ASUS ROG Strix B360-G Gaming operation manual

ROG STRIX B360-G GAMING

Motherboard

E13783

First Edition

February 2018

Copyright© 2018 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.

Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either

(1)for free by downloading it from https://www.asus.com/support/

or

(2)for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.

Legal Compliance Dept.

15 Li Te Rd.,

Beitou, Taipei 112

Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.

The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.

This offer is valid to anyone in receipt of this information.

ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address [e-mail], stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).

ii

Contents

Safety information.......................................................................................................	v
About this guide..........................................................................................................	vi
ROG STRIX B360-G GAMING specifications summary.........................................	viii
Package contents.......................................................................................................	xi
Installation tools and components...........................................................................	xii

Chapter 1:		Product Introduction
1.1	Motherboard overview...............................................................................		1-1
	1.1.1	Before you proceed.....................................................................	1-1
	1.1.2	Motherboard layout......................................................................	1-2
	1.1.3	Central Processing Unit (CPU)....................................................	1-4
	1.1.4	System memory...........................................................................	1-5
	1.1.5	Expansion slots............................................................................	1-7
	1.1.6	Jumper.........................................................................................	1-9
	1.1.7	Internal connectors....................................................................	1-10

Chapter 2:		Basic Installation
2.1	Building your PC system...........................................................................		2-1
	2.1.1	CPU installation...........................................................................	2-1
	2.1.2	Cooling system installation..........................................................	2-3
	2.1.3	Motherboard installation..............................................................	2-5
	2.1.4	DIMM installation.........................................................................	2-6
	2.1.5	ATX power connection.................................................................	2-7
	2.1.6	SATA device connection..............................................................	2-8
	2.1.7	Front I/O connector......................................................................	2-9
	2.1.8	Expansion card installation........................................................	2-10
	2.1.9	M.2 installation...........................................................................	2-11
2.2	Motherboard rear and audio connections..............................................		2-12
	2.2.1	Rear I/O connection...................................................................	2-12
	2.2.2	Audio I/O connections................................................................	2-14
2.3	Starting up for the first time....................................................................		2-16
2.4	Turning off the computer.........................................................................		2-16

iii

Chapter 3:		BIOS Setup
3.1	Knowing BIOS.............................................................................................		3-1
3.2	BIOS setup program...................................................................................		3-2
	3.2.1	Advanced Mode...........................................................................	3-3
	3.2.2	EZ Mode......................................................................................	3-6
	3.2.3	QFan Control...............................................................................	3-7
3.3	My Favorites................................................................................................		3-9
3.4	Main menu.................................................................................................		3-11
3.5	Ai Tweaker menu......................................................................................		3-11
3.6	Advanced menu........................................................................................		3-12
	3.6.1	Platform Misc Configuration.......................................................	3-12
	3.6.2	CPU Configuration.....................................................................	3-12
	3.6.3	System Agent (SA) Configuration..............................................	3-13
	3.6.4	PCH Configuration.....................................................................	3-13
	3.6.5	PCH Storage Configuration.......................................................	3-13
	3.6.6	PCH-FW Configuration..............................................................	3-14
	3.6.7	Onboard Devices Configuration.................................................	3-14
	3.6.8	APM Configuration.....................................................................	3-14
	3.6.9	USB Configuration.....................................................................	3-15
	3.6.10	Network Stack Configuration.....................................................	3-15
	3.6.11	HDD/SSD SMART Information..................................................	3-15
3.7	Monitor menu............................................................................................		3-15
3.8	Boot menu.................................................................................................		3-16
3.9	Tool menu..................................................................................................		3-17
	3.9.1	ASUS EZ Flash 3 Utility.............................................................	3-17
	3.9.2	ASUS Secure Erase..................................................................	3-18
	3.9.3	ASUS User Profile.....................................................................	3-19
	3.9.4	ASUS SPD Information..............................................................	3-19
	3.9.5	Event Log...................................................................................	3-19
	3.9.6	Graphics Card Information.........................................................	3-19
3.10	Exit menu...................................................................................................		3-20
3.11	Updating BIOS..........................................................................................		3-20
	3.11.1	EZ Update..................................................................................	3-20
	3.11.2	ASUS EZ Flash 3.......................................................................	3-21
	3.11.3 ASUS CrashFree BIOS 3..........................................................		3-23
Appendix
Notices A-1
ASUS contact information......................................................................................			A-5

iv

Safety information

Electrical safety

•To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

•When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

•Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.

•Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.

•Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Operation safety

•Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.

•Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

•To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.

•Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.

•Place the product on a stable surface.

•If you encounter technical problems with the product, contact a qualified service technician or your retailer.

v

About this guide

This user guide contains the information you need when installing and configuring the motherboard.

How this guide is organized

This guide contains the following parts:

1.Chapter 1: Product Introduction

This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.

2.Chapter 2: Basic Installation

This chapter lists the hardware setup procedures that you have to perform when installing system components.

3.Chapter 3: BIOS Setup

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.

Where to find more information

Refer to the following sources for additional information and for product and software updates.

1.ASUS website

The ASUS website (www.asus.com) provides updated information on ASUS hardware and software products.

2.Optional documentation

Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.

vi

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.

CAUTION: Information to prevent damage to the components when trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

Typography

Bold text	Indicates a menu or an item to select.
Italics	Used to emphasize a word or a phrase.
<Key>	Keys enclosed in the less-than and greater-than sign
	means that you must press the enclosed key.
	Example: <Enter> means that you must press the Enter or
	Return key.
<Key1> + <Key2> + <Key3>	If you must press two or more keys simultaneously, the key
	names are linked with a plus sign (+).

vii

ROG STRIX B360-G GAMING specifications summary

		Intel® Socket 1151 for 8th generation Core Processors
	CPU	Supports Intel® Turbo Boost Technology 2.0*
		* Intel® Turbo Boost Technology 2.0 support depends on the CPU types
	Chipset	Intel® B360 Chipset
		4 x DIMM, max. 64GB DDR4 2666 / 2400 / 2133 MHz Non-ECC, Un-
		buffered Memory*
		Dual channel memory architecture
	Memory	Supports Intel® Extreme Memory Profile (XMP)
		* Due to Intel® chipset limitation, DDR4 2666MHz memory frequency is only
		supported by 8th Generation Intel® 6-core processors. Higher memory modules
		will run at the maximum transfer rate of DDR4 2666MHz.
		Integrated Graphics ProcessorIntel® HD Graphics support
		Multi-VGA output support : HDMI/DVI ports
	Graphics	- Supports DisplayPort 1.2 with max. resolution 4096 x 2304 @ 60Hz
		- Supports HDMI 1.4b with max. resolution 4096 x 2160 @ 30Hz
		Maximum shared memory of 1024MB
	Multi-GPU	Supports AMD® 2-Way CrossFireX™ Technology
	Support
		1x PCIe 3.0 x16 Safeslot
	Expansion slots	1 x PCIe 3.0 x 16 slot (max. at x4 mode)
		2 x PCIe 3.0 x1 slots
		Intel® B360 Chipset
		- 6 x SATA 6Gb/s ports
		Intel® B360 Chipset
		- 1 x M.2 Socket 3, with M key, type 2242/2260/2280 storage devices
	Storage	support (SATA & PCIE 3.0 x 2 mode)
		- 1 x M.2 Socket 3, with M key, type 2242/2260/2280 storage devices
		support (PCIE 3.0 x 4 mode)*
		- Ready for Intel® Optane Memory*
		* Before using Intel® Optane memory modules, ensure that you have updated your
		motherboard drivers and BIOS to the latest version from ASUS support website.
		1 x Intel® I219-V Gigabit LANDual interconnect between the integrated
	LAN	Media Access Controller (MAC) and physical layer (PHY)
		Anti-surge LANGuard
		(continued on the next page)

viii

ROG STRIX B360-G GAMING specifications summary

		ROG SupremeFX S1220A Codec
		- Dual OP Amplifiers
		- Impedance sense for front and rear headphone outputs
		- Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking
		- High quality 120 dB SNR stereo playback output and 113 dB SNR
		recording input
		- SupremeFX Shielding Technology
	Audio	Audio Feature:
		- LED-lit Audio Shielding: Ensures precision analog/digital separation and
		greatly reduced multi-lateral interference, with a gorgeous illuminated trace
		path
		- Premium Japan-made audio capacitors provides warm, natural, and
		immersive sound with exceptional clarity and fidelity
		- Optical S/PDIF out port(s) at back panel
		- Sonic Radar III
		- Sonic Studio III
		Intel® B360 Chipset
	USB	- 2 x USB 3.1 Gen 2 ports ( 2 ports at back panel [red])
		- 4 x USB 3.1 Gen 1 ports (2 ports at mid-board [black])
		- 6 x USB 2.0 ports( 4 ports at mid-board)

Gamer’s Guardian:

-ESD Guards on LAN, Audio, KBMS and USB3.1 Gen 1/2.0 ports

-DRAM Overcurrent Protection

-Stainless Steel Back I/O

-Highly Durable Components

-DIGI+ VRM

-SafeSlot

GPU Boost

ASUS Exclusive Features:

- AI Suite 3

ASUS Special - ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface

Features

-ASUS Aura lighting control

ASUS EZ DIY:

-ASUS CrashFree BIOS 3

-ASUS EZ Flash 3

-ASUS MyLogo

ASUS Q-Design:

-ASUS Q-Slot

-ASUS Q-DIMM

Pre-mounted I/O Shield

Fan Xpert 4 CORE

(continued on the next page)

ix

ROG STRIX B360-G GAMING specifications summary

		1 x PS/2 keyboard/mouse combo port
		2 x USB 2.0 ports
		1 x DVI port
		1 x HDMI 1.4b port
	Back I/O Ports	2 x USB 3.1 Gen 2 ports (2 x Type-A [Red])
		1 x LAN (RJ45) port
		2 x USB 3.1 Gen 1 ports
		1 x Optical S/PDIF out
		5 x Gold-plated audio jacks
		1 x AAFP connector
		1 x 4-pin RGB Header
		1 x USB 3.1 Gen 1 connector supports additional 2 x USB 3.1 Gen 1 ports
		2 x USB 2.0 connectors supports additional 4 x USB 2.0 ports
		1 x M.2 Socket 3 with M key, type 2242/2260/2280 storage devices support
		(SATA & PCIE 3.0 x 2 mode)
		1 x M.2 Socket 3 with M key, type 2242/2260/2280storage devices support
		(PCIE 3.0 x 4 mode)
	Internal I/O	1 x TPM connector
		1 x COM port connector
	Ports
		6 x SATA 6Gb/s connectors
		1 x AIO_Pump connector
		1 x CPU Fan connector
		1 x Chassis Fan connector
		1 x 8-pin EATX 12 V Power connector
		1 x 24-pin EATX Power connector
		1 x Clear CMOS jumper
		1 x System panel connector
		1 x 128 Mb Flash ROM, UEFI AMI BIOS, PnP, WfM2.0, SM BIOS 3.0, ACPI
		6.0, Multi-language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F6 Qfan
	BIOS	Control, F3 My Favorites, Last Modified log, F12 PrintScreen and ASUS
		DRAM SPD (Serial Presence Detect) memory information, ASUS Secure
		Erase, ASUS User Profile, F4 AURA ON/OFF, F9 Search
	Manageability	WOL, WOR, PXE
		Drivers
	Software	EZ Update
		Anti-virus software (OEM version)
		ASUS Utilities
	Operating	Windows® 10 64-bit
	system support
	Form factor	Micro ATX Form Factor 9.6 inch x 9.6 inch ( 24.4 cm x 24.4 cm )

Specifications are subject to change without notice. Please refer to the ASUS website for the latest specifications.

x

Package contents

Check your motherboard package for the following items.

	Motherboard	1 x ROG STRIX B360-G GAMING motherboard
	Cables	1 x 2-in-1 SATA 6Gb/s cables
		1 x Cable Tie black
	Accessories	1 x ROG Strix Series sticker
		1 x ROG Strix Series Door Hanger
		1 x M.2 Screws Package
	Application drive	1 x ROG motherboard support DVD
	Documentation	1 x User guide

If any of the above items is damaged or missing, contact your retailer.

xi

Installation tools and components

Intel® 1151 CPU

Intel® 1151 compatible CPU Fan

PC chassis	SATA hard disk drive	Phillips (cross) screwdriver

1 bag of screws

DIMM

Power supply unit

SATA optical disc drive (optional)

Graphics card

The tools and components listed above are not included in the motherboard package.

xii

Product Introduction

1

1.1Motherboard overview

1.1.1Before you proceed

Take note of the following precautions before you install motherboard components or change any motherboard settings.

•Unplug the power cord from the wall socket before touching any component.

•Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

•Hold components by the edges to avoid touching the ICs on them.

•Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.

•Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.

Chapter 1

ROG STRIX B360-G GAMING

1-1

1.1.2Motherboard layout

1 Chapter

Refer to 1.1.7 Internal connectors and 2.2.1 Rear I/O connection for more information about rear panel connectors and internal connectors.

1-2	Chapter 1: Product Introduction

Layout contents

Connectors/Jumpers/Slots		Page
1.	ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)	1-16
2.	LGA1151 CPU socket	1-4
3.	Fan and pump connectors (4-pin CPU_FAN; 4-pin AIO_PUMP; 4-pin	1-15
	CHA_FAN1-2)
4.	DDR4 DIMM slots	1-5
5.	Intel® Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6)	1-10
6.	USB 3.1 Gen 1 connector (20-1 pin U31G1_56)	1-13
7.	M.2 sockets (M.2_1; M.2_2)	1-12
8.	System panel connector (20-3 pin PANEL)	1-17
9.	Clear RTC RAM jumper (2-pin CLRTC)	1-9
10.	USB 2.0 connectors (10-1 pin USB78, USB1114)	1-13
11.	TPM connector (14-1 pin TPM)	1-12
12.	Serial port connector (10-1 pin COM)	1-11
13.	AURA RGB header (4-pin RGB_HEADER)	1-14
14.	Front panel audio connector (10-1 pin AAFP)	1-11

Chapter 1

ROG STRIX B360-G GAMING

1-3

1.1.3Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1151 socket designed for the 8th Generation Intel® Core™ processor.

1 Chapter

Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install a CPU designed for LGA1150, LGA1155 and LGA1156 sockets in the LGA1151 socket.

•Ensure that all power cables are unplugged before installing the CPU.

•Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.

•Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1151 socket.

•The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.

1-4	Chapter 1: Product Introduction

1.1.4System memory

The motherboard comes with four DDR4 (Double Data Rate 4) Quad Inline Memory Modules (DIMM) slots.

A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.

Recommended memory configurations

Chapter 1

The recommended memory DIMM slots are marked with an asterix (*).

ROG STRIX B360-G GAMING

1-5

1 Chapter

Memory configurations

You may install 1 GB, 2 GB, 4 GB, 8 GB and 16 GB unbuffered and non ECC DDR4 DIMMs into the DIMM sockets.

You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory

from the higher-sized channel is then mapped for single-channel operation.

• The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value.

•For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition.

•Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules.

1-6	Chapter 1: Product Introduction

1.1.5Expansion slots

Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.

Chapter 1

Slot No. Slot Description

1PCIEX16_1 slot

2PCIEX1_1 slot

3PCIEX1_2 slot 4 PCIEX16_2 slot

ROG STRIX B360-G GAMING

1-7

1 Chapter

		PCI Express 3.0 operating mode
	VGA configuration
		PCIEX16_1	PCIEX16_2
	Single VGA/PCIe card	x16 (single VGA	x4
		recommended)

• We recommend that you provide sufficient power when running CrossFireX™ mode.

•Connect a chassis fan to the motherboard connector labeled CHA_FAN1-2 when using multiple graphics cards for better thermal environment.

IRQ assignments for this motherboard

	A	B	C	D	E	F	G	H
PCIEX16_1	shared	-	-	-	-	-	-	-
PCIEX1_1	-	-	shared	-	-	-	-	-
PCIEX1_2	-	-	shared	-	-	-	-	-
PCIEX16_2	shared	-	-	-	-	-	-	-
M.2_1	shared	-	-	-	-	-	-	-
M.2_2	shared	-	-	-	-	-	-	-
Intel LAN I219V	-	-	-	shared	-	-	-	-
XHCI Controller	-	-	-	shared	-	-	-	-
IGFX	shared	-	-	-	-	-	-	-
LpcBridge	shared	-	-	-	-	-	-	-
SATA Controller	shared	-	-	-	-	-	-	-
High Definition Audio	shared	-	-	-	-	-	-	-
SMBus	shared	-	-	-	-	-	-	-
Gbe Controller	shared	-	-	-	-	-	-	-
CNVi WiFir Controller	shared	-	-	-	-	-	-	-
ME	shared	-	-	-	-	-	-	-

1-8	Chapter 1: Product Introduction

1.1.6Jumper

	1. Clear RTC RAM jumper (2-pin CLRTC)
	This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
	clear the CMOS memory of date, time, and system setup parameters by erasing the	1
	CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
		Chapter
	CMOS, which include system setup information such as system passwords.

To erase the RTC RAM:

1.Turn OFF the computer and unplug the power cord.

2.Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds.

3.Plug the power cord and turn ON the computer.

4.Hold down the <Delete> key during the boot process and enter BIOS setup to re-enter data.

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system boot failure!

•If the steps above do not help, remove the onboard battery and move the jumper again to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery.

•You do not need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values.

•Due to the chipset behavior, AC power off is required to enable C.P.R. function. You must turn off and on the power supply or unplug and plug the power cord before rebooting the system.

ROG STRIX B360-G GAMING

1-9

1.1.7Internal connectors

1. Intel® Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-6)

1 Chapter

These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s

signal cables.

1-10	Chapter 1: Product Introduction

2.Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports HD Audio standard. Connect one end of the front panel audio I/O module cable to this connector.

Chapter 1

We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.

3.Serial port connector (10-1 pin COM)

This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.

The COM module is purchased separately.

ROG STRIX B360-G GAMING

1-11