 [M–]
[MRC]
[MRC] [
CEΘC
]
CEΘC
M
ON
M
]
3. Constante
2 + 4 = 6 2 [+] 4 [=] 6.
6 + 4
= 10 6 [=] 10.
= 2 7 [–] 5 [=] 2.
7 – 5
15 – 5
= 10 15 [=] 10.
3 x
4 = 12 3 [x] 4 [=] 12.
6 = 18 6 [=] 18.
3 x
10 y 5
= 2 10 [y] 5 [=] 2.
15 y 5
= 3 15 [=] 3.
4. Limpiar para desbordamiento y error (SDC-812)
123456789012 x 100
= 12345678901200
123456789012 123’456’789’012.
[x] 100 [=]
ON
[
] [
CEΘC
CEΘC
E
ON
]
ON
CEΘC
Visualizacón
12.3456789012
6.
0.
10.
38.
0.
0.
].
File name: SDC-810BN_812BN_Spanish_20100106
version : 10/06/07
* FONT DE ALIMENTACÃO
CITIZEN model SDC-810/812 tem dupla fonte de alimentação de
energia (energia solar e bateria de reserva), permitindo operar sob
qu quer condição de iluminação.
-Função Auto power-off(desligamento automático)A calculadora desliga autom aticamente, caso nenhum a tecla seja
utilizada por aproximadamente 10 minutos.
-Troca de bateriaSe for necessário trocar a bateria de reserva, remova a bateria
usada, abrindo a tampa inferior e coloque uma bateria nova,
observando a polaridade indicada.
* CHAVE EXPLICACÃO
ON
[
] : Tecla para Ligar / Tecla para Limpar Entrada / Limpar
CEΘC
[o] : Tecla de mudança de digito.
[+/–] : Tecla para mudar Sinal ±.
[M+] : Tecla de mais da memoria.
[M–] : Tecla de menos da memoria.
[MRC] : Tecla para Chamada / Limpar de Memória.
Os Sinais do Visor Significam o Seguinte:
MΚMemória. –ΚMenos ( ou negativo ).
EΚErro por transbordamento.
* EXEMPLOS DE OPERACÃO
1. Exemplo de calculos
Antes de executar cada cálculo, pressione a tecla [
Exemplo Operação com a tecla
2 x 3 = 6 2 [x] 3 [=]
7 x 9 = 63 7 [y] [x] 9 [=] 63.
300 x 27% = 81 300 [x] 27 [%] 81.
11.2
x 100% = 20%
56
300+(300 x 40%)=420 300 [+] 40 [%] 420.
300–(300 x 40%)=180 300 [–] 40 [%] 180.
1400 x 12% = 168 1400 [x] 12 [%] 168.
6 + 4 + 7.5 = 17.5
5 x 3 y 0.2 = 75 5 [x ] 3 [y] 0.2 [=] 75.
8 y 4 x 3.7 + 9 =16.4 8 [y] 4 [x] 3.7 [+] 9 [=] 16.4
4
5
= 625 5 [x] [=] [=] [=] 625.
1 / 2 = 0.5 2 [÷] [=] 0.5
= 0.0 625
10) 3 x (21
2. Memoria
(12 x 4) – (20 y 2) = 38
3. Constante
2 + 4 = 6 2 [+] 4 [=] 6.
= 10 6 [=] 10.
6 + 4
7 – 5
= 2 7 [–] 5 [=] 2.
15 – 5
= 10 15 [=] 10.
4 = 12 3 [x] 4 [=] 12.
3 x
3 x
6 = 18 6 [=] 18.
10 y 5
= 2 10 [y] 5 [=] 2.
15 y 5
= 3 15 [=] 3.
4. Erro por excesso (SDC-812)
123456789012 x 100
= 12345678901200
11.2 [y] 56 [%] 20.
6 [+] 4 [+] 7.5 [=] 17.5
2 [x] 3 [+] 10 [y] [=] 0.06 25
[MRC] [MRC] [
12 [x] 4 [M+] 20 [y] 2 [M–]
[MRC]
[MRC] [
123456789012 123’456’789’012.
[x] 100 [=]
[
CEΘC
CEΘC
ON
]
CEΘC
ON
ON
] [
]
CEΘC
Português
Português
Português
ON
] 2 vezes.
CEΘC
Visualização
6.
ON
]
M
M
E
10.
38.
12.3456789012
0.
0.
0.
File name: SDC-810BN_812BN_Portuguese_20100106
version : 10/06/07
* STROMVERSORGUNG Deutsch
CITIZEN model SDC-810/812 wird durch 2 voneinander unabhängigen
Energiequellen versorgt (Entweder durch eine sehr starke solar-zelle
oder durch eine batterie). Der rechner arbeitet selbst unter schlechtesten
lichtbedingungen.
-Automatische AusschaltungDer rechner schaltet sich automatisch ab, wenn diesen 10 minuten
nicht mehr benutzen.
-BatterlewechselSoltte die batterie gewechselt werden, entfernen Sie bitte die
Schrauben vom unterteil und tauschen die alte gegen eine neue
batterie aus. Beachten Sie, daß die batterie richtig, entsprechend
der polarität, eingelegt wird.
* ERKLARUNGEN VON SCHLUSSEL Deutsch
ON
[
] : An / Eingabe löschen / Clear Taste
CEΘC
[o] : Rechts schub taste. [+/–] : ±Vorzeicheneingabetaste.
[M+] : Speicher Plus taste. [M–] : Speicher Minus taste.
[MRC] : Memory Wiederaufruf / Löschen.
Die Zeichen in der Anzeige haben die folgende Bedeutung:
MΚSpeicher.
EΚÜberflussfehler.
–ΚMinus ( oder negative ).
* BEISPIEL FÜR DEN bETRIEB Deutsch
1.Berechnungsbeispiele
Drücken Sie vor dem Ausführen einer Berechnung jeweils die
Beispiel Tastenkombination Anzeige
2 x 3 = 6 2 [x] 3 [=]
7 x 9 = 63 7 [y] [x] 9 [=] 63.
300 x 27% = 81 300 [x] 27 [%] 81.
11.2
x 100% = 20%
56
300+(300 x 40%)=420 300 [+] 40 [%] 420.
300–(300 x 40%)=180 300 [–] 40 [%] 180.
1400 x 12% = 168 1400 [x] 12 [%] 168.
6 + 4 + 7.5 = 17.5
5 x 3 y 0.2 = 75 5 [x ] 3 [y] 0.2 [=] 75.
8 y 4 x 3.7 + 9 =16.4 8 [y] 4 [x] 3.7 [+] 9 [=] 16.4
4
5
= 625 5 [x] [=] [=] [=] 625.
1 / 2 = 0.5 2 [÷] [=] 0.5
= 0.0 625
10) 3 x (21
11.2 [y] 56 [%] 20.
6 [+] 4 [+] 7.5 [=] 17.5
2 [x] 3 [+] 10 [y] [=] 0.0625
2. Speicher
(12 x 4) – (20 y 2) = 38
[MRC] [MRC] [
12 [x] 4 [M+] 20 [y] 2 [M–]
[MRC]
[MRC] [
ON
CEΘC
CEΘC
]
3. Konstant
2 + 4 = 6 2 [+] 4 [=] 6.
6 + 4
= 10 6 [=] 10.
= 2 7 [–] 5 [=] 2.
7 – 5
15 – 5
= 10 15 [=] 10.
3 x
4 = 12 3 [x] 4 [=] 12.
6 = 18 6 [=] 18.
3 x
10 y 5
= 2 10 [y] 5 [=] 2.
15 y 5
= 3 15 [=] 3.
4. Korrektur und überlauf-fehleer (SDC-812)
123456789012 x 100
= 12345678901200
123456789012 123’456’789’012.
[x] 100 [=]
ON
ON
[
] [
CEΘC
]
CEΘC
ON
Tas te 2 m al.
[
]
CEΘC
6.
ON
]
M
M
E
0.
10.
38.
0.
12.3456789012
0.
File name: SDC-810BN_812BN_German_20100106 vision :
10/06/07
Loading...