Dryer |
DPU 8340 X |
Στεγνωτήριο |
|
|
|
|
|
|
|
Please read this user manual first!
Dear Customer,
We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure. Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use. In case of transferring the product to someone else, give the manual as well.
The user manual will help you use your product in a fast and safe way.
•Read the user manual before installing and starting your product.
•Always follow the safety instructions.
•Keep this user manual within easy reach for future reference.
•Read also the other documents supplied with the product.
Remember that this user manual is also applicable for several other models.
Differences between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
Read the instructions.
C
AWarning for hazardous situations with regard to life and property. BWarning for electric shock.
Warning for fire hazard. Warning for hot surfaces.
2960310426_EN/171012.2106
This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance
also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.
1 Important safety instructions
This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.
General safety
•Never place the product on a carpetcovered floor; otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. This will cause problems with your product.
•Do not operate the product if the power cable / plug is damaged. Call the Authorized Service Agent.
•Do not make any changes on the plug supplied with the product. If it is not compatible with the socket, have a qualified electrician change the socket with a suitable one.
•Never touch the plug with wet hands!
Never unplug by pulling on the cable, always pull out by grabbing the plug.
•Connect the product to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table.
•Power cable of this product is equipped with a conductor and a grounding plug that allows for grounding the product. This plug must be inserted into a socket
which is installed and grounded in accordance with the local laws and regulations. Grounding installation decreases the risk of electric shock by opening a path with low resistance for the electricity flow in case of a malfunction or failure. Do not neglect to have the grounding installation made by a qualified electrician.
If you have any suspect about the grounding installation, have it
3
checked by a qualified electrician or the Authorized Service Agent. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
•The product should not be plugged in during installation, maintenance, cleaning and repair works.
•Always have the installation and repairing procedures carried out by the Authorized Service Agent.
Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
•Do not use electrical devices in the product.
•Do not connect the air exit of the product to the chimney holes which are used for the exhaust fumes of the devices operating with gas or other types of fuel.
•You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect.
•Items cleaned or washed with gasoil/fuel oil, dry-laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor.
•Do not dry the laundry cleaned with industrial chemicals in the dryer.
•Underwear that contains metal reinforcements should not be dried in the dryer. Dryer can get damaged if metal reinforcements come loose and
EN
break off during drying.
•Never attempt to repair the product yourself. Do not perform any
repair or replacement procedures on the product even if you know or have the ability to perform the required procedure unless it is clearly suggested in the operating
instructions or the published service manual. Otherwise, you will be putting your life and others' lives in danger.
•For failures that you cannot remedy by applying the procedures in safety instructions, turn off and unplug
the product and call the Authorized Service Agent.
•Do not reach into the machine when the drum is spinning.
•Do not use extension cords, multiplugs or adaptors to connect the dryer to power supply in order to decrease the risk of fire and electric shock.
•Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!
The final step of the drying programme, namely the cool-down step is performed without applying heat to ensure that the laundry items are kept at a temperature that will not damage them. If you open the loading door before the cool-down step completes, hot vapour will come out.
ANever stop the dryer before the programme completes. If you must do this, remove all laundry quickly and lay them out to a suitable place to dissipate the heat.
•Always clean the lint filter before or after each loading. Never operate the dryer without the lint filter installed.
•Clean inside and exhaust duct of the
4
product regularly. Do not allow fibre, dust and dirt accumulation around the exhaust exit and at adjacent areas.
•Power cable plug must be within easy reach after installation.
•Do not dry unwashed items in the dryer.
•Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.
•Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads should not be dried in the dryer.
•Do not use fabric softeners and anti-static products unless they are recommended by the manufacturers of the relevant product.
•Use softeners, anti-static products and etc. in accordance with the instructions of their manufacturers.
•Do not install the product behind a door with a lock, sliding door or a hinged door which can strike the product.
•Do not install or leave the dryer in places where it will be exposed to outdoor conditions.
•Your product can be operated at temperatures between +5°C and +35°C. If the operating conditions fall outside of this range, operation of the product will be adversely affected and it can get damaged.
•Do not tamper with the controls.
•Unplug the product when it is not in use.
•Remove the loading door of
EN
the drying compartment before decommissioning or disposing of the product.
•Check all garments before loading and make sure that there is no any lighters, coins, metal pieces, needles, and etc. in their pockets or on them.
•Make sure that the pets do not enter into the product. Check the drum of the product before using it.
•Make sure that original spare parts and accessories are used during maintenance works.
•Do not lean on the loading door when it is open. The product may tip over.
•When your machine is not in use or when you unload the laundry after completion of drying process, turn the machine off with the On/ Off button. In cases where the On/ Off button is in On position (while the machine is energized), keep the loading door closed.
Intended use
•This product has been designed for domestic use. It should not be used for other purposes.
•Product must only be used for drying of textiles that are marked accordingly.
•Dry only those articles in your product that are stated in this manual.
•This product is not intended to be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.
Children's safety
•Electrical products are dangerous for the children. Keep children away from the product when it is operating. Do
not let them tamper with the product.
•Do not allow children sit/climb on or enter in the product.
•Do not forget to close the loading door when leaving the room where the product is located.
•Packaging materials are dangerous to children. Keep the packaging materials out of reach of children or dispose them by classifying according to waste directives.
5 EN
2 Installation
Refer to the nearest Authorized Service Agent for installation of the product.
To make the product ready for use, make sure that the electricity and water drainage system are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
C Preparation of the product's location as well as the electrical and waste water installations is under customer's responsibility.
BInstallation and electrical connections of the product must be carried out by the Authorized Service Agent.
Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
APrior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.
ALet your dryer wait for 12 hours before starting to use it.
Appropriate installation location
•Install the product on a stable and level surface.
•Dryer is heavy. Do not move it by yourself.
•Operate your product in a well ventilated, dust-free environment.
•Do not block the air ducts in front of and under the product with materials such as long pile rugs, wooden blocks and bands.
•Do not install the product behind a door with a lock, sliding door or a hinged door which can strike the product.
•Once the product is installed, it
should stay at the same place where its connections have been made. When installing the product, make sure that the rear wall of it does
not touch anywhere (tap, socket, etc.). Also pay attention to select an installation location which you will not be required to change afterwards.
• Place the product at least 1.5 cm away from the edges of other furniture.
BDo not place the product on the power cable.
Removing the transportation safety assembly
ARemove the transportation safety assembly before using the product for the first time.
1.Open the loading door.
2.There is a nylon bag inside the drum that contains a piece of styrofoam. Hold it from its section marked with XX XX.
3.Pull the nylon towards yourself and remove the transportation safety assembly.
AMake sure that no part of the transportation safety assembly remains inside the drum.
Under counter installation
•This product can be installed under a counter if the height of the counter is
sufficient.
AWhile using undercounter dryer, it 6 EN
should never be operated without undercounter installation part.
Dryer Depth |
60 cm |
54 cm |
|
|
|
Stock |
|
|
number of |
|
|
under-bench |
2979700100 |
2973600100 |
installation |
|
|
part |
|
|
|
|
|
•Leave at least 3 cm of space around the sides and the rear wall of the product when installing it under a counter or in a cupboard.
Mounting over a washing machine
•A fixing device should be used between the two machines when installing the dryer above a
washing machine. The fixing device
(2977200100 white/2977200400 grey) must be installed by the Authorized Service Agent.
•Total weight of the washing machine and the dryer -with full loadwhen they are placed on top of each other reaches to approx. 180 kilograms. Place the products on a solid floor that has sufficient load carrying capacity!
Connecting to the drain
In products equipped with condenser unit, water accumulates in the water tank during the drying cycle. You should drain accumulated water after each drying cycle.
You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank.
Connecting the water drain hose
1. Pull hose in the product by hand in order to disconnect it from where it is connected. Do not use any tools to remove the hose.
2. Connect one end of the drain hose supplied separately with the product to the connection point from where you removed the hose of the product in previous step.
3. Connect the other end of the drain hose directly to the wastewater drain or to the washbasin.
AHose must be fixed in every type of connection. Your house will be flooded if the hose comes loose during water discharge.
C Water drain hose should be attached
7 EN
to a height of maximum 80 cm.
C Make sure that the water drain hose is not stepped on and it is not folded between the drain and the machine.
Adjusting the feet
In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet.
Turn the feet to left or right until the machine stands level and firmly.
C Never remove the adjustable feet from their housings.
Electrical connection
Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
•Connection must comply with national regulations.
•Power cable plug must be within easy reach after installation.
•The voltage and allowed fuse or breaker protection are specified in the “Technical specifications” section. If the current value of the fuse or breaker in the house is less than 10
Amps, have a qualified electrician install a 10 Amp fuse.
•The specified voltage must be equal to your mains voltage.
•Do not make connections via extension cables or multi-plugs.
• The main fuse and switches must have a contact distance of minimum 3 mm.
BDamaged power cable must be replaced by the Authorized Service Agent.
BIf the product is faulty, it must not be operated unless it is repaired! There is the risk of electric shock!
First use
Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation".
Disposing of packaging material
Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.
Packaging materials of the product are manufactured from recyclable materials. Dispose of them properly and sort
in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste.
Transportation of the product
1. Unplug the product before transporting it.
2. Remove the water drain (if any) and chimney connections.
3. Drain the water in the product completely.
AWe recommend carrying the product in upright position. If it is not possible to carry the machine in the upright position, we recommend carrying
it by tilting towards the right side when looked from the front. After the product is moved to its new place, you should wait for 12 hours before starting it.
8 EN
Disposing of the old product
Dispose of the old product in an environmentally friendly manner.
Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your product.
For children's safety, cut the power cable and break the locking mechanism of the loading door so that it will be nonfunctional before disposing of the product.
Warnings about sounds
C It is normal to hear metallic noise from the compressor sometimes during operation.
Technical specifications
EN
C Water collected during operation is pumped to water tank. It is normal to hear pumping noise during this process.
Height (adjustable) |
84,6 cm |
Width |
59,5 cm |
Depth |
59,8 cm |
Capacity (max.) |
8 kg |
|
|
Weight (net) |
49 kg |
|
|
Voltage |
|
|
|
Rated power input |
See type label |
Model code |
|
Type label is located behind the loading door.
9 EN
3 Preparations for drying
Things to be done for energy saving
Following information will help you use the product in an ecological and energyefficient manner.
•Operate the product at a capacity suitable for the program you have selected and pay attention not to overload.
•Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and energy consumption is reduced.
•Dry the same type of laundry together.
•Follow the instructions in the user manual for programme selection.
•Leave sufficient clearance at the front and rear side of the dryer for air circulation. Do not block the
ventilation grills at the front side of the product.
•Do not open the loading door of the machine during drying unless
necessary. If you must certainly open the loading door, do not to keep it open for a long time.
•Do not add new (wet) laundry during drying.
•Lint and fibres released from the laundry to the air during the drying cycle are collected in the Lint Filter. Clean the lint filter before or after each drying cycle.
•Clean the filter drawer regularly either when the Filter Drawer Cleaning warning symbol appears or after every 5 drying cycles
•Ventilate the room, where the dryer is located, well during drying.
•For models with lamp, keep the door closed if the On/Off button is pressed (if the machine is energized) when
10
machine is not in use.
Laundry suitable for drying in the machine
C Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme.
A B C D
l n m
o p q
Laundry unsuitable for drying in the machine
•Laundry and items stated below are not suitable for drying in a dryer:
•Laundry items with metal attachments such as metal buttons, metal reinforcements or belt buckles.
•Woolen or silk garments, nylon stockings, delicate embroidered fabrics and sleeping bags.
•Garments made of delicate and valuable fabrics.
•Tulle curtains.
•Items made of hermetic fibres such as pillows and quilts.
•Very wet laundry items.
•Unwashed dirty laundry items.
•Laundry items containing rubber foam or rubber.
EN
Items cleaned, washed or spotted with gasoil/fuel oil, dry-laundry solvents, industrial chemicals or other combustible or explosive materials should not be dried in the dryer. Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.
Preparing laundry for drying
• Check all garments before loading and make sure that there is no any lighters, coins, metal pieces, needles, and etc. in their pockets or on them.
• Laundry may be tangled after washing. Separate the laundry items before placing them into the dryer.
• Sort the laundry according to their types and thicknesses. Dry the same type of laundry together. For instance, thin kitchen towel and table cloths get dry earlier than the thick bath towels.
C Laundry must be spun at the highest spin speed that the washing machine allows on basis of the fabric type.
Correct load capacity
Follow the instructions in the “Programme selection and consumption table”. Do not
load more than the capacity values stated in the table.
C It is not recommended to load the dryer with laundry exceeding the level indicated in the figure. Drying performance will degrade when the machine is overloaded. Furthermore, dryer and the laundry can get damaged.
Following weights are given as examples.
Home articles |
Approximate |
|
weights (g) |
||
|
||
Cotton quit covers |
1500 |
|
(double) |
||
|
||
Cotton quit covers |
1000 |
|
(single) |
||
|
||
Bed sheets (double) |
500 |
|
Bed sheets (single) |
350 |
|
Large tablecloths |
700 |
|
Small tablecloths |
250 |
|
Tea napkins |
100 |
|
Bath towels |
700 |
|
Hand towels |
350 |
|
Garments |
Approximate |
|
weights (g) |
||
|
||
Blouses |
150 |
|
Cotton shirts |
300 |
|
Shirts |
200 |
|
Cotton dresses |
500 |
|
Dresses |
350 |
|
Jeans |
700 |
|
Handkerchiefs (10 |
100 |
|
pieces) |
||
|
||
T-Shirts |
125 |
11 EN
Loading the laundry
1.Open the loading door.
2.Place the laundry in the machine without compressing.
3.Push the loading door to close.
AEnsure that no items are caught in the door.
12 EN
4 Selecting a Programme and Operating Your Machine
Control panel
1 |
2 |
|
3 |
4 |
5 |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 |
8 |
7 |
6 |
1.Washing Machine Spin Speed / Timer Programme Selection button
2.Display
3.Start / Pause / Cancel button
4.Programme Selection knob
5.On / Off button
6.Anti-creasing button
7.Dryness Level button
8.Cancel Audio Warning button
9.Time Delay buttons
*
**
Spin speed / Timer programs*
Operation symbol
Pause symbol
Water Tank warning symbol
Filter cleaning warning symbol
Filter Drawer Cleaning warning symbol
Remaining Time indicator**
Child-proof Lock warning symbol
Time Delay mode
Loading door open warning symbol Anti-creasing mode
Audio Warning Level / Cancel Audio Warning
Dryness Level
Anti-creasing is activated
Spin speed is used to show the remaining time more accurately. It does not affect the performance of your machine.
Time that appears on display indicates the remaining time until the end of the programme and changes according to the dampness level of the laundry.
13 EN
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cottons Synthetics |
Express |
Timer |
Ventilation |
Anti |
Iron Dry |
|
Extra dry Cupboard |
||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
programs |
Creasing |
|
|
|
|
|
|
Dry |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Filter |
Jeans |
Shirt |
Buzzer/ |
On/Off |
|
cleaning |
|
|
cancel |
|
|
BabyProtect Sport |
Spin |
Mixed |
Timer |
|
|
|
|
|
|
Delay |
Preparing the machine |
|
|
|||
1. |
Plug in the machine. |
|
|
|
|
2. |
Place the laundry in the machine. |
|
|||
3. Press the On / Off button. |
|
|
|||
C Pressing the On / Off |
button does |
|
not necessarily mean that the programme has started. Press Start / Pause / Cancel button to start the programme.
Programme selection
1.Decide the appropriate programme from the table below which includes drying levels.
2.Select the desired programme with the Programme Selection knob.
|
Only the cotton laundry |
|
is dried at normal |
|
temperature. Thick and |
|
multi layered laundry |
Extra Dry |
(towels, linens, jeans and |
|
etc.) are dried in a way that |
|
they do not require ironing |
|
before being placed in the |
|
wardrobe. |
|
Normal laundry |
|
(tablecloths, underwear |
Cupboard |
and etc.) are dried in a way |
dry |
that they do not require |
|
ironing before being placed |
|
in the wardrobe. |
|
Normal laundry (shirts, |
Iron Dry |
dresses and etc.) are dried |
|
ready to be ironed. |
|
|
Start |
Tank |
Child-proof |
Daily |
pause |
full |
lock |
|
cancel |
|
|
|
Wool |
Drying |
Dryness |
Delicates |
Refresh |
Rack |
Level |
|
C For further programme details, see “Programme selection and consumption table”.
Main programmes
Depending on the fabric type, the following main programmes are available:
• Cottons
Dry durable laundry with this programme. Dries at normal temperature. It is recommended to use for your cotton items (bed sheets, quilt covers, towels, bathrobes, etc.).
• Synthetics
Dry less durable laundry with this programme. Recommended for synthetics.
Additional programmes
For special cases, following additional programmes are available in the machine.
C Additional programs may differ according to the features of your machine.
• Express
You can use this program to dry your cotton laundry that you have spun at high speeds in your washing machine. This program dries 1 kg cotton laundry (3
Shirts/3T-shirts) in 45 minutes.
C To obtain better results from your dryer, your laundry must be washed at suitable programs and spun at the recommended speed in the washing
14 EN
machine.
• Shirt
This programme dries the shirts more sensitively and creases them less and thus, helps to iron them more easily.
C There may be a little moisture on the shirts at the end of the programme. We recommend you not to leave the shirts in the dryer.
• Jeans
Use this programme to dry your jeans that are spun at high speeds in the washing machine.
• Mixed
Use this programme to dry nonpigmenting synthetic and cotton laundry items together.
• Sport
Use this programme to dry together the synthetic and cotton laundry items and the laundry items made of mixed fabrics.
• Wool Refresh
You can use this program to ventilate and soften your woolen laundry that can be washed in the washing machine. Do not use this program to dry your laundry completely. Take out your laundry and ventilate them immediately after the program is over.
• Daily
This program is used to dry cottons and synthetics daily, and lasts for 1.5 hour.
• BabyProtect
This program is used for baby clothes that bear machine dryable approval on its label.
• Delicates
You can dry your highly delicate laundry that are suitable for drying or laundry which is advised to be hand-washed at a lower temperature.
C It is recommended to use a cloth bag to prevent certain delicate laundry from getting creased or damaged.
Take your laundry immediately out of the dryer and hang them after the program is over in order to prevent them from getting creased.
• Ventilation
Only ventilation is performed for 10 minutes without blowing hot air. You can air the clothes that have been kept at closed environments for a long time and deodourise unpleasant odours thanks to this programme.
• Timer programmes
You can select one of the 10 min., 20 min., 30 min., 40 min., 50 min., 60 min.,
80 min., 100 min., 120 min., 140 min. and 160 min. timer programmes to achieve the desired final drying level at low temperatures.
C With this programme, the machine dries for the time selected regardless of the dryness level.
15 EN
Programme selection and consumption table
EN
|
|
|
|
Approximate |
|
|
Programs |
Capacity (kg) |
Spin speed in washing |
amount of |
Drying time |
||
machine (rpm) |
remaining |
(minutes) |
||||
|
|
|
||||
|
|
|
|
humidity |
|
|
|
|
|
|
|
|
|
Cottons / Coloreds |
|
|
|
|
||
|
|
|
|
|
|
|
A |
Extra dry |
8 |
1000 |
% 60 |
190 |
|
A |
Cupboard dry |
8 |
1000 |
% 60 |
179 |
|
A |
Iron dry |
8 |
1000 |
% 60 |
150 |
|
BabyProtect |
3 |
1000 |
% 60 |
80 |
||
|
|
|
|
|
||
Shirt |
1.5 |
1200 |
%50 |
50 |
||
|
|
|
|
|
||
Jeans |
4 |
1200 |
%50 |
120 |
||
|
|
|
|
|
||
Daily |
4 |
1200 |
%50 |
90 |
||
|
|
|
|
|
||
Mixed |
4 |
1000 |
%60 |
115 |
||
|
|
|
|
|
||
Sport |
4 |
1000 |
%60 |
105 |
||
|
|
|
|
|
||
Express |
1 |
1200 |
%50 |
45 |
||
|
|
|
|
|
||
Delicates |
2 |
600 |
%40 |
55 |
||
|
|
|
|
|
||
Wool Refresh |
1.5 |
600 |
%50 |
8 |
||
|
|
|
|
|
||
Synthetics |
|
|
|
|
||
|
|
|
|
|
||
B |
Cupboard dry |
4 |
800 |
% 40 |
70 |
|
B |
Iron dry |
4 |
800 |
% 40 |
55 |
|
Energy consumption values |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
Approximate |
Energy |
|
|
|
|
Spin speed in washing |
amount of |
||
Programs |
Capacity (kg) |
consumption |
||||
machine (rpm) |
remaining |
|||||
|
|
|
value kWh |
|||
|
|
|
|
humidity |
||
|
|
|
|
|
||
|
|
|
|
|
||
Cupboard dry for cottons* |
8 |
1000 |
% 60 |
2.47 |
||
|
|
|
|
|
||
Iron dry for cottons |
8 |
1000 |
% 60 |
2.52 |
||
|
|
|
|
|
||
Cupboard dry for synthetics |
4 |
800 |
% 40 |
1.14 |
||
|
|
|
|
|
|
* : Energy Label standard programme (EN 61121:2005)All values given in the table have been fixed according to EN 61121:2005 Standard. These values may deviate from the values in the table according to the laundry type, laundry spin speed, environmental conditions and voltage fluctuations.
16 EN
Auxiliary functions
Audio Warning
The machine will give an audio warning when the programme comes to an end. If you do not want the machine give an audio warning, press the Volume Level button repeatedly until “x” appears on the display. Use the same button to adjust the volume level.
C You can activate this function either before or after the programme starts.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cancel |
Audio warning |
Audio warning |
Audio warning |
|||||||
audio warning |
|
level 1 |
|
level 2 |
|
level 3 |
Dryness level
Used to adjust the required dryness level.
More drying is performed compared to the default settings when “+” sign appears and less drying is performed when “-” sign appears. Programme duration can change depending on the selection.
C You can activate this function only before the programme has started.
Anti-creasing
You can use Anti-creasing function to prevent laundry from creasing if you will not take the laundry out after the program has come to an end. This program rotates the laundry in every 240 second for 2 hours to prevent creasing.
Anti-creasing is activated but the programme is still running in the first display image below. Drying cycle is completed and the Anti-creasing step has started in the second display image.
C Press Anti-creasing button to activate this function.
Changing the contrast
Adjust the display contrast in order to make the symbols on the display appear clearer. It may particularly be necessary to change the contrast setting of the display when the dryer is installed over a washing machine.
Press and hold the Spin Speed / Timer Programme button for 3 seconds.
When the contrast is changed, all symbols on the display will appear for 3 seconds in order to indicate that the process is complete.
C Perform the same procedure to revert back to the previous contrast setting.
Warning symbols
C Warning symbols may differ according to the model of your machine.
Lint filter cleaning
When the programme is completed, a warning symbol will appear to remind that the filter needs to be cleaned.
CIf the Filter Cleaning symbol flashes continuously, refer to “Troubleshooting” section.
Water tank
When the programme is completed, a warning symbol will appear to remind that the water tank needs to be drained.
If the water tank becomes full while the programme is running, the warning
17 EN