Trimline Phone
User's Guide
BEFORE YOU BEGIN
MODULAR JACK REQUIREMENT
You need an RJ11C type modular jack, which is the most common type of phone jack and might look like the one pictured here. If you don’t have a modular jack, call your local phone company to find out how to get one installed.
INSTALLING THE PHONE
Your telephone should be placed on a level surface such as a desk top, or you can mount it on a wall , A desktop /wall mounting pedestal is built into the base of the phone.
1.Connect the telephone line cord to a modular telephone jack.
2.Slide the RINGER switch (on the handset ) to ON.
3.Set PULSE/ TONE switch (on the handset ) to TONE for touch-toneservice, or set it to PULSE for rotary service. If you don’t know whichtype of service you have, check with the phone company.
INTRODUCTION
Your Telephone is designed to give you flexibility in use, and high quality performance. To get the most from your new telephone, we suggest that you take a few minutes right now to read through this instruction manual. If you have any questions or problems, consult the Troubleshooting Tips for the solution.
PARTS CHECKLIST
Your package should contain the following items:
Base unit with handset
Model Temporis Mini Slim-EX |
Thomson Asia Limited |
|
3/f., Delta House, 3 On Yiu Street, |
||
00030402 (Rev.0 E/S) |
||
Siu Lek Yuen, Shatin, Hong Kong |
||
09-37 |
||
Printed in China |
www.thomson-asia.com.hk |
WALL MOUNT INSTALLATION
Your telephone may also be mounted on a wall plate (not included).
NOTE: To prevent the handset from falling out of the cradle while the phone is hanging on the wall, you must reverse the handset hook (located on the base).
1. Push the handset hook up and out with your thumb , turn it over ,and replace it in the slot on the base.
2.Slip the mounting holes (on the bottom of the base) over the wall plate posts and
firmly slide the unit down into place. 3. Plug the telephone line cord into a modular
wall phone jack.
WRAPPING THE TELEPHONE LINE CORD
In desktop mode,you may want to wrap the excess telephone line cord through the grooves provided on the bottom of the base.
USING THE TELEPHONE FEATURES
RECEIVING A PHONE CALL
1.Be sure the RINGER switch is set to the High ( ) position.
2.When the phone rings. lift the handset and begin your conversation.
3.Slide the RINGER switch to the Off () position when you do not want to interrupted by the phone ringing.
RINGER VOLUME
You may control the ringer volume level with the switch located between REDIAL and FLASH button on the handset.
= ringer tone will be loud.
= telephone will not ring.
PLACING A PHONE CALL
1.Lift the handset and wait for a dial tone.
2.Dial the telephone number you wish to call.
FLASH BUTTON
Press the FLASH button instead of using the hook switch to activate customer calling services such as call waiting or call transfer , which
are provided by your local phone company. select the appropriate flash timing (on handset, 600ms,300ms, 100ms).
REDIAL BUTTON
This unit redials up to 32 digits. To automatically
redial the last number You called: |
REDIAL |
FLASH |
||
1. |
Pick up the handset to get a dial tone. |
|||
|
|
|||
2. |
Press redial. |
|
|
TEMPORARY TONE FEATURE
If you have Pulse ( rotary ) service ,and want to |
|
access customer calling services that require |
|
touch –tone dialing ,such as getting information |
|
from a local bank ,you can use this feature. |
|
1. Press the TONE button ( * ) after you have |
|
connected to the service in order to enable |
|
touch–tone dialing. |
TONE button |
|
2.When you hang up, the phone automatically returns to pulse dialing mode.
TROUBLESHOOTING TIPS
PROBLEM |
SOLUTION |
|
No dial tone |
• Check hook switch to make sure it pops up. |
|
Won’t dial out |
• MakesureTONE/PULSEissettocorrectposition. |
|
Phone doesn’t ring |
• MakesureRINGERswitchissettoHigh( |
) |
|
• Youmighthavetoomanyphonesononeline. |
|
|
|
|
Feedback when |
• This is normal, power fluctuates with phone |
|
dialing in PULSE mode |
outpulsing. |
|
|
|
|
Can’t be heard by |
• Make sure phone cord is securely plugged in. |
|
other party |
• Make sure other phones aren’t off the hook |
at the same time you ’ re using the phone. It is normal for the volume to drop when additional phones are used at the same time.
CARE AND MAINTENANCE
To keep your phone working and looking good ,follow these guidelines;
•Avoid putting near heating appliances and devices that generate electrical noise (for example , motors and fluorescent lamps)
•DO NOT expose to direct sunlight or moisture.
•Avoid dropping and other rough treatment of the unit.
•Never use a strong cleaning agent or abrasive powder because this will damage the finish.
•Retain the original package in case you need to ship it at a later date.
Used equipment must be disposed of in compliance with current environmental protection regulations. You should return it to your receiver or dispose of it in an approved recycling center.
Alcatel logo and Alcatel name are trademarks of Alcatel and used under license by Thomson Telecom.