BendixKing KFD 840 User Manual

Honeywell International Inc. 23500 W 105th Street Olathe, KS 66061 U.S.A CAGE: 22373 Telephone: (800) 601-3099 (U.S.A./Canada) Telephone: (602) 365-3099 (International)

APEX EDGE SERIES

KFD 840 Primary Flight

Display

Pilot’s Guide

Printed in U.S.A. Pub. No. 7450-0840-01 Sept 13, 2009

Revised Dec 14, 2010

T-1

Honeywell Bendix/King KFD 840 Primary Flight Display

Honeywell-Confidential

THIS COPYRIGHTED WORK AND ALL INFORMATION ARE THE PROPERTY OF HONEYWELL INTERNATIONAL INC., CONTAIN TRADE S ECRETS AND MAY NOT, IN WHOLE OR IN PART, BE USED, DUPLICATED, OR DISCLOSED FOR ANY PURPOSE WITHOUT PRIOR WRITTEN PERMISSION OF HONEYWELL INTERNATIONAL INC. ALL RIGHTS RESERVED.

Honeywell Materials License Agreement

The documents and information contained herein ("the Materials") are the proprietary data of Honeywell International Inc. and Honeywell Intellectual Properties Inc (collectively "Honeywell"). These Materials are provided for the exclusive use of Honeywell Service Centers; Honeywell-authorized repair facilities ; operators of Honeywell aerospace products subject to an applicable product support agreement, their wholly owned-subsidiaries or a formally designated third party service provider thereunder; and direct recipients of Materials from Honeywell's Aerospace Technical Publication Distribution. The terms and conditions of this License Agreemen t g o vern your use of these Materials, except to the extent that any terms and conditions of another applicable agreement with Honeywell regarding the operatio n , maintenance, or repair of Honeywell aerospace products conflict with the terms and conditions of this License Agreement, in which case the terms and conditions of the other agreement will govern. However, this License Agreement will govern in the event of a conflict between its terms and conditions and those of a purchase order or acknowledgement.

1. License Grant - If you are a party to an applicable product

support agreement, a Honeywell Service Center agreement, or an authorized repair facility agreement, Honeywell hereby grants you a limited, non-exclusive license to use these Materials to operate, maintain, or repair Honeywell aerospace products only in accordance with that agreement.

T-2 Rev C May 28, 2010

KFD 840 PG PN 7450-0840-01

Honeywell Bendix/King KFD 840 Primary Flight Display

If you are a direct recipient of these Materials from Honeywell's Aerospace Technical Publication Distribution and are not a party to an agreement related to the operation, maintenance or repair of Honeywell aerospace products, Honeywell hereby grants you a limited, non-exclusive license to use these Materials to maintain or repair the subject Honeywell aerospace products only at the facility to which these Materials have been shipped ("the Licensed Facility"). Transfer of the Materials to another facility owned by you is permitted only if the original Licensed Facility retains no copies of the Materials and you provide prior written notice to Honeywell.

2. Rights In Materials - Honeywell retains all rights in these Materials and in any copies thereof that are not expressly granted to you, including all rights in patents, copyrights, trademarks, and trade secrets. No license to use any Honeywell trademarks or patents is granted under this License Agreement.

3. Confidentiality - You acknowledge that these Materials contain information that is confident ial and proprietary to Honeywell. You agree to take all reasonable efforts to maintain the confidentiality of these Materials.

4. Assignment And Transfer - This License Agreement may be assigned to a formally designated service designee to the extent allowed under an applicable product support agreement or transferred to a subsequent owner or operator of an aircraft containing the subject Honeywell aerospace products. However, the recipient of any such assignment or transfer must assume all of your obligations under this License Agreement. No assignment or transfer shall relieve any party of any obligation that such party then has hereunder.

5. Copies of Materials - Unless you have the express written permission of Honeywell, you may not make or permit making of copies of the Materials. Notwithstanding the foregoing, you may make copies of only portions of the Material for your internal use. You agree to return the Materials and any copies thereof to Honeywell upon the request of Honeywell.

6. Term - This License Agreement is effective until terminated as set forth herein. This License Agreement will terminate immediately, without notice from Honeywell, if you fail to comply with any provision of this License Agreement or will terminate simultaneously with the termination or expiration of your applicable product support agreeme nt, aut hor iz ed repair fac il ity agreement, or your formal designation as a third party service provider. Upon termination of this License Agreement, you will return these Materials to Honeywell without retaining any copies

KFD 840 PG PN 7450-0840-01 Rev C May 28, 2010 T-3

Honeywell Bendix/King KFD 840 Primary Flight Display

and will have one of your authorized officers certify that all Materials have been returned with no copies retained.

7. Remedies - Honeywell reserves the right to pursue all available remedies and damages resulting from a breach of this License Agreement.

8. Limitation of Liability - Honeywell does not make any representation regarding the use or sufficiency of the Materials. THERE ARE NO OTHER WARRANTIES, WHETHER WRITTEN OR ORAL, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, (i) WARRANTIES ARISING FROM COURSE OF PERFORMANCE, DEALING, USAGE, OR TRADE, WHICH ARE HEREBY EXPRESSLY DISCLAIMED, OR (ii) WARRANTIES AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF THIRD PARTIES, EVEN IF HONEYWELL HAS BEEN ADVISED OF ANY SUCH INFRINGEMENT. IN NO EVENT WILL HONEYWEL L BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS WILL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OF LAW, OR OTHERWISE.

9. Controlling Law - This License shall be governed and construed in accordance with the laws of the State of New York without regard to the conflicts of laws provisions thereof. This license sets forth the entire agreement between you and Honeywell and may only be modified by a writing duly executed by the duly authorized representatives of the parties.

Copyright - Notice

Inc. All other marks are owned by their respective companies.

T-4 Rev C May 28, 2010

KFD 840 PG PN 7450-0840-01

Honeywell Bendix/King KFD 840 Primary Flight Display

Revision Histor y and Instr uc ti ons

Manual KFD 840 Primary Flight Display Pilot’s Guide

Revision G, December 14, 2010 Summary Revision F: Revised the Display Brightness section.

Added data about op eration of the SELECT right knob when ENV is on. Revision G: Corrected revision dat e on page footers, no technical changes made.

KFD 840 PG PN 7450-0840-01 Record of Revisions Rev G Dec 14, 2010 RR-1

Honeywell Bendix/King KFD 840 Primary Flight Display

REVISION

A

B

Sept 13, 2009

C

Sept 23, 2009

D

May 28, 2010

E

July 12, 2010

F

Oct 15, 2010

G

Dec 7, 2010

Dec 14, 2010

Record of Revisions

NUMBER

DATE

Record of Revisions KFD 840 PG PN 7450-0840-01 RR-2 Rev G Dec 14, 2010

Honeywell Bendix/King KFD 840 Primary Flight Display

List of Effective Pages

Subheading and Page Date

Title

T-1 T-2 May 28, 2010

T-3 May 28, 2010

T-4 May 28, 2010

Record of Revisions

RR-1 RR-2

List of Effective Pages

LEP-1 LEP-2

Table of Contents

TC-1 TC-2

TC-3 Oct 15, 2010 TC-4 Oct 15, 2010 TC-5 Oct 15, 2010 TC-6

Introduction

1-1 May 28, 2010 1-2 May 28, 2010

Getting Started

2-1 May 28, 2010 2-2 May 28, 2010 2-3 Oct 15, 2010 2-4 May 28, 2010 2-5 Oct 15, 2010 2-6 May 28, 2010 2-7 2-8 Oct 15, 2010 2-9 Oct 15, 2010

Dec 14, 2010

■

Dec 14, 2010

■

Dec 14, 2010

■

Dec 14, 2010

■

Dec 7, 2010

■

Dec 7, 2010

■

May 28, 2010

Oct 15, 2010

Subheading and Page Date

2-10 May 28, 20 10 2-11 Oct 15, 2010 2-12

2-13 2-14 2-15 2-16

Attitude Area

3-1 May 28, 2010 3-2 May 28, 2010 3-3 May 28, 2010 3-4 July 12, 2010 3-5

3-6 May 28, 2010 3-7 May 28, 2010 3-8 May 28, 2010 3-9 May 28, 2010 3-10 May 28, 20 10

Airspeed Area

4-1 May 28, 2010 4-2 May 28, 2010 4-3 May 28, 2010 4-4 May 28, 2010 4-5 May 28, 2010 4-6 May 28, 2010

Altitude Area

5-1 Oct 15, 2010 5-2 May 28, 2010

5-3 Oct 15, 2010 5-4 May 28, 2010 5-5 Oct 15, 2010 5-6 May 28, 2010

Dec 7, 2010

■

May 28, 2010 May 28, 2010 Oct 15, 2010 Oct 15, 2010

Oct 15, 2010

■ indicates a changed or added page.

KFD 840 PG PN 7450-0840-01 List of Effective Pages Rev G Dec 14, 2010 LEP-1

Honeywell Bendix/King KFD 840 Primary Flight Display

List of Effective Pages (cont)

Subheading and Page Date

5-7 May 28, 2010 5-8 Oct 15 2010

VSI Area

6-1 May 28, 2010 6-2 May 28, 2010 6-3 May 28, 2010 6-4 May 28, 2010

HSI Area

7-1 May 28, 2010 7-2 May 28, 2010 7-3 July 12, 2010 7-4 Oct 15, 2010 7-5 7-6 May 28, 2010 7-7 May 28, 2010 7-8 May 28, 2010 7-9 May 28, 2010 7-10 May 28, 2010

Checklist Area

8-1 May 28, 2010 8-2 May 28, 2010 8-3 Oct 15, 2010 8-4 May 28, 2010 8-5

8-6

Weight and Balance Area

9-1 9-2 9-3 9-4 9-5 9-6 9-7 9-8

May 28, 2010

May 28, 2010 May 28, 2010

Oct 15, 2010 Oct 15, 2010 Oct 15, 2010 Oct 15, 2010 Oct 15, 2010 Oct 15, 2010 Dec 7, 2010

■

Oct 15, 2010

■ indicates a changed or added page.

List of Effective Pages KFD 840 PG PN 7450-0840-01 LEP-2 Rev F Dec 7, 2010

Subheading and Page Date

9-9 9-10

Miscellaneous Navigation Area

10-1 May 28, 2010 10-2 May 28, 2010

Emergency Operation s

11-1 Oct 15, 2010 11-2 May 28, 2010 11-3 Oct 15, 2010 11-4

11-5 Oct 15, 2010 11-6 May 28, 2010

Appendix

12-1 Oct 15, 2010 12-2 Oct 15, 2010 12-3 May 28, 2010 12-4 July 12, 2010 12-5 Oct 15, 2010

■

Oct 15, 2010 Oct 15, 2010

Dec 7, 2010

Honeywell Bendix/King KF D 840 Primary Flight Display

Table of Contents

Section

Page

1. INTRODUCTION .................................................................... 1-1

HONEYWELL CUSTOMER SUPPORT ................................. 1-1

Honeywell Aerospace Technical Publications................... 1-2

2. GETTING STARTED.............................................................. 2-1

GENERAL INFORM ATION .................................................... 2-1

Main Disply Areas ............................................................. 2-2

Additional Display Areas ................................................... 2-7

BASIC OPERATION ............................................................... 2-9

Rotary Control Knobs ........................................................ 2-9

Function Keys .................................................................. 2-11

Display Brightness (BRT) ................................................ 2-12

Aircraft Configuration (CONF) ......................................... 2-13

Information (INFO) .......................................................... 2-15

3. ATTITUDE AREA ................................................................... 3-1

ATTITUDE DIRECTOR INDICATOR (ADI) WINDOW ........... 3-1

ARTIFICIAL HORIZON ........................................................... 3-2

AIRCRAFT REFERENCE SYMBOL ...................................... 3-4

ATTITUDE PITCH TAPE ........................................................ 3-4

Excessive Attitude Chevrons ............................................ 3-5

ATTITUDE ROLL POINTER AND SCALE ............................. 3-6

SLIP-SKID/STANDARD RATE TURN MARKER DISPLAY ... 3-8

FLIGHT DIRECTOR COMMAND BARS ................................ 3-9

Single Cue Command Bar................................................. 3-9

4. AIRS P E E D AREA .................................................................. 4-1

AIRSPEED DISPLAY ............................................................. 4-1

SELECTED SPEE D REFERENCE DIGITAL READOUT AND

BUG ........................................................................................ 4-2

AIRSPEED TAPE AND ROLLING DIGITS ............................ 4-2

AIRSPEED TREND VECTOR ................................................ 4-3

AIRSPEED COLOR BANDS .................................................. 4-4

OVER SPEED AWARENESS BAR ........................................ 4-5

LOW SPEED AWARENESS BAR .......................................... 4-5

KFD 840 PG PN 7450-0840-01 Table of Contents Rev F Dec 7, 2010 TC-1

Honeywell Bendix/King KFD 840 Primary Flight D i splay

Table of Contents (cont)

Section

Page

5. ALTI T U D E AREA ................................................................... 5-1

ALTITUDE DISPLAY .............................................................. 5-1

ALTITUDE TAPE .................................................................... 5-2

ALTITUDE ROLLING DIGITS ................................................ 5-2

METRIC ALTITUDE ............................................................... 5-3

ALTITUDE TREND VECTOR ................................................. 5-3

ALTITUDE DATA INVALID ..................................................... 5-4

ALTITUDE SELECT READOUT AND BUG ........................... 5-4

ALTITUDE SELECT DISPLAY ............................................... 5-5

BAROMETRIC (BARO) SETTING ......................................... 5-6

MINIMUM ALTITUDE ALERT (MIN) BUG ............................. 5-6

MINIMUM ALTITUDE ALERT CONDITION ARMED ............. 5-7

VERTICAL DEVIATION SCALE AND POINTER ................... 5-8

Vertical Deviation Invalid ................................................... 5-8

6. VSI AREA ... ........................................................................... 6-1

VERTICAL SPEED (VS) DISPLAY ........................................ 6-1

Vertical Speed Scale and Pointer ..................................... 6-2

Vertical Speed Digital Readout ......................................... 6-2

Vertical Speed Data Invalid ............................................... 6-3

7. HSI AR EA .. ........................................................................... 7-1

HORIZONTAL SITUATION INDICATOR (HSI) WINDOW

DISPLAYS AND ANNUNCIATORS ....................................... 7-1

Full Compass (360 HSI) / Partial Compass (ARC HSI)

Heading Scale ................................................................... 7-1

Heading Readout .............................................................. 7-3

Select Heading Readout AND Bug ................................... 7-3

Heading Select Bug Off-scale ........................................... 7-4

Heading Data Invalid ......................................................... 7-4

Course Selected Digital Readout ...................................... 7-5

Lateral Deviation Scale and Pointer .................................. 7-5

Bearing Pointers ................................................................ 7-6

Bearing Pointer Source ..................................................... 7-7

GPS Identifier and Distance .............................................. 7-7

CDI Source ........................................................................ 7-8

To/From Pointer ................................................................ 7-9

Table of Contents KFD 840 PG PN 7450-0840-01 TC- 2 Rev C May 28, 2010

Honeywell Bendix/King KF D 840 Primary Flight Display

Table of Contents (cont)

Section

Page

8. CHECKLIST AREA ................................................................ 8-1

CHECK LIST FUNCTION ....................................................... 8-1

9. WEIGHT AND BALANCE AREA .......................................... 9-1

PC UTILITY PROGRAM ......................................................... 9-1

File Load Page .................................................................. 9-4

WEIGHT AND BALANCE PAGE ............................................ 9-6

10. MISCELLANEO US DATA AREA ........................................ 10-1

WIND, GROUND SPEED, TRUE AIRSPEED, AND OUTSIDE

AIR TEMPERATURE ........................................................... 10-1

Wind ................................................................................ 10-1

Ground Speed ................................................................. 10-2

True Airspeed .................................................................. 10-2

Outside Air Temperature ................................................. 10-2

11. EMERGENCY OPERATIONS ............................................. 11-1

ADC (AIR DATA COMPUTER) FAILURE ............................ 11-1

ATTITUDE FAILURE, AHRS FAILURE ............................... 11-2

HDG (HEADING) FAIL, CRM FAILURE (COMPASS REMOTE

MAGNETOMETER) .............................................................. 11-3

IN-FLIGHT RESTART .......................................................... 11-4

CONFIGURATION MODULE ERRORS .............................. 11-5

MINOR FAILURE INDICATIONS ......................................... 11-6

12. APPENDIX . ......................................................................... 12-1

ACRONYMS AND ABBREVIATIONS .................................. 12-1

AIRCRAFT CONFIGURATION ............................................ 12-3

KFD 840 PG PN 7450-0840-01 Table of Contents Rev E Oct 15, 2010 TC-3

Honeywell Bendix/King KFD 840 Primary Flight D i splay

Table of Contents (cont)

List of Illustrations

Title Page

Figure 2-1: Controls and Displays ................................................... 2-1

Figure 2-2: Display Main Areas Figure 2-3: Display Symbology Figure 2-4: Display Main Areas – Checklist Figure 2-5: Weight and Balance Page Figure 2-6: Rotary Control Knobs Figure 2-7: Function Keys Figure 2-8: Default KFD 840 Menu Structur e Figure 2-9: KFD Flight Settings Page Part 1 Figure 2-10: KFD Flight Settings Page Part 2 Figure 2-11: KFD Information Page Figure 3-1: Attitude Director Window Figure 3-2: Artificial Horizon Figure 3-3 Artificial Horizon with Large Pitch Angles Figure 3-4: Attitude Failure Indica tio n Figure 3-5: Attitude Roll Pointer and Scale Figure 3-6: Attitude Sky Pointer and Scale Figure 3-7: Slip-Skip Standard Rate Turn Marker Display Figure 4-1: Airspeed Tape Figure 5-1: Altitude Display Figure 6-1: VSI Display Figure 7-1: HSI Display Figure 7-2: Partial Compass (ARC HSI) Figure 7-3: Selected Heading Readout and Bug Figure 7-4: Heading Select Bug Off-Scale Figure 7-5: Lateral Deviation Invalid Figure 7-6: Bearing Pointers Figure 7-7: CDI Source Figure 7-8: TO Pointer Figure 7-9: FROM Pointer Figure 8-1: Checklist Menu - CHK OFF Figure 8-2: Checklist Menu - CHK ON Figure 8-3: Checklist Display Figure 8-4: Check Maintenance Mode Figure 8-5: Checklist Pages on SD Card Figure 8-6: Checklist Saved to KFD 840

Table of Contents KFD 840 PG PN 7450-0840-01 TC- 4 Rev E Oct 15, 2010

....................................................... 2-2

....................................................... 2-5

.................................... 2-7

............................................ 2-8

................................................... 2-9

............................................................. 2-11

............................... 2-11

................................. 2-13

............................... 2-14

.............................................. 2-15

.............................................. 3-1

............................................................ 3-2

...................... 3-2

............................................. 3-3

..................................... 3-6

..................................... 3-7

.............. 3-8

.............................................................. 4-1

............................................................. 5-1

................................................................... 6-1

................................................................... 7-1

......................................... 7-2

............................ 7-3

...................................... 7-4

............................................... 7-6

........................................................... 7-6

................................................................... 7-8

.................................................................... 7-9

............................................................... 7-9

.......................................... 8-1

............................................ 8-2

.......................................................... 8-3

............................................ 8-4

........................................ 8-5

......................................... 8-5

Honeywell Bendix/King KFD 840 Primary Flight Display

Table of Contents (cont)

List of Illustrations

Title Page

Figure 9-1: Weight and Balance Page ............................................ 9-1

Figure 9-2: PC Utility Program Figure 9-3: W&B File Load Page Figure 9-4: Weight and Balance Page Figure 9-5: W&B graph with ENV ON Figure 9-6: Baggage W&B EXCEED Warning Figure 9-7: W&B EXCEED Warning Figure 11-1: Failure Modes Figure 11-2: Attitude Failure Figure 11-3: Heading Fail Figure 11-4: In-Flight Reinitialation

........................................................ 9-2

.................................................... 9-5

............................................ 9-6

............................................. 9-7

................................ 9-8

............................................... 9-9

........................................................... 11-1

.......................................................... 11-2

.............................................................. 11-3

............................................... 11-4

KFD 840 PG PN 7450-0840-01 Table of Contents Rev E Oct 15, 2010 TC-5

Honeywell Bendix/King KFD 840 Primary Flight D i splay

This Page Intentionally Left Blank

.

Table of Contents KFD 840 PG PN 7450-0840-01 TC- 6 Rev E Oct 15, 2010

Honeywell Bendix/King KFD 840 Primary Flight Display

1. INTRODUCTION

HONEYWELL CUSTOMER SUPPORT

For more inform ation, includin g details regarding your warrant y, visit

www.bendixking.com/kfd840pcutility.

For technical support of this product please contact your local Bendix/King Dealer. To locate the Bendix/King Dealer nearest you

www.bendixking.com/kfd840pcutility.

visit For additional support, contact Honeywell Customer & Product

Support at:

US & Canada: 1-877-712-2386 All other countries: 1-913-712-2613 Fax: 1-913-712-5697

KFD 840 PG PN 7450-0840-01 Introduction Rev C May 28, 2010 1-1

BendixKing KFD 840 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1. INTRODUCTION

HONEYWELL CUSTOMER SUPPORT