QUICK START GUIDE
PROHEAT® 
Assembly Instructions
2
1
1
2
WARNING
Refer to the enclosed user guide for complete instructions and important safety notices.
1
2
1.The only tool you will need to assemble your deep cleaner is a Phillips screwdriver.
2.Slide Upper Handle (a.) assembly onto lower body and secure with two long screws. These screws can be found taped to the handle.
3.Attach the Upper Hose Rack (d.) to the back of upper handle by pushing into open slots and sliding down until it snaps into place.
4.Attach Lower Hose Rack (e.) by sliding it in place on the lower body assembly and securing it with two short screws.
5.Attach Tough Stain tool to end of hose. Then wrap flex hose around hose rack and secure it into notched out holder as shown.
PARTS INCLUDED |
a. |
b. |
|
c. |
d. |
|
a. Upper Handle |
e. Lower Hose Rack |
h. Nozzle Clean Out Tool |
|
|
|
|
b. Base |
f. Long Screws (2) |
i. Trial-Size BISSELL Formula |
|
|
|
|
c. 3” Tough Stain Tool |
(taped to Upper Handle) |
|
|
|
|
|
d. Upper Hose Rack |
g. Short Screws (2) |
e. |
f. |
g. |
h. |
i. |
|
(taped to Upper Handle) |
|
|
|
|
|
160-8122 01/16 RevB
Loading...