3M 6100 MM ST, 8100 SM ST, 6200 MM FC, 8200 SM FC, 6300 MM SC User Manual
...
3
ST, FC, SC Hot Melt Connectors for Indoor/Outdoor Applications
Single-mode and Multimode
3M Hot Melt Connectors can be used in high temperature environments.
3M Hot Melt Connectors have a proven record of high performance and ease of use in local area networks around the world. These connectors are now qualified to TIA/EIA 568B standards for both indoor and outdoor use, including temperatures as high as 85°C (185°F). Drawing on 70 years of adhesive expertise and 40 years of experience in ceramic technology, 3M provides the most convenient, reliable and easy-to-install connectors on the market.
Preloaded adhesive means no syringe and no epoxy mixing is needed, saving installation time. The PC zirconia ceramic ferrule provides superior optical contact and durability. The ability to reheat and reposition fiber within the connector means virtually all connections are successful, saving time and money. And one kit provides everything needed to terminate ST, FC, and SC connectors for both single-mode and multimode applications.
Features |
Benefits |
|
|
Preloaded Hot Melt adhesive |
Easy to use, no epoxy to mix, fewer consumables |
|
|
Terminates in less than 2 minutes |
Saves time and labor |
|
|
Meets TIA/EIA 568B standards for indoor and outdoor applications |
Reliable performance |
|
|
Reheatable adhesive allows fiber repositioning |
High yield reduces waste of connectors and time |
|
|
Pre-radiused PC zirconia ceramic ferrule |
Assures optical contact and stability up to 85°C (185°F) |
|
|
Universal Kit contains consumables for up to 400 connectors* |
Eliminates confusion and lost time |
*Alcohol is not included. Connectors are sold separately.
ST Hot Melt Connector |
FC Hot Melt Connector |
SC Hot Melt Connector
Specifications
Product |
6100 MM |
8100 SM |
6200 MM |
8200 SM |
6300 MM |
8300 SM |
Number |
ST |
ST |
FC |
FC |
SC |
SC |
|
|
|
|
|||
Operating |
-40°C to +85°C |
-40°C to +85°C |
-40°C to +85°C |
|||
Temperature |
(-40°F to +185°F) |
(-40°F to +185°F) |
(-40°F to +185°F) |
|||
|
|
|
|
|||
Attenuation* |
<0.2dB typical |
<0.2dB typical |
<0.2dB typical |
|||
|
|
|
|
|
|
|
Reflection* |
-25dB |
-40dB |
-25dB |
-40dB |
-25dB |
-40dB |
|
typical |
typical |
typical |
typical |
typical |
typical |
|
|
|
|
|||
Mating Durability |
<0.2dB change |
<0.2dB change |
<0.2dB change |
|||
(500 matings) |
|
|
|
|
|
|
|
|
|
|
|||
Storage Temperature |
-40°C to +85°C |
-40°C to + 85°C |
-40°C to +85°C |
|||
|
(-40°F to +185°F) |
(-40°F to + 185°F) |
(-40°F to +185°F) |
|||
|
|
|
|
|||
Testing Specification |
TIA/EIA 568B |
TIA/EIA 568B |
TIA/EIA 568B |
|||
|
|
|
|
|
|
|
Materials and Identification |
|
|
|
|
|
|
|
|
|
|
|||
Ferrule |
Zirconia Ceramic |
Zirconia Ceramic |
Zirconia Ceramic |
|||
|
|
|
|
|||
Housing Body |
Nickel plated zinc |
Engineered resin |
Engineered resin |
|||
|
|
|
|
|||
Boot |
Thermoplastic elastomer |
Thermoplastic elastomer |
Thermoplastic elastomer |
|||
|
|
|
|
|||
Flame Retardancy |
UL-94 V-0 |
UL-94 V-0 |
UL-94 V-0 |
|||
|
|
|
|
|||
Adhesive |
Blue dot on ferrule |
Blue dot on ferrule |
Blue dot on ferrule |
|||
*Multimode connectors tested at 850nm and 1300nm. Single-mode connectors tested at 1310nm and 1550nm.
Loading...