Communication Systems | LBB 1946/00 Plena 6-zone Call Station
LBB 1946/00 Plena 6-zone Call Station
The Plena 6-zone call station is a stylish high-quality call station with a stable metal base design, a flexible microphone stem and a unidirectional condenser microphone. It is intended for making calls to selected zones (1 to 6 and all-call) in a PA system built around the LBB 1925/00 system pre-amplifier. In addition to tabletop use, the special design enables the unit to be neatly flush-mounted in desk tops.
This call station features selectable gain, a selectable speech filter and a limiter for improved intelligibility, even if the speaker moves in front of the microphone. Because the call station provides a balanced line level output, it can be positioned up to 100 m away from the amplifier, using CAT-5 extension cables.
Dipswitches on the bottom of the call station can be used to select different preand post-call chimes, as well as the priority level. Selected zones are indicated with LEDs on the call station, and an additional bi-color LED gives visible feedback on the active state of the microphone and the system. Green indicates microphone on or chime active (flashing LED); amber indicates that the system is occupied by a source with a higher priority or operation error (flashing LED).
Stylish 6-zone call station, intended for LBB 1925/00 system pre-amplifier
Unidirectional condenser microphone on flexible stem
Six zone selection keys, all-call key and momentary PTT-key for calls
Selectable gain, speech filter and limiter for improved intelligibility
Selectable priority levels and different preand postcall chimes
LED indications for zone selection, system occupation and call station status
Quantity |
Component |
1 |
LBB 1946/00 Plena Call Station |
1 |
5m cable terminated with a lockable 8-pin DIN connector |
1Loopthrough 8-pin DIN socket to add an additional call station LBB 1941/00 or LBB 1946/00
www.boschsecurity.com