Communications Systems | LB2 Premium-sound Cabinet Loudspeaker Range
LB2 Premium-sound Cabinet Loudspeaker
Range
www.boschsecurity.com
u High-fidelity music and speech reproduction
u Selectable 8 ohm, 70 V and 100 V inputs
u Compact yet robust ABS enclosure
u Supplied with adjustable mounting bracket
u Water and dust protected IP65
The LB2-UCxx-x1Premium sound cabinet loudspeakers are intended for clear reproduction of speech, foreground and background music to be used in general indoor and outdoor applications. The Premium sound cabinet loudspeaker range consists of a 15 W and 30 W model, available in a light or dark color. The loudspeakers have selectable 8 ohm, 70 V and 100 V inputs.
The ABS cabinets are fitted with aluminum front grilles and standard supplied with aluminum bracket.
Typical applications are: theme bars, music restaurants, theme parks, retail outlets, audio visual, boardrooms and offices, exhibition areas, showrooms, fitness centre’s and presentation environments.
Certifications and approvals
Quality assurance
All Bosch loudspeakers are designed to withstand operating at their rated power for 100 hours in accordance with IEC 268-5 Power Handling Capacity (PHC) standards. Bosch has also developed the Simulated Acoustical Feedback Exposure (SAFE) test to demonstrate that they can withstand two times
their rated power for short durations. This ensures improved reliability under extreme conditions, leading to higher customer satisfaction, longer operating life, and lessons the chance of failure or performance deterioration.
Safety |
acc. to EN 60065 |
|
|
Water and dust |
acc. to EN 60529 Water Protection |
protection |
|
|
|
Self extinguishing |
acc. to UL94 V 0 |
|
|
|
|
Chlorine resistant |
acc. to IEC60068-2-42 |
|
|
Corrosion resistant |
acc. to IEC60068 2-52 |
|
|
Salt mist |
acc. to IEC60068 2-11 |
|
|
Installation/configuration notes
The cabinets include a built in transformer that offers a selection of nominal full power, half power, quarter power or eight power radiation (i.e. in 3 dB steps) for 70 V, 100 V or 8 Ohm bypass.
2 | LB2 Premium-sound Cabinet Loudspeaker Range
Selection is done by a convenient switch on the rear enclosure.
A two meter long twin core loudspeaker cable (in matching color with the cabinet) is connected to the loudspeaker. The core ends are stripped ready for use. The mounting brackets are fitted with anti theft torx screws, covered with plastic covers in matching color of the cabinets.
The cabinets can be mounted horizontally to allow the loudspeaker to be directed up or down, or vertically to allow left and right rotation by means of a steel U- shaped wall bracket (standard supplied).
The rotatable logo can be easily adjusted to match the mounting orientation.
Rear view LB2 UC15 x1 / LB2 UC30 x1
LB2 UC15-D1/L1
205 |
[8.1] |
1
136
[5.4]
Front and top view mm (in). (1) Rotatable logo.
165.9
[6.5]
1
208 |
[8.2] |
117.8
[4.6]
Side view mm (in). (1) Power tapping switch.
3 | LB2 Premium-sound Cabinet Loudspeaker Range
10 [ 0.4]
12.5 [ 0.5]
10 [Ø0.4]
Rear view mm (in).
80 [3.1]
217 |
[8.5] |
80 [3.1]
F |
8 OHMS |
|
|
E |
1.9W |
|
|
D |
3.75W |
1.9W |
2.2UF |
|
|
|
|
C |
7.5W |
3.75W |
|
B |
15W |
7.5W |
|
A |
|
15W |
|
|
100V |
70.7V |
|
|
|
0 |
|
F' |
|
C |
|
E' |
|
|
|
D' |
|
|
|
C' |
|
|
|
B' |
|
|
|
A' |
|
|
|
LB2 UC15 x1 Circuit diagram |
|
LB2 UC15 x1 Polar diagram horizontal (low frequency). Normalized at 0 degrees axis.
LB2 UC15 x1 Frequency response
LB2 UC15 x1 Polar diagram horizontal (high frequency). Normalized at 0 degrees axis.