USER'S GUIDE
53U6, 34T2 SERIES 220-240V
2Thank You
3Safety Instructions
4-5 Product View
6 Assembly
7-14 Operations
15 Maintenance and Care
16-17 Troubleshooting
18 Replacement Parts
18Accessories and Formulas
19Warranty
20Consumer Services
Thanks for buying a BISSELL CleanView® ProHeat®
We’re glad you purchased a BISSELL CleanView® ProHeat®. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
Your BISSELL CleanView® ProHeat® is well made, and we back it with a limited two year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL CleanView® ProHeat®.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman, President & CEO
2
IMPORTANTSAFETYINSTRUCTIONS
When using an electrical appliance, basic precautions should be observed, including the following:
Read all instructions before using your deep cleaner.
Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
WARNING: To
reduce the risk of fire, electric shock, or injury:
■Use indoors only
■Do not immerse; use only on surfaces moistened by cleaning process
■Do not leave machine when it is plugged in
■Do not service machine when it is plugged in
■If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard
■Do not use machine if it has been dropped, damaged, left outdoors or dropped into water
■Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces
■Do not carry the appliance while in use
■Do not unplug by pulling on cord; unplug by grasping plug not the cord
■Do not handle plug or appliance with wet hands
■Do not put any object into appliance openings, use with blocked opening or restrict air flow
■Do not expose hair, loose clothing, fingers or body parts to openings or moving parts
■Do not pick up hot or burning objects
■Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapours
■Do not use appliance in an enclosed space filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours
■Do not operate the appliance unless the belt door is securely assembled in the
location provided
■Remove plug from electrical outlet before cleaning or maintaining the appliance
■Not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety
■Young children should be supervised to ensure that they do not play with the appliance
■Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, petrol, etc.)
■Do not modify the Earthed plug
■Do not use for any purpose other than described in this User’s Guide
■Use only manufacturer’s recommended attachments
■Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage
■Keep openings free of dust, lint, hair, etc.
■Keep appliance on a level surface
■Turn off all controls before unplugging
■Be extra careful when cleaning stairs
■Pay close attention when working around children
SAVE THESE INSTRUCTIONS FOR FUTURE USE
This model is for household use only.
WARNING:
This appliance must be Earthed.
IMPORTANT
FOR OPERATION ON A 220-240 VOLT A.C. 50/60 Hz POWER SUPPLY ONLY.
If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. (Spares may be obtained from your BISSELL supplier). If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a 13 amp socket.
3
w w w . b i s s e l l . c o m
Product view
Heat Indicator
Light/Built-in
Hot Water Heater
Edge Sweep™ Brushes
4
Ergonomically
Designed Handle
Handle Assembly
Heater Switch:
Turn heat on or off as needed
Lower Body Assembly
Integrated Carry Handle
ReadyTools™ Dial
Belt Access Door
Removable Nozzle
DirtLifter™
PowerBrush
w w w . b i s s e l l . c o m
Product view
Cord Clip
Tough Stain Tool
Ready-to-Use
Hose
WARNING:
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner. NonBISSELL cleaning formulas may harm the machine and void the warranty.
Handle Release
Cleaning formula:
Spray Trigger
Quick Release™
Cord Wrap
Hose Secure Latch
Power Cord
2-in-1 Water Tank™
Includes built in formula measuring cup
Power Switch
Large, Easy-To-
Maneuver Wheels
Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning
formulas. Non-BISSELL cleaning formulas may harm the machine and will void the warranty.
1.5 L |
1.5 L |
1.5 L |
1.5 L |
1.5 L |
473 mL |
651 mL |
2X Wash |
2X Wash & |
2X Wash & |
2X Wash |
2X Wash |
2X Hard |
Tough |
& Protect |
Protect Pet |
Protect Fresh |
& Protect |
& Protect |
Floor |
Stain |
Professional |
Stain & Odour |
Fragrance |
Spring Breeze |
Lavender |
Solutions |
Precleaner |
Formula w/ |
Formula w/ |
Formula w/ |
Fragrance |
Fragrance |
#56L9-E |
#0400-E |
Scotchgard™ |
Scotchgard™ |
Scotchgard™ |
Formula w/ |
Formula w/ |
|
|
Protector |
Protector |
Protector |
Scotchgard™ |
Scotchgard™ |
|
|
#81L5-E |
#66W9-E |
#92F4-E |
Protector |
Protector |
|
|
|
|
|
#12W4-E |
#33D2-E |
|
|
Note: Additional BISSELL formula options may be available at your local retailer.
5
w w w . b i s s e l l . c o m
Assembly
Your CleanView® ProHeat® comes in four easy to assemble components:
•Handle assembly
•Upper hose rack
•Lower body assembly
•Lower hose rack
Four Phillips head screws are included, 2 long and 2 short. They can be found taped to the handle assembly.
The only tool you will need to assemble your cleaner is a Phillips head screwdriver.
1.Slide handle assembly onto lower body and secure with two long screws.
2.Attach upper hose rack to back of handle assembly by pushing into open slots and sliding down until it snaps into place.
3.Attach lower hose rack by sliding in place on lower body assembly and securing with 2 short screws.
4.Attach Tough Stain tool to end of hose.
5.Wrap flex hose around hose rack and secure it into notched out holder as shown.
6.Keep flex hose locked in place with hose secure latch.
Warning:
Do not plug in your cleaner until you have completely assembled it per the instructions and are familiar with all instructions and operating procedures.
Tip: Deep cleaning carpeting regularly can reduce dust and allergens in your home.
1.
2.
3.
4. 5.
6.
6 |
Hose Secure Latch |
w w w . b i s s e l l . c o m |
Loading...