B.Braun Infusomat FM Error code

İNFUSOMAT FMS ERROR CODE LİST

100 defective RAM memory
101 UMOT cannot be switched on
102 UMOT still switched on despite overvoltage
103 UMOT still switched on despite MOTEIN=0
104 UMOT still switched on despite undervoltage
105 ON/OFF key pressed longer than 14 sec
106 defective air sensor (calibration value?)
107 defective program memory
108 defective program flow
109 different number of pump head cycles
110 different keyboard gaps between 80c838 and 68hc11
111 different program versions between 80c535 and 68hc11
112 defective program flow
113 testbit!=0 out of switch-on test
116 defective program memory - text
117 defective program memory - text does not match with program
118 reset during active operation
119 defective ROM

FF01 dummy for test
FF02 battery not present / missing battery current
FF03 defective RAM memory
FF04 defective program memory
FF05 defective program memory
FF06 calibration data error from EEPROM
FF07 pump head cycle not plausible
FF08 failure / inaccuracy of system clock
FF09 failure 100msec system clock
FF10 reset during active operation
FF12 no dynamic pressure sensor signal (EDB)
FF16 defective membrane keyboard (from IFMC02003 on)

İNFUSOMAT FM ERROR CODE LİST

100 defective RAM memory U13
101 UMOT cannot be switched on
102 UMOT still switched on despite overvoltage
103 UMOT still switched on despite MOTEIN=0
104 UMOT still switched on despite undervoltage
105 ON/OFF key pressed longer than 14 sec
106 defective air sensor (calibration value ? )
107 defective LED display
108 defective LED display
109 defective LED display
110 defective LED display - RDTS
111 defective LED display
112 defective LED display
113 defective LED display
114 defective program memory U10, U11, U15
115 defective program flow
116 MS has frequency without drive
117 different number of pump head cycles
118 different keypad gaps between 80c535 and 68hc11
119 mode different in 68hc11
120 changed operating mode
121 defective tube adapter
122 different program versions between 68hc11 and 80c535
123 defective local program flow
124 testbit=0 out of switch-on test
125 PR is not active though 80c535 active PR and 68hc11 active PR
126 PR is active though 80c535 not active PR and 68hc11 active PR
127 text not loaded / defective program memory U10, U11, U15
128 text does not match with program / defective program memory

U10, U11, U15

F01 dummy for test
F02 battery not present / missing battery current
F03 defective RAM memory U17
F04 defective program memory U21, U22, U31
F05 defective program memory U21, U22, U31