Bissell 17N4 User Manual

4.5 (2)
Bissell 17N4 User Manual

 

 

 

<![if ! IE]>

<![endif]>PROFESSIONAL PET USER GUIDE

 

 

 

 

 

 

<![if ! IE]>

<![endif]>DEEPCLEAN PROHEAT 2X®

17N4 SERIES COSTCO ITEM# 899110​

Grounding Pin
Grounded Outlets

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER.

When using an electrical appliance, basic precautions should be observed, including the following:

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

»Connect to a properly grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug.

»Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing.

»Use indoors only.

»Do not allow to be used as a toy. Close attention is necessary when used by or near children.

»Do not use for any purpose other than described in this User’s Guide. Use only manufacturer’s recommended attachments.

»Do not use with damaged cord or plug. If appliance is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.

»Always install float before any wet pick-up operation.

»Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

»Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

»Do not handle plug or appliance with wet hands.

»Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.

»Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

»Turn off all controls before plugging or unplugging appliance.

»Use extra care when cleaning on stairs.

»Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.)

or use in areas where they may be present.

»Do not use appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust,

or other explosive or toxic vapors.

»Do not use to pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).

»Do not pick up anything that is burning or smoking, such as

cigarettes, matches, or hot ashes.

»Use only BISSELL cleaning products intended for use with this appliance to prevent internal component damage. See the Cleaning Fluid section of this guide.

»Unplug before connecting TurboBrush Tool.

»Do not immerse. Use only on surfaces moistened by the cleaning process.

»Keep appliance on a level surface.

»Do not carry the appliance while in use.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.

WARNING

Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded.

DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the illustration. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this

appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

www.BISSELL.com

2

Thanks for buying a BISSELL deep cleaner

We’re glad you purchased a BISSELL deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.

Your BISSELL deep cleaner is well made, and we back it with a limited three-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL deep cleaner.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

Chairman & CEO

Safety Instructions . . . . . 2

Product View . . . . . . . .4

Assembly . . . . . . . . . . 5

Operations . . . . . . . . 5-12

Maintenance & Care . . . 13-15

Troubleshooting . . . . . . 16

Replacement Parts . . . . . 17

Accessories . . . . . . . . 18

Warranty . . . . . . . . . 19

Consumer Care . . . . . . 19

Product Registration . . . 20

www.BISSELL.com

3

Product View

1

 

 

2

 

12

 

3

4

 

 

 

 

 

 

 

5

 

 

 

6

 

 

 

13

 

 

 

 

7

 

 

 

14

 

 

 

 

8

 

 

 

 

 

 

11

 

 

9

 

 

 

 

10

 

 

1

 

Spray Trigger

9

Easy To Remove Nozzle

2 Extra Long Power Cord

10

EdgeSweep® Brushes

3

 

Upper Handle

11

Lower Base

4

 

Flex Hose

12

Upper Hose Rack

5

 

Power Switch

13

Lower Hose Rack

6

 

Easy Carry Handle

14

Handle Recline Pedal

7Tank Carry Handle

8Large Capacity 2-in-1 Water Tank

www.BISSELL.com

4

Assembly

Your deep cleaner comes in four easy-to-assemble components:

Upper Handle with Screws (screws taped to handle)

Lower Base Upper Hose Rack Upper Tool Holder

The only thing you will need to assemble your cleaner is a Phillips head screwdriver.

1.Slide upper handle onto lower base.

2.Screw 2 screws into the marked holes.

3.Attach the upper tool holder to the upper handle by snapping the bottom half in first, then snapping in the top half.

4.Place upper hose rack onto back of upper handle, and secure with screw.

5.Snap tools onto the Upper Tool Holder.

6.Wrap power cord and flex hose. Snap hose wand into hose clip on upper hose wrap.

NOTE: Take care to wrap the hose in the right direction in order to make use of the hose clip. Make sure the hose is wrapped beginning from the back of the machine and wrapping toward the front.

Your deep cleaner assembly is now complete!

WARNING

Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures.

1.2.

3.

4a. 4b.

5.6.

Operations

Cleaning fluid

Keep plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL

cleaning solutions may harm the machine and will void the warranty.

WARNING

To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.

 

 

 

 

 

 

 

 

Professional

Pet Stain & Odor

Deep Clean

Allergen Cleansing

DeepClean + Refresh

Stain Pretreat

 

Deep Cleaning

& Protect

 

 

 

 

 

 

Out Cleans

Removes tough pet

Deep cleans carpets

 

Powerful

Pretreat to

 

stains and contains

and protects from

Helps remove pet &

penetrate

Best for

all other

cleaning with a

patented odor

future stains with

pollen allergens

and loosen

 

formulas

refreshing scent

 

removal technology

Scotchgard™ Protector

 

tough stains

 

 

 

 

 

 

 

 

 

 

 

2X Concentrated

X

X

X

X

X

 

Scotchgard™ Protection®

X

X

X

 

 

 

*ONLY BISSELL Protects from future stains with Scotchgard™ Protector

www.BISSELL.com

5

Operations

Before you clean

1.Move furniture to another area if cleaning an entire room (optional).

2.Pick up all loose dirt, debris, and pet hair before deep cleaning. It is recommended that you vacuum the area prior to deep cleaning.

3.Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit.

4.Pretreating (optional) is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hallways.

BISSELL Stain Pretreat

a. Spray the BISSELL Stain Pretreat formula onto heavy traffic areas, soiled areas, or stains.

b. Allow to penetrate for at least 3 minutes.

c. Clean as normal following the instructions on the next page.

8

7

 

9

 

 

6

 

5

4

 

 

1

 

2

3

 

ATTENTION

Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. Please see Stain Removal instructions on page 12.

Machine Prep

Fill the 2-in-1 Water Tank

1.Remove the tank from the base of the machine by lifting up the tank carry handle. Carry like a bucket to the sink.

2.Unlatch the top of the tank from the bottom by lifting up on the tank latches on either

side of the tank.

3.Using the measuring cup provided, pour

5 oz of BISSELL 2X formula into the heavy duty bladder. Fill the rest of the heavy duty bladder with hot (140°F/60°C MAX) tap water. DO NOT BOIL OR MICROWAVE WATER.

NOTE: Always use genuine BISSELL 2X formulas to maximize cleaning and for the safety of your machine.

4. Place the top of the tank back on the bottom and secure the latches on both sides.

NOTE: Remember to secure the tank latches on either side of the tank and test to make sure they are secure before picking up the tank.

1.

3.

2.

4.

WARNING

To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.

www.BISSELL.com

6

Loading...
+ 14 hidden pages