USER'S GUIDE
14U6, 37Y8 SERIES 220-240V
2Thank You
3Safety Instructions
4Product View
5Assembly
6-10 Operations
11Maintenance and Care
12Troubleshooting
13Replacement Parts
14Accessories
15Warranty
16Consumer Services
Thanks for buying a BISSELL CleanView® Reach
We’re glad you purchased a BISSELL CleanView® Reach. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
Your BISSELL CleanView® Reach is well made, and we back it with a limited two year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL CleanView® Reach.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman, President & CEO
2 w w w . b i s s e l l . c o m
IMPORTANTSAFETYINSTRUCTIONS
When using an electrical appliance, basic precautions should be observed, including the following:
Read all instructions before using your deep cleaner.
Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
WARNING: To
reduce the risk of fire, electric shock, or injury:
■Use indoors only
■Do not immerse; use only on surfaces moistened by cleaning process
■Do not leave machine when it is plugged in
■Do not service machine when it is plugged in
■If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard
■Do not use machine if it has been dropped, damaged, left outdoors or dropped into water
■Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces
■Do not carry the appliance while in use
■Do not unplug by pulling on cord; unplug by grasping plug not the cord
■Do not handle plug or appliance with wet hands
■Do not put any object into appliance openings, use with blocked opening or restrict air flow
■Do not expose hair, loose clothing, fingers or body parts to openings or moving parts
■Do not pick up hot or burning objects
■Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapours
■Do not use appliance in an enclosed space filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours
■Remove plug from electrical outlet before cleaning or maintaining the appliance
■Not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety
■Young children should be supervised to ensure that they do not play with the appliance
■Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, petrol, etc.)
■Do not modify the Earthed plug
■Do not use for any purpose other than described in this User’s Guide
■Use only manufacturer’s recommended attachments
■Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage
■Keep openings free of dust, lint, hair, etc.
■Keep appliance on a level surface
■Turn off all controls before unplugging
■Be extra careful when cleaning stairs
■Pay close attention when working around children
SAVE THESE INSTRUCTIONS FOR FUTURE USE
This model is for household use only.
WARNING:
This appliance must be Earthed.
IMPORTANT
FOR OPERATION ON A 220-240 VOLT A.C. 50/60 Hz POWER SUPPLY ONLY.
If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. (Spares may be obtained from your BISSELL supplier). If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a 13 amp socket.
3
w w w . b i s s e l l . c o m
Product view
Spray Trigger
Quick Release
Cord Wrap
Handle
Assembly
Power Cord
Upper Body
Collection
Tank
Removable
Nozzle
Cleaning formula:
Tough Stain
Tool
Hose
Wrap
Hose
Vent Cover
( Foam Filter)
Collection
Tank Latch
Warning:
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner.
Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning
formulas. Non-BISSELL cleaning formulas may harm the machine and will void the warranty.
1.5 L |
1.5 L |
1.5 L |
1.5 L |
1.5 L |
473 mL |
651 mL |
2X Wash |
2X Wash & |
2X Wash & |
2X Wash |
2X Wash |
2X Hard |
Tough |
& Protect |
Protect Pet |
Protect Fresh |
& Protect |
& Protect |
Floor |
Stain |
Professional |
Stain & Odour |
Fragrance |
Spring Breeze |
Lavender |
Solutions |
Precleaner |
Formula w/ |
Formula w/ |
Formula w/ |
Fragrance |
Fragrance |
#56L9-E |
#0400-E |
Scotchgard™ |
Scotchgard™ |
Scotchgard™ |
Formula w/ |
Formula w/ |
|
|
Protector |
Protector |
Protector |
Scotchgard™ |
Scotchgard™ |
|
|
#81L5-E |
#66W9-E |
#92F4-E |
Protector |
Protector |
|
|
|
|
|
#12W4-E |
#33D2-E |
|
|
Note: Additional BISSELL formula options may be available at your local retailer.
4 w w w . b i s s e l l . c o m
Assembly
Your CleanView® Reach assembles quickly and easily. The only tool you will need for assembly is a Phillips head screwdriver.
1.Slide upper body onto lower body.
2.Secure with screws.
3.Attach hose wrap to upper handle by sliding it up the bottom of the handle until it snaps firmly in place.
4.Slide upper handle into upper body, until it will not go any further and secure with screw.
5.Place solution tank on back of unit.
6.Wrap power cord and flex hose.
7.Keep flex hose snugly in place by using the hose secure latch.
8.Attach tool to end of hose.
Assembly is now complete.
1.
3.
5.
7.
2.
4.
6.
8.
5
w w w . b i s s e l l . c o m