Dryer |
|
DS 7433 CSRX |
|
||
User Manual |
|
|
Sušičky |
|
|
Návod k použití |
|
|
Sušička |
|
|
|
|
|
Užívateľská príručka |
|
|
2960311180_EN/130815.0940
Please read this user manual first!
Dear Customer,
Thank you for prefering a Beko product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. If you transfer the product to someone else, give its manual as well. Pay attention to all details and warnings specified in the user manual and follow the instructions given therein.
Use this user manual for the model indicated on the cover page.
Explanation of symbols
Throughout this user manual the following symbols are used:
CImportant information or useful hints about usage.
AWarning for hazardous situations with regard to life and property.
BWarning against electric shock.
Warning against hot surfaces.
Warning against fire hazard.
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations.
Do not dispose of the packaging wastes with the domestic waste or other wastes, discard them to the dedicated collection points designated by the local authorities.
2 / 84 EN |
Dryer / User Manual |
|
|
1 Important instructions for safety and environment
This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.
1.1 General safety
•The dryer can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children should not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone.
•Children of less than 3 years should be kept away unless continously supervised.
•Adjustable feet should not be removed. The gap between the dryer and the floor should not be reduced with materials such as carpet, wood and tape. This will cause problems with the dryer.
•Always have the installation and repairing procedures carried out by the Authorized Service. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
•Never wash the dryer by spraying or pouring water onto it! There is the risk of electric shock!
Dryer / User Manual |
3 / 84 EN |
|
|
Important instructions for safety and environment
1.1.1 Electrical safety
A Electrical safety instructions should be followed while electrical connection is made during the installation.
•Connect the dryer to a grounded outlet protected by a fuse at the value specified on the type label. Have the grounding installation performed by a qualified electrician. Our company shall not be liable for any damages that will arise when the dryer is used without grounding in accordance with the local regulations.
•The voltage and allowed fuse protection is stated on the type label plate.
•The voltage specified on the type label must be equal to your mains voltage.
•Unplug the dryer when it is not in use.
•Unplug the dryer from the mains during installation, maintenance, cleaning and repair works.
•Do not touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.
•Do not use extension cords, multi-plugs or adaptors to connect the dryer to power supply in order to decrease the risk of fire and electric shock.
•Power cable plug must be easily accessible after installation.
B Damaged mains cable should be changed notifying the Authorized Service.
B If the dryer is faulty, it must not be operated unless it is repaired by an authorized service agent! There is the risk of electric shock!
4 / 84 EN |
Dryer / User Manual |
|
|
Important instructions for safety and environment
1.1.2 Product safety
Points to be taken into consideration for fire hazard:
Below specified laundry or items must not be dried in the dryer considering fire hazard.
•Unwashed laundry items
•Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin or paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.
For this reason especially the items containing the above specified stains must be washed very well, to do this
use adequate detergent and choose a high washing temperature.
Below specified laundry or items must not be dried in the dryer due to the fire hazard:
•Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads.
•Clothing cleaned with industrial chemicals.
Items such as lighter, match, coins, metal parts, needle etc. may damage the drum set or may lead to functional problems. Therefore check all the laundry that you will load into your dryer.
Never stop your dryer before the programme completes. If you must do this, remove all laundry quickly and lay them out to dissipate the heat.
Clothes that are washed inadequately may ignite on their own and even may ignite after drying ends.
•You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect.
Dryer / User Manual |
5 / 84 EN |
|
|
Important instructions for safety and environment
A Underwear that contains metal reinforcements should not be dried in the dryer. Dryer may be damaged if metal reinforcements come loose and break off during drying.
C Use softeners and similar products in accordance with the instructions of their manufacturers.
C Always clean the lint filter before or after each loading. Never operate the dryer without the lint filter installed.
•Never attempt to repair the dryer by yourself. Do not perform any repair or replacement procedures on the product even if you know or have the ability to perform the required procedure unless it is clearly suggested in the operating instructions or the published service manual. Otherwise, you will be putting your life and others’ lives in danger.
•There must not be a lockable, sliding or hinged door that may block the opening of the loading door in the place where your dryer is to be installed.
•Install your dryer at places suitable for home use. (Bathroom, closed balcony, garage etc.)
•Make sure that pets do not enter the dryer. Check the inside of the dryer before operating it.
•Do not lean on the loading door of your dryer when it is open, otherwise it may fall over.
•The lint must not be allowed to accumulate around the tumble dryer
6 / 84 EN |
Dryer / User Manual |
|
|
Important instructions for safety and environment
1.2 Mounting over a washing machine
•A fixing device should be used between the two machines when installing the dryer above a washing machine. The fitting device must be installed by the authorized service agent.
•Total weight of the washing machine and the dryer -with full loadwhen they are placed on top of each other reaches to approx. 180 kilograms. Place the products on a solid floor that has sufficient load carrying capacity!
Washing machine cannot be placed on the dryer. Pay attention A tomachine.the above warnings during the installation on your washing
Installation Table for Washing Machine and Dryer
Dryer Depth |
|
|
Washing Machine Depth |
|
|
|||
|
|
|
|
|
|
|
||
|
62cm |
60 cm |
54 cm |
50 cm |
49 cm |
45 cm |
40 cm |
|
54 cm |
Can be |
Can be |
Can be |
Can be |
Can be |
Can be |
Cannot be |
|
installed |
installed |
installed |
installed |
installed |
installed |
installed |
||
|
||||||||
|
|
|
|
|
|
|
|
|
60 cm |
Can be |
Can be |
Can be |
Can be |
Can be |
Cannot be |
Cannot be |
|
installed |
installed |
installed |
installed |
installed |
installed |
installed |
||
|
||||||||
|
|
|
|
|
|
|
|
Dryer / User Manual |
7 / 84 EN |
|
|
Important instructions for safety and environment
1.3 Intended use
•Dryer has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.
•Use the dryer only for drying laundry that are marked accordingly.
•The manufacturer waives any responsibility arisen from incorrect usage or transportation.
•The service life of the dryer that you purchased is 10 years. During this period, original spare parts will be available to operate the dryer properly.
1.4 Child safety
•Packaging materials are dangerous for the children. Keep packaging materials away from children.
•Electrical products are dangerous for the children. Keep children away from the product when it is operating. Do not let them tamper with the dryer. Use the child-proof lock in order to prevent the children to tamper with the dryer.
C Child-proof lock is on the control panel. (See Child lock)
•Keep loading door closed even when the dryer is not in use.
8 / 84 EN |
Dryer / User Manual |
|
|
Important instructions for safety and environment
1.5 Compliance with the WEEE regulation and disposing of the waste product
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
This product has been manufactured with high quality parts and
materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the
recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.
1.6 Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
1.7 Package information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
Please visit the following website to get more information on the product. http://www.beko.com
Dryer / User Manual |
9 / 84 EN |
|
|
Important instructions for safety and environment
1.8 Technical Specifications
EN
Height (Min. / Max.) |
84,6 cm / 86,6 cm* |
Width |
59,5 cm |
Depth |
54 cm |
Capacity (max.) |
7 kg** |
Net weight (plastic front door usage) |
46,5 kg |
Net weight (glass front door usage) |
48,5 kg |
Voltage |
|
Rated power input |
See type label*** |
Model code |
|
* Min. height: Height with adjustable feet are closed.
Max. height: Height with adjustable feet are opened maximum.
**Dry laundry weight before washing.
***Type label is located behind the loading door.
C Technical specifications of the dryer are subject to specification without notice to improve the quality of the product.
C Figures in this manual are schematic and may not match the product exactly.
Values stated on markers on the dryer or in the other published documentation accompanying with the dryer are obtained in
C laboratory in accordance with the relevant standards. Depending on operational and environmental conditions of the dryer, these values may vary.
10 / 84 EN |
Dryer / User Manual |
|
|
2 Your Dryer
2.1 Package Contents
1 |
2 |
3 |
4 |
5 |
1.Water drain hose *
2.Filter drawer spare sponge*
3.User Manual
4.Drying basket*
5.Drying basket user manual*
*It can be supplied with your machine depending on its model.
Dryer / User Manual |
11 / 84 EN |
|
|
3 Installation
Before the calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation and water drain is appropriate referring to the user's manual.(See 3.3 Connecting to the drain and 3.5 Electrical connection) If they are not suitable, contact a qualified electrician and technician to make necessary arrangements.
C Preparation of the dryer's location as well as the electrical and waste
water installations is under customer's responsibility.
A Prior to installation, visually check if the dryer has any defects on it. If the drier is damaged, do not have it installed. Damaged products cause risks for your safety.
A Let your dryer wait for 12 hours before starting to use it.
3.1 Appropriate installation location
Install the dryer on a stable and level surface. Dryer is heavy. Do not move it by yourself.
• Operate your dryer in a well ventilated, dust-free environment.
• The gap between the dryer and the surface should not be reduced by the materials such as carpet, wood and tape.
• Do not cover the ventilation grills of the dryer.
• There must not be a lockable, sliding or hinged door that may block the opening of the loading door in the place where your dryer is to be installed.
• Once the dryer is installed, it should stay at the same place where its connections have been made. When installing the dryer, make sure that its rear wall does not touch anywhere (tap, socket, etc.).
• Place the dryer at least 1 cm away from the edges of other furniture.
• Your dryer can be operated at temperatures between +5°C and +35°C. If the operating conditions fall outside of this range, operation of the dryer will be adversely affected and it can get damaged.
• The rear surface of the tumble dryer shall be
placed against a wall.
B
3.2 Removing the transportation safety assembly
A Remove the transportation safety assembly before using the dryer for the first time.
•Open the loading door.
•There is a nylon bag inside the drum that contains a piece of styrofoam. Hold it from its section marked with XX XX.
•Pull the nylon towards yourself and remove the transportation safety assembly.
A Check that no part of the transportation safety assembly remains inside the drum.
3.3 Connecting to the drain
In products equipped with condenser unit, water accumulates in the water tank during the drying cycle. You should drain accumulated water after each drying cycle.
You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank.
Connecting the water drain hose
1-2 Pull hose at the behind of the dryer by hand in order to disconnect it from where it is connected. Do not use any tools to remove the hose.
3Connect one end of the drain hose supplied with the dryer to the connection point from where you removed the hose of the product in previous step.
4Connect the other end of the drain hose directly to the wastewater drain or to the washbasin.
12 / 84 EN |
Dryer / User Manual |
|
|
Installation |
|
1 |
2 |
3 |
4 |
A Hose connection should be made in a safe manner. Your drain house will be flooded if the hose comes out of its housing during water discharge.
C Water drain hose should be attached to a height of maximum 80 cm.
C Make sure that the water drain hose is not stepped on and it is not folded between the drain and the machine.
3.4 Adjusting the feet
•In order to ensure that the dryer operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet.
•Turn the feet to left or right until the dryer stands level and firmly.
AWe recommend carrying the dryer in upright position. If it is not possible to carry the machine in the upright position, we recommend carrying it by tilting towards the right side when looked from the front.
3.7 Warnings about sounds
C It is normal to hear a metallic noise from the compressor sometimes during operation.
C Water collected during operation is pumped to water tank. It is normal to hear pumping noise during this process.
C Never unscrew the adjustable feet from their housings.
3.5 Electrical connection
For specific instructions for electrical connection required during installation (see 1.1.1 Electrical Safety)
3.6 Transportation of the dryer
Unplug the dryer before transporting it.
Drain all water that has remained in the dryer.
If direct water drain connection is made, then remove the hose connections.
3.8 Changing the illumination lamp
In case an illumination lamp is used in your laundry dryer
To change the Bulb/LED used for illumination of your tumble dryer, call your Authorized Service.
The lamp(s) used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to place laundry in the tumble dryer in a comfortable way.
Dryer / User Manual |
13 / 84 EN |
|
|
4 Preparation
4.1 Laundry suitable for drying in the dryer
Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme.
LAUNDRY DRYING SYMBOLS
Drying |
Suitable for |
No Iron |
Sensitive / |
Do not dry |
Do not dry |
Do not dry- |
|
Symbols |
|||||||
dryer |
|||||||
|
|
Delicate dry |
with dryer |
|
clean |
||
|
|
|
|
Drying |
At hightemperature |
|
At lowtemperature |
Without heating |
|
|
Hang wet to dry |
Lay in shadow to dry |
|
Settings |
|
|
|
|
|||||
temperatureAt any |
At medium temperature |
Hang to dry |
Lay to dry |
Drycleanable- |
|||||
Iron - |
|
|
|
|
|
|
|
|
|
Dry or Steam |
|
Iron at high |
Iron at medium |
|
Iron at low |
|
Do not iron |
Iron without steam |
|
|
temperature |
temperature |
|
|
|||||
|
|
temperature |
|
||||||
IRON |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|||
Maximum temperature |
|
200 0C |
150 0C |
|
110 0C |
|
|||
|
|
|
|
|
4.2 Laundry not suitable for drying in the dryer
C Delicate embroidered fabrics, woollen, silk garments, delicate and valuable fabrics, airtight items and tulle curtains are not suitable for machine drying.
4.3 Preparing laundry for drying
•Laundry may be tangled with each other after washing. Separate the laundry items before placing them into the dryer.
•Dry garments having metal accessories such as zippers, inside out.
•Fasten the zippers, hooks and buckles and button sheets.
4.4 Things to be done for energy saving
Following information will help you use the dryer in an ecological and energy-efficient manner.
•Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and energy consumption is reduced.
•Sort out the laundry depending on their type and thickness. Dry the same type of laundry together. For example thin kitchen towels and table clothes dries earlier than thick bathroom towels.
•Follow the instructions in the user manual for programme selection.
•Do not open the loading door of the machine during drying unless necessary. If you must certainly open the loading door, do not to keep it open for a long time.
•Do not add wet laundry while the dryer is in operation
•Clean the lint filter before or after each drying cycle. (See 6.1 Cleaning Lint Filter / Loading Door Inner Surface)
14 / 84 EN |
Dryer / User Manual |
|
|
Preparation
•Clean the filter drawer regularly either when the Filter Drawer Cleaning warning symbol appears or after every 5 drying cycles. (See 6. 4 Cleaning the filter drawer)
•Ventilate the room, where the dryer is located, well during drying.
4.5 Correct load capacity
Follow the instructions in the “Programme selection and consumption table”. Do not load more than the capacity values stated in the table.
C It is not recommended to load the dryer with laundry exceeding the level indicated in the figure. Drying performance will degrade when the machine is overloaded. Furthermore, dryer and the laundry can get damaged.
Following weights are given as examples.
Laundry |
Approximate weights |
|
(g)* |
||
|
||
|
|
|
Cotton quit covers (double) |
1500 |
|
Cotton quit covers (single) |
1000 |
|
|
|
|
Bed sheets (double) |
500 |
|
|
|
|
Bed sheets (single) |
350 |
|
Large tablecloths |
700 |
|
|
|
|
Small tablecloths |
250 |
|
|
|
|
Tea napkins |
100 |
|
Bath towels |
700 |
|
Hand towels |
350 |
|
Blouses |
150 |
|
Cotton shirts |
300 |
|
Shirts |
250 |
|
Cotton dresses |
500 |
|
|
|
|
Dresses |
350 |
|
Jeans |
700 |
|
Handkerchiefs (10 pieces) |
100 |
|
|
|
|
T-Shirts |
125 |
*Dry laundry weight before washing.
Dryer / User Manual |
15 / 84 EN |
|
|
5 Operating the product
5.1 Control panel
1 |
2 |
3 |
|
|
|
6 |
5 |
4 |
1.Program selection knob
2.Remaining duration indicator
3.On/Off button
4.Start/pause button
5.End duration button
6.Sound warning button
5.2 Screen symbols
Tank |
Child-proof |
Filter |
Volume up |
Mute |
Anti |
full |
lock |
cleaning |
|
|
Creasing |
16 / 84 EN |
Dryer / User Manual |
|
|
Operating the product
5.3 Preparing the machine
1.Plug in the machine
2.Place laundry inside the machine.
3.Press the On/Off button.
4.When your machine turns on for the first time, it turns on with the declaration (cotton cabinet dryness) program.
C Pressing the On/Off button doesn‘t mean the program starts.
Press the Start / Pause button to start the program.
5.4 Program selection
1.Determine the appropriate program from the chart below containing the drying levels.
2.Select the program you desire using the Program Selection knob.
Only cotton laundry is dried in normal temperature.
Extra Dry Thick and multi-layered laundry (towels, sheets, jeans etc.) are dried
so that they can be placed into wardrobe without ironing.
Normal laundry (tablecloths,
Cupboard dry underwear etc.) are dried so that they can be placed into wardrobe
without ironing.
|
Normal laundry (Ex: tablecloths, |
|
Cupboard |
underwear) are again dried so |
|
that they can be placed into the |
||
dry + |
||
wardrobe but more so than the |
||
|
||
|
wardrobe dryness option. |
|
|
|
|
Iron Dry |
Normal laundry (shirts, dresses |
|
etc) are dried ready for ironing. |
||
|
||
|
|
C |
For detailed program information see. |
„Program selection and consumption |
|
|
table“.. |
|
|
5.5 Main programs
The main programs are given below based on fabric type.
•Cotton
Dry durable laundry with this program. It dries in normal temperature. Recommended for use with your cotton laundry (sheets, bed covers, towels, bathrobes etc.)
•Synthetic
Dry laundry that is not very durable with this program. Recommended for use with your synthetic laundry.
5.6 Extra programs
The following extra programs are available in the
machine for special conditions.
C
C
•Jeans
Use to dry jeans that are wringed with high rpm in washing machine.
•Sport
Use to dry laundry made from synthetic, cotton or mixed fabrics.
•Express
You can use this program to dry cotton laundry that you had wringed in high rpm in your washing machine. It dries 1 kg of your Cotton laundry (3 shirts / 3 T-shirts) in 50 minutes.
•Daily
Program for daily drying of cotton and synthetic laundry and lasts 110 minutes.
•Shirt
Dries shirts more delicately and thus causes less wrinkles for easy ironing.
•BabyProtect
Program used for baby clothing with can be dried
approval on the label.
C
Dryer / User Manual |
17 / 84 EN |
|
|
Operating the product
•Delicates
You can dry your delicates suitable for drying or laundry that is recommended to hand wash (silk blouses, thin
underwear etc.) in low temperature.
C
•Refresh
It only performs ventilation for 10 minutes without blowing hot air. You can ventilate the cotton and linen clothing that has remained closed for a long duration and remove their odor.
•Timed programmes
You can select the 30 mins and 45 mins time programs to achieve the desired final drying level with low
temperature.
C
18 / 84 EN |
Dryer / User Manual |
|
|
Operating the product
5.7 Program selection and consumption table
EN
Programs |
Capacity (kg) |
Spin speed in washing |
Approximate amount |
Drying time (minutes) |
||
machine (rpm) |
of remaining humidity |
|||||
|
|
|
|
|
|
|
Cottons / Coloreds |
|
|
|
|
||
|
|
|
|
|
|
|
A |
Extra dry |
7 |
1000 |
% 60 |
185 |
|
A |
Cupboard dry |
7 |
1000 |
% 60 |
174 |
|
A |
Iron dry |
7 |
1000 |
% 60 |
140 |
|
Shirt |
1.5 |
1200 |
% 60 |
60 |
||
|
|
|
|
|
||
Jeans |
4 |
1200 |
%50 |
150 |
||
|
|
|
|
|
||
Daily |
4 |
1200 |
%50 |
110 |
||
|
|
|
|
|
||
Sport |
4 |
1000 |
%60 |
135 |
||
|
|
|
|
|
||
Express |
1 |
1200 |
%50 |
50 |
||
|
|
|
|
|
||
Delicates |
2 |
600 |
%40 |
70 |
||
|
|
|
|
|
||
Babyprotect |
3 |
1000 |
% 60 |
80 |
||
|
|
|
|
|
||
Synthetics |
|
|
|
|
||
|
|
|
|
|
||
B |
Cupboard dry |
3.5 |
800 |
% 40 |
70 |
|
B |
Iron dry |
3.5 |
800 |
% 40 |
60 |
|
Energy consumption values |
|
|
|
|
||
|
|
|
|
|
|
|
Programs |
Capacity (kg) |
Spin speed in washing |
Approximate amount |
Energy consumption |
||
machine (rpm) |
of remaining humidity |
value kWh |
||||
|
|
|
||||
|
|
|
|
|
||
Cottons linen Ready to wear* |
7 |
1000 |
% 60 |
1,68 |
||
|
|
|
|
|
||
Cottons Ready to iron |
7 |
1000 |
% 60 |
1,3 |
||
|
|
|
|
|
||
Synthetics Ready to wear |
3.5 |
800 |
% 40 |
0,59 |
||
|
|
|
|
|
||
Power consumption of the off-mode for the standart cotton programme at full load, PO (W) |
0,5 |
|||||
|
|
|||||
Power consumption of the left-on mode for the standart cotton programme at full load, PL (W) |
1,0 |
|||||
|
|
|||||
Contains fluorinated greenhouse gases covered by the Kyoto Protocol. Hermetically sealed. R134a / 0,350kg |
|
|||||
|
|
|
|
|
|
„Cotton cupboard dry programme“ used at full and partial load is the standard drying programme to which the information in the label and the fiche relates, that this programme is suitable for drying normal wet cotton laundry and that it is the most efficient programme in terms of energy consumption for cotton.
* : Energy Label standard program (EN 61121:2012) “All the filters must be cleaned prior to test series.”
All the values in the table are determined according to EN 61121:2012 standard. Consumption values may vary from the values in the table depending on laundry type, wringing revolution, ambient conditions and changes in voltage.
Dryer / User Manual |
19 / 84 EN |
|
|
Operating the product
5.8 Auxiliary functions
Sound warning cancel
Drying machine makes sound warnings when the program is completed. If you don’t want sound notifications, press the “Sound Notification” button. When you press the sound notification button it lights up, and program does not make sound notifications when completed.
C You can select this function before or after the program starts.
5.9 Warning symbols
C Warning symbols may vary according to the specifications of your machine.
Fiber filter cleaning
When the program is completed, a warning led lights up, which indicates that the filter has to be cleaned.
C |
If the filter cleaning led blinks, see the |
„Troubleshooting“ chapter. |
Water tank
When the program is completed, a warning led lights up, which indicates that the water tank must be emptied.
If the water tank fills up while the program is running, warning led starts blinking and the machine goes into stand-by. In that case empty the water in the water tank and start the program by pressing the Start / Pause button. Warning led turns off and the program resumes.
Loading door open
Start/Pause led blinks when the loading door of the drying machine is open.
5.10 End duration
You can delay the end duration of the program for up to 24 hours with the end duration function.
1. Open the loading door and place your laundry.
2. Select the drying program.
3. Press the end duration selection button and set the delay duration you want.
End duration led lights up. (End duration moves continuously when you keep pressing the button).
4. Press the Start / Pause button. End duration countdown begins. The “:” sign in the middle of
the displayed delay duration blinks.
C
Changing the end duration
If you want to change the duration during the countdown:
1.Cancel the program by pressing the On/Off button. Turn on the drying machine again by pressing the On/Off button. When your drying machine turns on for the first time, it turns on with the declaration (cotton wardrobe dryness) program.
2.Select the program you desire using the Program Selection knob.
3.Repeat the end duration operation for the duration you want.
4.Start the program by pressing the Start / Pause button.
Canceling the end duration function
If you want to cancel the end duration setting countdown and start the program right away:
1.Cancel the program by pressing the On/Off button. Turn on the drying machine again by pressing the On/Off button. When your drying machine turns on for the first time, it turns on with the declaration (cotton wardrobe dryness) program.
2.Select the program you desire using the Program Selection knob.
3.Start the program by pressing the Start / Pause button.
20 / 84 EN |
Dryer / User Manual |
|
|
Operating the product
5.11 Starting the program
Start the program by pressing the Start / Pause button. Start/Pause led and the Drying led light up, indicating the program started. The “:” sign in the middle of the remaining duration starts to blink.
5.12 Child Lock
The machine features a child lock which prevents the machine program flow from being affected when buttons are pressed during operation.
When the Child Lock is active, all buttons except for the On/Off button are deactivated.
To activate the child lock, press the Sound Notification button and End Duration button simultaneously for 3 seconds.
Te child lock should be deactivated to be able to start a new program after the current program ends or to be able to interfere with the current program. Keep the
same buttons pressed for 3 seconds again to deactivate the child lock.
C The lock led on the screen lights up when the Child Lock is activated.
C Child Lock deactivates when the machine is turned off and on again using the On/ Off button.
A warning sound is heard when any button is pressed (except for On/Off button) or the Program Selection knob is turned while the child lock is active.
5.13 Changing the program after it is started
After the machine starts running, you can change the program you selected to dry your laundry with a different program.
1.For example, to select Extra Dry program instead of the Iron Dryness, stop the program by pressing the Start / Pause button.
2.Turn the Program Selection knob to select the Extra Dry program.
3.Start the program by pressing the Start / Pause button.
Adding and removing laundry in stand-by mode
If you want to add or remove laundry after the drying program starts:
1. Press the Start/Pause button to take the machine into Stand-by mode. Drying operation stops.
2. Open the loading door, add or remove laundry and close the loading door.
3. Start the program by pressing the Start / Pause
button.
C
C
C
Dryer / User Manual |
21 / 84 EN |
|
|
Operating the product
5.14 Canceling the program
If you want to cancel the program and end the drying operation for any reason after the machine starts
running, press the On/Off button.
A
5.15 Program end
When the program ends, the Final/Wrinkle Prevention, Fiber Filter Cleaning and Water Tank Warning leds on the program follow up indicator light up. Loading door can be opened and machine becomes ready for a second run.
PressCthe On/Off button to turn off the machine.
C
C
22 / 84 EN |
Dryer / User Manual |
|
|
6 Maintenance and cleaning
Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals.
6.1 Cleaning Lint Filter / Loading Door Inner Surface
Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter.
C Such fiber and lint are generally formed during wearing and washing.
A Always clean the lint filter and the inner surfaces of the loading door after each drying process.
C You can clean the lint filter housing with a vacuum cleaner.
To clean the lint filter:
•Open the loading door.
•Remove the lint filter by pulling it up and open the lint filter.
•Clean lint, fiber, and cotton raveling by hand or with a soft piece of cloth.
•Close the lint filter and place it back into its housing.
•A layer can build up on the filter pores that can cause clogging of the filter after using the dryer for a while. Wash the lint filter with warm water to remove the layer that builds up on the lint filter surface. Dry the lint filter completely before reinstalling it.
•Clean the entire inner surface of the loading door and loading door gasket with a soft damp cloth.
Dryer / User Manual |
23 / 84 EN |
|
|
Maintenance and cleaning
6.2 Cleaning the sensor
There are dampness sensors in the dryer that detect whether the laundry is dry or not.
To clean the sensors:
•Open the loading doorof the dryer.
•Allow the machine to cool down if it is still hot due to the drying process.
•Wipe the metal surfaces of the sensor with a soft cloth, dampened with vinegar and dry them.
C Clean metal surfaces of the sensors 4 times a year.
C Do not use metal tools when cleaning metal surfaces of the sensors.
A Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion!
6.3 Draining the water tank
Dampness of the laundry is removed and condensed during drying process and the water that arise accumulates in the water tank. Drain the water tank after each drying cycle.
A Condensed water is not drinkable!
A Never remove the water tank when the program is running!
If you forget to drain the water tank, the machine will stop during the subsequent drying cycles when the water tank is full and the Water Tank warning symbol will flash. If this is the case, drain the water tank and press Start / Pause button to resume the drying cycle. To drain the water tank:
Pull the drawer and remove the water tank carefully.
•Drain the water in the tank.
• If there is lint accumulation in the funnel of the water tank, clean it under running water.
•CPlace the water tank into its seat.
24 / 84 EN |
Dryer / User Manual |
|
|
Maintenance and cleaning
6.4 Cleaning the filter drawer
Lint and fiber that could not be captured by the lint filter are blocked in the filter drawer behind the kick plate. Filter Drawer Cleaning warning light will light up maximum at every 5 drying cycles as a reminder.
There is a two-level filter in the filter drawer. Te first level is the filter drawer sponge and the second level is the filter cloth.
To clean the filter drawer:
•Press the kick plate button to open the kick plate.
•Remove the filter drawer cover by turning it in the direction of arrow.
•Pull out the filter drawer.
•Open the filter drawer by pressing the red button.
•Take out the filter drawer sponge.
•Clean lint, fiber, and cotton raveling on the filter cloth by hand or with a soft piece of cloth.
•When you notice a layer that may lead clogging on the filter cloth, please clean the layer by washing in warm water. Let the filter cloth dry thoroughly before installing back the filter drawer.
•Wash the filter drawer sponge by hand to remove the fiber and lint on the surface. After washing the sponge, squeeze it by hand and remove the excess water. Well-dry the sponge before storing it.
C It is not necessary to clean the sponge if lint and fiber accumulation on it is not significant.
Dryer / User Manual |
25 / 84 EN |
|
|
Maintenance and cleaning
•Place the sponge back into its place.
•Close the filter drawer as to lock the red button.
•Place the filter drawer back into its place, turn the filter drawer cover in the arrow direction and close it securely.
•Close the kick plate cover.
C A dirty lint filter and filter drawer will cause longer drying periods and higher energy consumption.
6.5 Cleaning the evaporator
Clean the lint accumulated on the fins of the evaporator located behind the filter drawer with a vacuum cleaner.
A You can also clean by hand provided that you wear protective gloves. Do not attempt to clean with bare hands. Evaporator fins can harm your hand.
A Drying without the filter drawer sponge in place will damage the machine!
26 / 84 EN |
Dryer / User Manual |
|
|