Bissell 6583 User Manual

0 (0)

U S E R ’ S G U I D E

6583 SERIES

Safety Instructions

Product View

Assembly

6-7

Operation

8-12

Maintenance and Care

13-14

Troubleshooting

Consumer Services

Replacement Parts

Warranty

PowerForce

B A G L E S S

Thank you for buying a BISSELL PowerForce

Bagless Vacuum

w w w . b i s s e l l . c a 1 - 8 0 0 - 2 6 3 - 2 5 3 5

We’re glad you purchased a BISSELL PowerForce

Bagless Vacuum.

Everything we know about floor care went into the design and construction

of this powerful, high-tech home vacuuming system.

Your BISSELL PowerForce Bagless is well made, and we back it with a

limited one year warranty. We also stand behind it with a knowledgeable,

dedicated Consumer Services Department, so, should you ever have a

problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL

is a global leader in the design, manufacture, and service of high quality

homecare products like your BISSELL PowerForce Bagless.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

Chairman, President & CEO

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical

appliance, basic

precautions should be observed, including the

following:

READ ALL INSTRUCTIONS

BEFORE USING YOUR

UPRIGHT VACUUM.

Always connect to a polarized outlet (left slot is wider

than right). Unplug from outlet when not in use and

before conducting maintenance.

WARNING: To reduce the

risk of fire, electric shock,

or injury:

■

Do not modify the polarized plug to fit a

non-polarized outlet or extension cord.

■

Do not leave vacuum cleaner unattended when it is

plugged in.

■

Unplug from outlet when not in use and

before servicing.

■

Do not use outdoors or on wet surfaces.

■

Do not allow children to operate vacuum

cleaner or use as a toy.

■

Close attention is necessary when used by or

near children.

■

Do not use for any purpose other than described in

this User’s Guide.

■

Use only manufacturer’s recommended

attachments.

■

Do not use with damaged cord or plug.

■

If appliance is not working as it should,

has been dropped, damaged, left outdoors,

or dropped into water, have it repaired at an

authorized service centre.

■

Do not pull or carry by cord, use cord as a

handle, close a door on cord, or pull cord around

sharp edges or corners. Do not run appliance over

cord. Keep cord away from heated surfaces.

■

Do not unplug by pulling on cord. To unplug, grasp

the plug, not the cord.

■

Do not handle vacuum cleaner or plug with

wet hands.

■

Do not put any object into openings. Do not use

with any opening blocked; keep openings free of

dust, lint, hair, and anything that may reduce

air flow.

■

Keep hair, loose clothing, fingers, and all parts of

body away from openings and moving parts.

■

Turn off all controls before plugging or unplugging

vacuum cleaner.

■

Use extra care when cleaning stairs.

■

Do not pick up flammable materials (lighter fluid,

gasoline, kerosene, etc.) or use in the presence of

explosive liquids or vapours.

■

Do not pick up toxic material (chlorine bleach,

ammonia, drain cleaner, etc.).

■

Do not use vacuum cleaner in an enclosed space

filled with vapours given off by oil base paint, paint

thinner, some moth proofing substances, flammable

dust, or other explosive or toxic vapours.

■

Do not pick up hard or sharp objects such as glass,

nails, screws, coins, etc.

■

Do not pick up anything that is burning or smoking,

such as cigarettes, matches, or hot ashes.

■

Do not use without filters in place.

■

Use only on dry, indoor surfaces.

■

Keep appliance on a level surface.

■

Do not carry the vacuum cleaner while it is running.

SAVE THESE

INSTRUCTIONS FOR

FUTURE USE.

THIS APPLIANCE HAS

A POLARIZED PLUG.

To reduce the risk of electric shock, this appliance has a

polarized plug (one blade is wider than the other). This plug

will fit in a polarized outlet only one way. If the plug does

not fit fully in the outlet, reverse the plug. If it still does not

fit, contact a qualified electrician to install a proper outlet.

Do not change the plug in any way.

This model is for household use only.

w w w . b i s s e l l . c a 1 - 8 0 0 - 2 6 3 - 2 5 3 5

CAUTION:

Do not plug in your

vacuum cleaner until

you are familiar with all

instructions and

operating procedures.

Carrying

Handle

Furniture Protection

Guard

Height

Adjustment

Knob

Power Switch

Crevice Tool

Quick Reach

Handle

Release

Pedal

Stretch Hose

Extension Wand

Combination

Dusting Brush/

Upholstery Tool

Hose Wand

Hose

Wand Base

Foot Hose

Dirt Container

Inner and Outer

Circular Filters

Product view

Hose Clip

Cord Clip

Quick Release

™

Cord Wrap

Powerfoot

Power Cord

Upper Tank

Primary Separator

Handle

Post-Motor

Filter

Lock ’n Seal

™

Lever

Filter Cup

w w w . b i s s e l l . c a 1 - 8 0 0 - 2 6 3 - 2 5 3 5

How to use this guide

Assembly

This User’s Guide has been designed to help

you get the most satisfaction from your BISSELL

PowerForce Bagless. You’ll find assembly and

operating instructions, safety precautions, as well

as maintenance and troubleshooting instructions.

Please read this Guide thoroughly before

assembling your vacuum cleaner.

Pay particular attention to the product diagram,

assembly instructions, and part names. Locate

and organize all parts before assembly. Following

this User’s Guide will greatly enhance your ability

to get the most performance from your BISSELL

PowerForce Bagless for many years.

The only tool you’ll need to assemble your

vacuum cleaner is a screwdriver.

Attach handle to vacuum

1. Locate the vacuum handle and remove the

screw packet taped to the base of the handle.

2. Stand the vacuum upright and place the handle

on the top of the vacuum body.

3. Insert the screws into the existing holes on

each side. Tighten securely with a screwdriver.

Attach vacuum hose and tools

1. Attach the Twist ‘n Snap™ hose by lining up

the tabs on the base with the corresponding

notches on the back of the vacuum as shown.

2. Turn the Twist ‘n Snap hose to the right to lock

the hose into place.

3. Grasping the quick reach handle, slide the end

of the hose wand onto the hose wand base.

Snap the hose into the hose clip.

NOTE: The powerfoot will not operate

effectively unless the hose wand is

firmly attached.

4. Slide the extension wand and the crevice tool

together into the storage clip on the side of

the vacuum.

5. Snap the combination tool into the storage clip

on the back of the vacuum.

WARNING:

Plastic film can be

dangerous. To avoid

danger of suffoca-

tion, keep away from

babies and children.

+ 11 hidden pages