Vipros 357 Layout Drawings |
©Amada America, Inc. |
Vipros 357 Layout Drawings
Amada America Inc. 7025 Firestone Blvd.
Buena Park CA. 90621 Phone: (714) 739 2111 Fax.: (714) 739 4099 Email info@amada.com
Print Date 04/05/99 version 2.0 |
Page 1 of 7 |
This document available on the Wold Wide Web at http://www.amada.com/support |
|
Vipros 357 Layout Drawings |
©Amada America, Inc. |
Contents |
|
Planning the Location of the Machine |
................................................................................................................................... 3 |
Lifting the Machine................................................................................................................................................................ |
4 |
Machine Plan View................................................................................................................................................................ |
5 |
Machine Elevation and End View.......................................................................................................................................... |
7 |
Maintenance Areas ............................................................................................................................................................... |
8 |
Print Date 04/05/99 version 2.0 |
Page 2 of 7 |
This document available on the Wold Wide Web at http://www.amada.com/support |
|
Vipros 357 Layout Drawings |
©Amada America, Inc. |
Planning the Location of the Machine
The following diagrams provide the details for positioning your new machine.
‰No obstacles are allowed in the worksheet travel area and the ceiling must be at least 40" above the top of the machine.
‰All of the maintenance areas recommended should be used, but you must at least ensure that the doors of the NC unit can be opened.
‰The Vipros 357 machine and control must be protected from direct sunlight or other heat sources.
‰The positioning of the Chiller is very flexible
Print Date 04/05/99 version 2.0 |
Page 3 of 7 |
This document available on the Wold Wide Web at http://www.amada.com/support |
|
Loading...