LTC 0465-61
Video | LTC 0465 Series Dinion Day/Night Cameras
LTC 0465 Series Dinion Day/Night Cameras
www.boschsecurity.com
u 1/3 inch format CCD sensor
u 540 TVL resolution
u Mechanically switching IR filter for IR sensitivity at
night
u Bilinx Communication for remote set-up and control
u Auto-detection of lens type with LensWizard
The Dinion Day/Night Camera is a professional
surveillance day/night camera that incorporates 10-bit
digital signal processing. The camera is easy to install
and ready to use, offering good quality picture
performance.
All Dinion cameras are delivered ready to operate.
Simply attach and focus the lens, then connect power.
The camera automatically detects the lens type. The
Lens Wizard ensures accurate back focusing for sharp
pictures at all times. The camera parameters can be
individually set using the control buttons on the side
of the camera and On-screen Display (OSD).
Functions
Day/Night Mode
The LTC 0465 has enhanced night or low-light viewing
compared to normal color cameras. The IR filter can
switch from color to monochrome automatically to
improve scenes when light levels have been reduced
or to make use of infrared light. An internal through-
the-lens IR detector enhances the monochrome mode
stability as it prevents reverting to the color mode
when IR illumination is dominant.
Auto Black
The automatic black level feature enhances contrast by
compensating for reduced contrast (i.e. glare, fog,
mist).
Bilinx Technology
Bilinx is a bi-directional communication capability
embedded in the video signal of all Bosch Dinion
cameras. Technicians can check status, change camera
settings, and even update firmware from virtually
anywhere along the video cable. Bilinx reduces service
and installation time, provides for more accurate set-
up and adjustment, and improves overall performance.
In addition, Bilinx uses the standard video cable to
transmit alarm and status messages, providing
superior performance without additional installation
steps.
Lens Wizard
The Lens Wizard automatically detects the lens type
and helps focus the lens at the maximum opening,
thus ensuring proper focus maintenance throughout
the 24-hour cycle. No special tools or filters are
required.
Typical Applications
• Museums and art galleries
• Shopping centers
• Offices
• Schools, colleges, and universities
• Petrol/gas stations
Certifications and approvals
Electro Magnetic Compatibility
Emission EN55022 class B, FCC class B part 15
Immunity EN50130-4 Alarm Systems, Part 4
Vibration Camera with 500 gr (1.1 lbs) lens according
to IEC60068-2-27
Safety
LTC 0465/11 and LTC 0465/51: EN60065
LTC 0465/21 and LTC 0465/61: UL6500, cUL CAN/CSA E60065-00
Region Certification
Europe CE
USA FCC + UL
Installation/configuration notes
Parts included
Quantit
y
Component
1 LTC 0465 Series Dinion Day\Night Camera
1 Spare male 4 – pin lens connector (lens not included)
1 Installation and Operation manual (multi-lingual)
Technical specifications
Electrical
Model No. Rated Voltage
LTC 0465/11 12 – 28 VAC 45 - 65 Hz
11 – 36 VDC
LTC 0465/21 12 – 28 VAC 45 - 65 Hz
11 – 36 VDC
LTC 0465/51 110 – 230 VAC 45 - 65 Hz
LTC 0465/61 110 – 230 VAC 45 - 65 Hz
Power Consumption 4 W
CCD Type 1/3-inch interline
Active Pixels
PAL Model: 752 x 582
NTSC Model 768 x 494
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Full video
(100 IRE)
Usable picture
(50 IRE)
Usable picture
(30 IRE)
Color 2.6 lx
(0.26 fc)
0.65 lx
(0.065 fc)
0.30 lx
(0.03 fc)
Mono 1.04 lx
(0.104 fc
)
0.26 lx
(0.026 fc)
0.012 lx
(0.0012 fc)
Horizontal Resolution 540 TVL
Day/Night Color, Mono, Auto
Dynamic range 60 db (10-bit image processing)
Signal-to-Noise Ratio > 50 dB
BLC On (center window weighted), Off
Gain 20 dB max.
White Balance ATW (2500 - 10000 K), AWB hold, Manual
WB selectable
Shutter Auto (1/60 (1/50) to 1/150000), fixed,
flickerless
Auto Black Automatic, Continuous, Off
Synchronization Internal, Line Lock selectable
Lens Mount CS (maximum lens protrusion 5 mm,
0.2 in), C-mount compatible (with optional
adapter ring)
Lens Types Manual, DC iris and Video iris auto-detect
with override
DC-iris drive: max. 50 mA continuous
Video-iris: 11.5 ± 0.5 VDC, max 50 mA
continuous
Remote Control Bilinx coaxial communication
Camera ID 16 character editable string, position
selectable
Alarm Input (TTL) +5 V nominal, +40 VDC max
Alarm Output Bilinx or monochrome
Alarm Output Relay Max. 30 VAC or +40 VDC, Max 0,5 A
continuous, 10 VA
Video Output 1 Vpp, 75 Ohm
2 | LTC 0465 Series Dinion Day/Night Cameras
Loading...