Lift-Off Floors More
USER'S GUIDE
10Z3 SERIES
2
Thank you
3
Safety instructions
4
Product view
5
Assembly
5-6
Operations
6-9
Maintenance and care
9-10
Troubleshooting
10
Replacement parts
11
Warranty
12
Consumer services
Thanks for buying a BISSELL Lift-Off Floors & More Vacuum
We’re glad you purchased a BISSELL vacuum. Everything we know
about floor care went into the design and construction of this
complete, high-tech home cleaning system.
Your BISSELL vacuum is well made, and we back it with a limited
two year warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Services department, so, should you ever have
a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today,
BISSELL is a global leader in the design, manufacture, and service
of high quality homecare products like your BISSELL vacuum.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman, President & CEO
2
www.bissell.com
IMPORTANT SAFETY INSTRUCTIONS
■
Do not allow to be used as a toy.
When using an electrical
basic precautions should be observed,
including the following:
appliance,
READ ALL INSTRUCTIONS BEFORE
USING YOUR BISSELL VACUUM.
WARNING
To reduce the risk
of fire, electric shock,
or injury:
■
Store indoors.
■
Do not expose to rain.
■
Do not immerse.
■
Do not handle with wet hands.
■
Do not use if vacuum cleaner has been
dropped, damaged, left outdoors or
dropped into water, have it repaired at an
Authorized Service Center.
■
Do not use with damaged cord or plug on
the charger.
■
Do not unplug charger by pulling on cord.
■
Do not damage the charger cord. Never
carry or pull the charger unit by the cord,
use cord as a handle, close door on cord,
or pull cord around sharp edges or corners.
Keep cord away from heated surfaces.
■
Do not use an extension cord. Charger
should plug directly into electrical outlet.
■
Do not put any object into appliance
openings, use with blocked opening, or
restrict air flow.
■
Do not use with any opening blocked.
■
Do not expose hair, loose clothing, fingers or
body parts to openings or moving parts.
■
Do not pick up hot, burning or smoking
objects such as cigarettes, matches or hot
ashes.
■
Do not pick up flammable or combustible
materials (lighter fluid, petrol, kerosene, etc.)
or use in the presence of explosive liquids
or vapours.
■
Do not use appliance in an enclosed space
filled with vapors given off by oil base
paint, paint thinner, some moth proofing
substances, flammable dust, or other
explosive or toxic vapours.
■
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, petrol, etc.)
■
Not intended for use by young children or
infirm persons without supervision.
■
Young children should be supervised
to ensure that they do not play with the
appliance.
■
Do not use for any purpose other than
described in this User’s Guide.
■
Use only manufacturer’s recommended
attachments – use of attachments not
provided or sold by BISSELL may cause fire,
electric shock or injury.
■
Use only the charger supplied by BISSELL
(packaged with your appliance) to recharge
your BISSELL Vacuum.
■
Use charger unit only in standard
electrical outlet (220-240V~50/60 Hz.).
■
Keep openings free of dust, lint, hair, etc.
■
Unplug charger unit from outlet before
maintenance or cleaning.
■
Unplug by grasping the plug, not the cord.
■
Be extra careful when cleaning stairs.
■
Turn off all controls when finished cleaning.
■
Do not charge the unit outdoors.
Your BISSELL Hand Vacuum contains
rechargeable nickel metal hydride (NiMH)
batteries. Do not incinerate batteries or
they can explode when exposed to high
temperatures.
Battery cell leaks can occur under extreme
conditions. If battery cell contents comes in
contact with the skin:
■
Flush immediately with warm water for
at least 15 minutes, then wash with soap
and water.
If battery cell contents comes in contact
with the eyes:
■
Flush immediately with clean water
for a minimum of 15 minutes.
■
Seek medical attention.
SAVE THESE
INSTRUCTIONS
FOR FUTURE USE.
THIS MODEL IS FOR HOUSEHOLD USE
ONLY.
www.bissell.com
3
Product view
Power/Brush roll
On/Off
2-Way Folding
Handle Release
Hand Vacuum
Release
Charging Adapter Plug
CAUTION:
Do not plug in your vacuum
cleaner until you are familiar with all instructions and
operating procedures.
4
www.bissell.com
Dirt Cup Release
Filter
Dirt Container
Integrated
Crevice Tool
Detachable
Hand
Vacuum
Swivel Head
Assembly
No tools are required for assembly;
simply insert foot into body of unit until
you hear a click.
Charging
Before charging, make sure unit is in
the OFF position.
1. Insert the charging adapter plug into the
charging port on the back of the unit.
2. Plug the adapter into the wall outlet. The red
indicator light will illuminate and remain on
when plugged into wall outlet. Charge the
unit completely for 24 hours prior to first use.
Note: The adapter may become warm
during charging – this is normal.
3. When the unit is fully discharged, approx-
imately 16 hours of charging is required
for the battery to regain full capacity.
Operations
Power switch
The power switch is located on the top of
the handle. Settings include:
(O) = OFF
(I) = Suction ON
(BRUSH) = Suction and Brush ON
1.
Using your stick vacuum
1. Push power switch on to desired setting.
2. Easily clean hard floors, low pile carpet,
and area rugs.
3. When finished cleaning, turn power
switch to OFF (O) position.
2-way folding handle
For cleaning under couches, beds and
other hard to reach areas.
1. To release, push button located under
power switch to bend handle forward for
cleaning under furniture.
2. For space saving storage, push button to
bend handle backward.
www.bissell.com
1.
2-Way Folding
Handle Release
5
Operations
Cleaning with the detachable hand vac
1. Remove hand vac by pressing the release
button.
1.
2. Power switch is located under handle and
should be depressed while cleaning is taking place.
3. Easily clean messes on furniture, stairs,
and other hard to reach areas.
4. For hard to reach messes, use the
integrated crevice tool. To access crevice
tool, pull on tab indicated by arrow on
front of hand vac nozzle. Listen for click to
know crevice tool is ready to use.
4.
5. When done cleaning, simply push crevice
tool back into unit.
Maintenance and care
To maintain maximum cleaning performance, the following maintenance steps
must be performed:
2.
Power Switch
5.
Emptying the dirt cup
Dirt cup should be emptied before
debris reaches the FULL line on cup.
1. Turn power OFF (O) and remove hand
vacuum from unit, as directed in step 1
"Cleaning with the detachable hand vac".
2. Hold hand vacuum vertically and depress
the release button to release dirt container.
3. Gently pull dirt container away from the
hand vacuum grip and remove the filter.
Empty dirt into waste container.
4. Replace filter back into the dirt container
and attach dirt container to hand vacuum
until it snaps securely in place.
Cleaning or Replacing the filter
The key to maximum performance is
having a clean filter. Cleaning the filter
after each use will help your vacuum
operate at peak efficiency.
6
www.bissell.com
2. 3.
Operations
Cleaning or Replacing the filter continued
Use only genuine BISSELL replacement filters in your BISSELL vacuum.
To purchase, please call local
BISSELL Consumer Services .
To clean filter:
1.
Turn power OFF (O).
2. Remove the dirt container from the hand
vacuum, as directed in step 1 "Emptying
the dirt cup" on page 6.
3. Remove filter and tap firmly against the
inside of a waste container, removing
any visible dirt.
4. Replace filter back into the dirt container
and attach dirt container to hand
vacuum until it snaps securely in place.
NOTE: After heavy usage, you may
clean the filter by washing it gently
by hand in warm water and mild
dish detergent. Rinse thoroughly
and make certain it is completely
dry before replacing it.
Brush roll and brush roll belt maintenance
3.
4.
The brush roll may accumulate debris
such as strings, hair and fibers. This
type of debris can wrap around the
brush and diminish its ability to clean
effectively.
To remove brush roll for cleaning:
1.
Turn power OFF (O). Remove foot
assembly from unit and turn over to
access the brush roll.
2. Remove three Phillips head screws to
remove the belt cover.
3. To remove brush roll, pull on the brush
near the belt side. Clean off hair or
other debris from brush roll.
4. Place cleaned brush roll back into foot
of unit by aligning the non-belt side so
it's seated in the nozzle.
5. Pivot the brush roll so the belt end slides
into the slot in the nozzle.
6. Replace the belt cover and secure with
three screws. Attach foot assembly
on unit.
www.bissell.com
2.
3
7
Maintenance and care
Brush roll and brush roll belt maintenance continued
Brush roll reset:
If larger debris becomes lodged in the
foot of the unit and the brush roll shuts
off, turn the unit off and remove the
obstruction. Wait approximately 15 seconds for the motor to cool down before
turning back on. Brush will function
again after allowing time to cool down.
Brush roll belt replacement:
If the brush roll belt should break,
please call local BISSELL Consumer
Services to purchase replacement belt.
Replacement instructions:
1.
Turn power OFF (O). Remove foot
assembly from unit and turn over to access
the brush roll belt.
2. Remove three Phillips head screws to
remove the belt cover.
3. Locate broken belt.
4. Replace belt by sliding the belt over the
motor pully and then sliding brush in.
Alighn the belt on the groove of the brush
roll.
5. Place brush roll back into foot of unit.
6. Replace the belt cover and secure with
three screws.
7. Rotate brush manually to properly seat
belt.
8. Attach foot assembly on unit.
Disposal of batteries
If your Lift-Off Floors & More is to be
disposed of, the batteries should be
removed and disposed of properly.
1. IMPORTANT: Unplug charger.
Remove from charging base and fully
|discharge hand vacuum.
2. Remove dirt container from handle.
3. Remove (5) Phillips head screws on the
handle and cover.
2.
4 & 5.
WARNING:
This product contains a
rechargeable nickel metal
hydride battery (sometimes
referred to as a “NiMH”
battery) pack. The average life of
a NiMH battery is 5 to 7 years,
depending on frequency of use.
Proper removal and disposal of
NiMH batteries is required.
3.
8
www.bissell.com
5 screws
Loading...