ELECTRONIC CASH REGISTER
TE-2200 TE-2400
DEALER'S MANUAL
Version 1.0 August 2005
Eu Di U.K.
CI Canada
Introduction & Contents
This manual is intended to be used as a reference to the TE-2200 and TE-2400 system. It provides details to allow whole understanding of the system capabilities, its operation, and how it can be used to solve many problems within the retail outlet.
This manual consists of the following chapters:
1.Hardware configuration (for installation)
This chapter describes the hardware of these models and their network systems.
2.IPL (initial program loading)
This chapter describes how to download the application program to the terminal.
3.Initialization
This chapter describes how to set up the peripheral devices and the terminals.
4.Programming
This chapter explains actual programming procedure and functions.
5.Manager mode
6.X/Z report
7.Application system
8.Tips
9.Appendix:
Printing history
Manual version |
Software version |
Version 1.0 : August 2005 |
Version 1.0.0 |
Revised points
2
System configuration ........................................................................................ |
11 |
Hardware configuration .............................................................................................. |
11 |
General configuration ...................................................................................................................... |
11 |
Hardware diagram ........................................................................................................................... |
12 |
Display ............................................................................................................................................. |
13 |
Input/output connectors ................................................................................................................... |
13 |
Online configuration.................................................................................................... |
14 |
Peripheral ports and their connectable devices ............................................................................... |
14 |
IPL (Initial program loading).............................................................................. |
15 |
Memory map of the terminal ....................................................................................... |
15 |
System configuration and procedure ........................................................................ |
15 |
Via COM1 port (to receive IPL data from PC).................................................................................. |
15 |
Via CF card (to send the IPL data to CF card)................................................................................. |
16 |
Via CF card (to send the IPL data to register) ................................................................................. |
16 |
Initialization ........................................................................................................ |
17 |
Machine initialization procedure ................................................................................ |
17 |
Flag clear operation ..................................................................................................... |
19 |
Init 2 operation ............................................................................................................. |
19 |
Entering diag mode ..................................................................................................... |
20 |
Password ...................................................................................................................... |
20 |
Programming (General explanation) ................................................................ |
21 |
Program sub mode (P1 thru P7 mode) ...................................................................... |
21 |
Entering the program sub mode ...................................................................................................... |
21 |
File allocation (Program 5) ................................................................................ |
23 |
File allocation program ............................................................................................... |
23 |
Programming procedure .................................................................................................................. |
23 |
Issuing program reading report of program 5 mode ................................................ |
27 |
Issuing procedure ............................................................................................................................ |
27 |
Report sample ................................................................................................................................. |
27 |
Key allocation (Program 4) ................................................................................ |
29 |
Key allocation program ............................................................................................... |
29 |
Programming procedure .................................................................................................................. |
29 |
Configuration of the physical key layout ................................................................... |
30 |
Issuing program reading report of program 4 mode ................................................ |
32 |
Issuing procedure ............................................................................................................................ |
32 |
Report sample ................................................................................................................................. |
32 |
Key function/machine feature (Program 3) ...................................................... |
33 |
General control program ............................................................................................. |
33 |
Programming procedure .................................................................................................................. |
33 |
Program data (by address code) ..................................................................................................... |
33 |
Address code 01 (date order/password) ................................................................................................... |
33 |
Address code 02 (password) .................................................................................................................... |
33 |
Address code 03 (consecutive number) ................................................................................................... |
33 |
Address code 04 (tax system, rounding, etc.) .......................................................................................... |
34 |
Address code 05 (print control for receipt) ................................................................................................ |
35 |
Address code 06 (calculation & operation control) ................................................................................... |
36 |
Address code 07 (menu & price shift) ....................................................................................................... |
37 |
Address code 08 (print control for fixed total report) ................................................................................. |
38 |
Address code 09 (print control for fixed total report) ................................................................................. |
39 |
Address code 10 (print control for taxable amount, till timer) ................................................................... |
40 |
Address code 13 (online control) .............................................................................................................. |
40 |
Address code 14 (currency exchange control) ......................................................................................... |
41 |
Address code 15 (print control for reports) ............................................................................................... |
42 |
Address code 16 (print control for grand total) ......................................................................................... |
43 |
TE-2200/2400 Dealer's Manual |
3 |
Introduction & Contents |
|
Address code 17 (print control) ................................................................................................................. |
44 |
Address code 18 (print control for guest receipt and slip) ........................................................................ |
45 |
Address code 19 (order control) ............................................................................................................... |
45 |
Address code 21 (message control) ......................................................................................................... |
46 |
Address code 25 (condiment etc.) ............................................................................................................ |
47 |
Address code 26 (check tracking) ............................................................................................................ |
47 |
Address code 27 (clerk control) ................................................................................................................ |
47 |
Address code 28 (Euro) ............................................................................................................................ |
48 |
Address code 29 (Euro) ............................................................................................................................ |
48 |
Address code 30 (Internal thermal printer control) ................................................................................... |
49 |
Address code 32 (direct maintenance PLU) ............................................................................................. |
49 |
Address code 31 (scanning) ..................................................................................................................... |
49 |
Address code 33 (batch PLU maintenance) ............................................................................................. |
50 |
Address code 34 (backlight control) ......................................................................................................... |
50 |
Address code 36 (store/recall/auto new check number) ........................................................................... |
51 |
Address code 37 (check number) ............................................................................................................. |
51 |
Department key/flat-PLU key/PLU program (Batch feature programming) ............ |
52 |
Programming procedure .................................................................................................................. |
52 |
Program data ................................................................................................................................... |
52 |
Department key/flat-PLU key/PLU program (Individual feature programming) ..... |
54 |
Programming procedure .................................................................................................................. |
54 |
Program data (by address code) ..................................................................................................... |
54 |
Transaction key program ............................................................................................ |
57 |
Programming procedure .................................................................................................................. |
57 |
Program data ................................................................................................................................... |
57 |
Clerk program .............................................................................................................. |
80 |
Secret number, drawer, check number programming ...................................................................... |
80 |
Clerk detail link programming .......................................................................................................... |
80 |
Clerk other programming ................................................................................................................. |
81 |
Other programs ............................................................................................................ |
83 |
Time range programming ................................................................................................................ |
83 |
Table range programming ................................................................................................................ |
83 |
Tax table programming .................................................................................................................... |
84 |
Set menu programming ................................................................................................................... |
89 |
Batch X/Z report programming ........................................................................................................ |
89 |
Arrangement programming .............................................................................................................. |
90 |
Check print control programming..................................................................................................... |
90 |
Mix & match programming ............................................................................................................... |
91 |
Employee number programming ..................................................................................................... |
92 |
Scheduler programming .................................................................................................................. |
93 |
Bottle link table programming .......................................................................................................... |
95 |
I/O parameter table programming.................................................................................................... |
96 |
Printer connection table programming ............................................................................................. |
97 |
Non PLU table programming ........................................................................................................... |
98 |
Scanning PLU maintenance programming ............................................................... |
99 |
Batch maintenance PLU programming ............................................................................................ |
99 |
Activation of batch maintenance PLU .............................................................................................. |
99 |
Scanning PLU direct maintenance programming .......................................................................... |
100 |
Scanning PLU individual programming .......................................................................................... |
101 |
One touch NLU programming ........................................................................................................ |
103 |
Issuing program reading report of program 3 mode .............................................. |
104 |
Issuing procedure .......................................................................................................................... |
104 |
Report sample ............................................................................................................................... |
104 |
Character (Program 2) ..................................................................................... |
105 |
Programming descriptors ......................................................................................... |
105 |
Programming procedure ................................................................................................................ |
105 |
Programming data ......................................................................................................................... |
105 |
4
Programming item/key descriptors.......................................................................... |
114 |
Programming procedure ................................................................................................................ |
114 |
Programming data ......................................................................................................................... |
114 |
Programming item/clerk descriptors by range ....................................................... |
116 |
Programming procedure ................................................................................................................ |
116 |
Program data ................................................................................................................................. |
116 |
Entering characters ................................................................................................... |
117 |
By character keyboard ................................................................................................................... |
117 |
By character code .......................................................................................................................... |
119 |
Character code list ......................................................................................................................... |
119 |
Editing characters ..................................................................................................... |
120 |
Correcting a character just entered ............................................................................................... |
120 |
Correcting and adding a PLU descriptor already set ..................................................................... |
120 |
Correcting a key descriptor already set ......................................................................................... |
120 |
Correcting a message descriptor already set ................................................................................ |
120 |
Issuing program reading report of program 2 mode .............................................. |
121 |
Issuing procedure .......................................................................................................................... |
121 |
Report sample ............................................................................................................................... |
121 |
Unit price/rate (Program 1) .............................................................................. |
123 |
Date/time setting ........................................................................................................ |
123 |
Date setting .................................................................................................................................... |
123 |
Time setting ................................................................................................................................... |
123 |
Unit price program ..................................................................................................... |
123 |
Programming procedure ................................................................................................................ |
123 |
Rate program ............................................................................................................. |
125 |
<Currency exchange> ................................................................................................................... |
125 |
<Check>, <New balance>, <Premium (%+)>, <Discount (%–)>, <Rate tax> ................................ |
125 |
Amount program ........................................................................................................ |
125 |
<Cash>, <Check>, <New balance>, <Plus (+)>, <Minus (–)>, <Coupon> .................................... |
125 |
Scanning PLU direct maintenance programming .......................................................................... |
125 |
Issuing program reading report of program 1 mode .............................................. |
126 |
Issuing procedure .......................................................................................................................... |
126 |
Report sample ............................................................................................................................... |
126 |
Program reading (Program 6) ......................................................................... |
127 |
Issuing program reading report ............................................................................... |
127 |
Issuing procedure .......................................................................................................................... |
127 |
Report code ................................................................................................................................... |
127 |
Report sample ............................................................................................................ |
128 |
Fixed totalizer ................................................................................................................................ |
128 |
Transaction key ............................................................................................................................. |
128 |
PLU ................................................................................................................................................ |
129 |
Department .................................................................................................................................... |
130 |
Group ............................................................................................................................................. |
130 |
Clerk .............................................................................................................................................. |
131 |
Hourly sales ................................................................................................................................... |
131 |
Scanning PLU ................................................................................................................................ |
131 |
Table analysis ................................................................................................................................ |
132 |
Grand total ..................................................................................................................................... |
132 |
General control .............................................................................................................................. |
132 |
Special character ........................................................................................................................... |
132 |
Report header ................................................................................................................................ |
133 |
Tax table ........................................................................................................................................ |
133 |
Set menu table............................................................................................................................... |
133 |
Batch X/Z ....................................................................................................................................... |
133 |
TE-2200/2400 Dealer's Manual |
5 |
Introduction & Contents |
|
Clerk detail link .............................................................................................................................. |
134 |
Receipt message ........................................................................................................................... |
134 |
Check endorsement ....................................................................................................................... |
134 |
Slip/external printer message ........................................................................................................ |
135 |
Arrangement table ......................................................................................................................... |
135 |
Character recall ............................................................................................................................. |
135 |
Non-PLU table ............................................................................................................................... |
135 |
Check print control ........................................................................................................................ |
135 |
Mix & match ................................................................................................................................... |
136 |
Employee ....................................................................................................................................... |
136 |
Scheduler....................................................................................................................................... |
136 |
Bottle link table .............................................................................................................................. |
136 |
One touch NLU .............................................................................................................................. |
137 |
Help message ................................................................................................................................ |
137 |
Terminal connection table .............................................................................................................. |
137 |
Printer connection table ................................................................................................................. |
137 |
AT command .................................................................................................................................. |
138 |
Online password ............................................................................................................................ |
138 |
I/O parameter table ........................................................................................................................ |
138 |
Miscellaneous message ................................................................................................................ |
138 |
Printing guidance message ........................................................................................................... |
138 |
Error message ............................................................................................................................... |
139 |
Registration guidance message .................................................................................................... |
139 |
X/Z guidance message .................................................................................................................. |
139 |
Program guidance message .......................................................................................................... |
139 |
Auto-program & system utilities (Program 7) ............................................... |
141 |
Auto-programming .................................................................................................... |
141 |
Auto-programming functions.......................................................................................................... |
141 |
Auto-programming operation ......................................................................................................... |
144 |
Other utilities .................................................................................................................................. |
145 |
Manager operation ........................................................................................... |
149 |
Manager control mode (X1 mode) ............................................................................ |
149 |
Entering the manager control mode .............................................................................................. |
149 |
Assign drawers for each clerk ........................................................................................................ |
149 |
Stock quantity maintenance (PLU/flat PLU/scanning PLU) ................................... |
150 |
To add to the actual stock quantity of a PLU/flat PLU/scanning PLU ............................................ |
150 |
To subtract from the actual stock quantity of a PLU/flat PLU/scanning PLU ................................. |
150 |
To input the new stock quantity of a PLU/flat PLU ......................................................................... |
151 |
Clerk assignment ....................................................................................................... |
151 |
To link clerk button/key to interrupt buffers .................................................................................... |
151 |
To link clerk secret numbers to interrupt buffers ............................................................................ |
151 |
To link clerk numbers to clerk number keys ................................................................................... |
151 |
Programming for the Euro ........................................................................................ |
152 |
Programming for the Australian GST ...................................................................... |
154 |
Programming of items in the program 1 mode ....................................................... |
154 |
To enter the program 1 mode ........................................................................................................ |
154 |
To exit the program 1 mode ........................................................................................................... |
154 |
Read/reset report issuance ............................................................................. |
155 |
Preparation for issuing report .................................................................................. |
155 |
Money declaration ......................................................................................................................... |
155 |
Password (X2/Z2 mode) ................................................................................................................ |
155 |
Issuing read/reset report .......................................................................................... |
155 |
Programmability ............................................................................................................................. |
156 |
Issuing procedure .......................................................................................................................... |
156 |
6
Report sample ............................................................................................................................... |
160 |
Financial report .............................................................................................................................. |
160 |
Individual item/key report ............................................................................................................... |
160 |
Fixed total report ............................................................................................................................ |
161 |
Transaction key report ................................................................................................................... |
162 |
PLU report ..................................................................................................................................... |
163 |
PLU stock report ............................................................................................................................ |
164 |
Department report .......................................................................................................................... |
165 |
Group report .................................................................................................................................. |
166 |
Clerk report .................................................................................................................................... |
167 |
Hourly sales report......................................................................................................................... |
168 |
Monthly report ................................................................................................................................ |
168 |
Table analysis report ...................................................................................................................... |
169 |
Open check report ......................................................................................................................... |
169 |
Scanning PLU report ..................................................................................................................... |
170 |
Scanning PLU stock report ............................................................................................................ |
172 |
Mix & match report......................................................................................................................... |
172 |
Time & attendance report .............................................................................................................. |
173 |
File reset ........................................................................................................................................ |
173 |
Application systems ........................................................................................ |
175 |
Scanning PLU ............................................................................................................ |
175 |
System configuration of the scanning PLU system ....................................................................... |
175 |
Setup ............................................................................................................................................. |
175 |
Barcode system ............................................................................................................................. |
175 |
PLU maintenance .......................................................................................................................... |
176 |
Scanning PLU registration ............................................................................................................. |
177 |
Mix & match discount ..................................................................................................................... |
179 |
Check tracking system .............................................................................................. |
180 |
System configuration ..................................................................................................................... |
180 |
Printing on the external printers .............................................................................. |
181 |
System configuration of the external printer system ...................................................................... |
181 |
Backup system .............................................................................................................................. |
181 |
Printing control options for order .................................................................................................... |
182 |
Time and attendance ................................................................................................. |
182 |
Tips .................................................................................................................... |
183 |
Future order ............................................................................................................... |
183 |
Usage ............................................................................................................................................ |
183 |
Preparation .................................................................................................................................... |
183 |
Eat-in/takeout ............................................................................................................. |
183 |
Automatic execution of Euro switchover by arrangement and scheduler ........... |
184 |
Appendix: Calculation method ....................................................................... |
185 |
Fixed total file............................................................................................................. |
185 |
Appendix: Font code tables ............................................................................ |
187 |
Standard font set (default) ........................................................................................ |
187 |
Multilingual + Euro (Windows code page 858) .............................................................................. |
187 |
Special font set .......................................................................................................... |
188 |
Slavic (Windows code page 852) .................................................................................................. |
188 |
Greek ............................................................................................................................................. |
188 |
Cyrillic (Windows code page 866) ................................................................................................. |
189 |
Baltic .............................................................................................................................................. |
189 |
Arabic............................................................................................................................................. |
190 |
TE-2200/2400 Dealer's Manual |
7 |
Introduction & Contents |
|
Appendix: Peripheral device configuration |
................................................... 191 |
UP-360......................................................................................................................... |
191 |
SP-1300 ....................................................................................................................... |
191 |
Quick scan 6000......................................................................................................... |
192 |
Appendix: File record format .......................................................................... |
193 |
Fixed totalizer file ...................................................................................................... |
193 |
Fixed totalizer (daily) ...................................................................................................................... |
193 |
Fixed totalizer (periodic/consolidation) .......................................................................................... |
193 |
Transaction key file ................................................................................................... |
194 |
Transaction key (daily) ................................................................................................................... |
194 |
Transaction key (periodic/consolidation) ....................................................................................... |
194 |
PLU file ....................................................................................................................... |
194 |
PLU (daily) ..................................................................................................................................... |
194 |
PLU (periodic/consolidation) .......................................................................................................... |
194 |
Department file .......................................................................................................... |
195 |
Department (daily) ......................................................................................................................... |
195 |
Department (periodic/consolidation) .............................................................................................. |
195 |
Group file .................................................................................................................... |
195 |
Group (daily) .................................................................................................................................. |
195 |
Group (periodic/consolidation) ....................................................................................................... |
195 |
Clerk file...................................................................................................................... |
196 |
Clerk (programming) ...................................................................................................................... |
196 |
Clerk detail (daily, periodic/consolidation) ...................................................................................... |
196 |
Clerk detail link (program) .............................................................................................................. |
196 |
Hourly sales file ......................................................................................................... |
197 |
Hourly sales (daily) ........................................................................................................................ |
197 |
Hourly sales (periodic/consolidation) ............................................................................................ |
197 |
Monthly sales file ....................................................................................................... |
197 |
Monthly sales (daily, periodic/consolidation) .................................................................................. |
197 |
Scanning PLU files .................................................................................................... |
198 |
Scanning PLU file (daily) ............................................................................................................... |
198 |
Non PLU table file (program) ......................................................................................................... |
198 |
Batch maintenance PLU file (program) .......................................................................................... |
198 |
Direct maintenance PLU file (program) ......................................................................................... |
198 |
One touch NLU table file ................................................................................................................ |
199 |
Mix & match table file ................................................................................................ |
199 |
Mix & match table file (daily) .......................................................................................................... |
199 |
Mix & match table file (periodic/consolidation) ............................................................................... |
199 |
Bottle link table file .................................................................................................... |
199 |
Bottle link table file (program) ........................................................................................................ |
199 |
Table analysis file ...................................................................................................... |
200 |
Table analysis (daily) ..................................................................................................................... |
200 |
Table analysis (periodic/consolidation) .......................................................................................... |
200 |
Time and attendance file ........................................................................................... |
200 |
Time and attendance (daily) .......................................................................................................... |
200 |
Employee file ................................................................................................................................. |
200 |
Grand total file ........................................................................................................... |
201 |
Grand total (daily) .......................................................................................................................... |
201 |
Grand total (consolidation)............................................................................................................. |
201 |
General control file .................................................................................................... |
201 |
General control .............................................................................................................................. |
201 |
Special character file ................................................................................................. |
202 |
Special character ........................................................................................................................... |
202 |
8
Report header file ...................................................................................................... |
202 |
Report header ................................................................................................................................ |
202 |
Tax table file ............................................................................................................... |
202 |
Tax table ........................................................................................................................................ |
202 |
Set menu table file ..................................................................................................... |
202 |
Set menu table............................................................................................................................... |
202 |
Batch X/Z file .............................................................................................................. |
203 |
Batch X/Z ....................................................................................................................................... |
203 |
Receipt message file ................................................................................................. |
203 |
Receipt message ........................................................................................................................... |
203 |
Check endorsement message file ............................................................................ |
203 |
Check endorsement message ....................................................................................................... |
203 |
Slip/external printer message file ............................................................................ |
203 |
Slip/external printer message ........................................................................................................ |
203 |
Arrangement file ........................................................................................................ |
204 |
Arrangement file ............................................................................................................................ |
204 |
Character recall file ................................................................................................... |
204 |
Character recall ............................................................................................................................. |
204 |
Check print file ........................................................................................................... |
204 |
Check print..................................................................................................................................... |
204 |
Scheduler file ............................................................................................................. |
204 |
Scheduler....................................................................................................................................... |
204 |
System files ................................................................................................................ |
205 |
Character key table file .................................................................................................................. |
205 |
Key table file .................................................................................................................................. |
206 |
Terminal connection table file ........................................................................................................ |
207 |
Printer connection table ................................................................................................................. |
207 |
Operation start date file ................................................................................................................. |
207 |
Initialize code file ........................................................................................................................... |
207 |
AT command file ............................................................................................................................ |
208 |
Online password file ...................................................................................................................... |
208 |
I/O parameter table file .................................................................................................................. |
208 |
System error log file ....................................................................................................................... |
208 |
Graphic image files.................................................................................................... |
208 |
Graphic logo file ............................................................................................................................. |
208 |
Graphic logo file (for external printer) ............................................................................................ |
208 |
Watermark print file ........................................................................................................................ |
208 |
Guidance message files ............................................................................................ |
209 |
Error message file .......................................................................................................................... |
209 |
Miscellaneous message file ........................................................................................................... |
213 |
Printing guidance message file ...................................................................................................... |
214 |
X/Z guidance message file ............................................................................................................ |
216 |
Program guidance message file .................................................................................................... |
218 |
Registration guidance message file ............................................................................................... |
221 |
Help message file .......................................................................................................................... |
222 |
Appendix: Compulsory .................................................................................... |
227 |
Appendix: Error code ....................................................................................... |
229 |
Index .................................................................................................................. |
233 |
TE-2200/2400 Dealer's Manual |
9 |
Introduction & Contents
10
System configuration
Hardware configuration
General configuration
1 Operator display
2 Customer display (Popup display)
3 Stroke keyboard (TE-2200)
4 Touch keyboard (TE-2400)
5 CF card slot cover
6 Printer cover
7 Mode switch
8 Connector cover (opposite side)
|
|
6 |
2 |
|
|
2 |
|
|
|
|
|
|
|
|
6 |
|
|
1 |
|
8 |
|
|
1 |
|
|
7 |
8 |
|
|
|
|
|
3 |
|
7 |
|
|
|
|
|
5 |
|
4 |
|
|
|
|
|
|
|
5 |
System configuration
TE-2200/2400 Dealer's Manual |
11 |
System configuration
Hardware diagram
Main Display
Popup display
Journal printer
Receipt printer
Power supply
|
|
|
Popup |
|
|
|
|
|
|
|
|
|
|
|
|
disp. |
|
Drawer |
|
Drawer |
|||||
|
|
|
|
|
||||||||
|
|
|
i/f |
|
1 i/f |
|
2 i/f |
|||||
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
drawer kit MDL-12 |
||
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
Multi |
||
|
|
|
Drawer |
|||||||||
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drawer
CPU
RS232C COM1
PRL-CB-2
MODEM or PC
Scanner
HHS-15
Note: Shadowed device and dot line indicate option devices.
Keyboard
Flash
RAM
Memory
RS232C COM2
PRT-CB-8C
Slip printer
SP-1300
Power supply
31AD-U/E
CF card
PRT-CB-8A/-8B
External printer
UP-360
Power supply
12
Display
Contrast control (Except for U.S. model)
RECEIPT |
DATE/ |
HELP |
|
TIME |
|||
ON/OFF |
|
LIGHT DARK
CONTRAST
Input/output connectors
Input /output connectors
COM ports are located in the leftside connector cover.
|
SCANNER |
|
PC/MODEM |
|
|
COM2 |
|
COM1 |
|
|
|
|
|
|
|
|
|
|
|
System configuration
TE-2200/2400 Dealer's Manual |
13 |
System configuration
Online configuration
Peripheral ports and their connectable devices
|
Model |
Device |
|
Drawer |
COM port |
|
||
|
|
port |
COM1 |
|
COM2 |
|
||
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
MODEM/PC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
External printer |
|
|
|
|
|
|
|
|
(Max. 2 printers) |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
TE-2200 |
|
|
|
|
|
|
|
|
Slip printer |
|
|
|
|
|
|
|
|
TE-2400 |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
Scanner |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drawer |
|
1 (Max 2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
: can connect |
|
|
|
|
|
|
|
Available device/cable list |
|
|
|
|
|
|||
External printer: |
UP-360 |
|
|
|
|
|
||
Printer cable: |
PRT-CB-8A(3m) or PRT-CB-8B(5m) |
|
|
|||||
Slip printer: |
SP-1300 |
|
|
|
|
|
||
Printer cable: |
PRT-CB-8C |
|
|
|
|
|
||
Power supply: |
AD31U or AD31E |
|
|
|
|
|||
Scanner (Hand-held): |
HHS-15 |
|
|
|
|
|
||
Scanner (LASER): |
PSC Quick Scan 6000 |
|
|
|
|
|||
Scanner (Fixed) |
PSC HS1250 |
|
|
|
|
|
||
MODEM: |
US Robotics 56K V.92 External Faxmodem/56K Faxmodem (U.S. only) |
|||||||
PC cable: |
PRL-CB-2 |
|
|
|
|
|
Steps to define COM port/peripheral devices
After connecting peripheral devices, programming of I/O parameter table, printer connection table are necessary.
START
No
Connect Modem or PC?
Yes
Connect it to COM1 port.
No |
Connect a scanner? |
Yes |
Connect it to COM2 port.
No
Connect a slip printer?
Yes
Connect it to free COM1 or COM2 port.
No |
Connect external printer(s)? |
Yes |
Connect it (them) to free COM port(s).
END
14
IPL (Initial program loading)
IPL should be made before initializing when the application program has been modified.
Memory map of the terminal
The application programs are downloaded from PC (via COM port)/other terminal (via inline or COM port)/CF card to the internal flash memory.
CF card |
|
|
backup data |
|
|
program data |
|
|
|
|
|
RAM |
|
|
totalizer/counter, |
|
|
work area |
|
|
|
|
|
Flash memory |
5 |
|
|
||
Application program |
Application program |
|
ROM |
IPL |
|
|
||
bios, program loader |
|
|
some diagnosis |
|
|
|
|
|
IPL
System configuration and procedure
Via COM1 port (to receive IPL data from PC)
Operation
1.Set the mode switch to OFF position.
2.While holding down the <JOURNAL FEED>, turn the mode switch to PGM position.
3.Release <JOURNAL FEED> after the register shows “INIT”.
4.Enter “44449999” and press <SUBTOTAL>.
5.Enter “0” (communication speed: 38400 bps) and press <SUBTOTAL>.
6.Start the IPL program of the PC.
PC
COM1 port
TE-2200/2400 Dealer's Manual |
15 |
IPL (Initial Program Loading)
Via CF card (to send the IPL data to CF card)
Operation
1.Set the mode switch to OFF position.
2.Open the CF card slot cover and insert the CF card securely.
(Please check that the CF card is vacant. Refer to the “System utility section in PGM7”.)
3.Turn the mode switch to PGM position.
4.Enter “7” and press <SUBTOTAL>.
5.Enter “170” and press <SUBTOTAL>.
6.Enter “49” and press <CASH>.
(In case of quitting, press <SUBTOTAL> instead of <CASH>.) 7. Turn OFF the register and pull out the CF card.
Via CF card (to send the IPL data to register)
Operation
CF card
1. Set the mode switch to OFF position.
2.Open the CF card slot door and insert the CF card securely.
3.While holding down the <JOURNAL FEED>, turn the mode switch to PGM position.
4. Release <JOURNAL FEED> after the register shows “INIT”.
5. Enter “44449999” and press <SUBTOTAL>.
6. Enter “20” and press <SUBTOTAL>.
Never plug/unplug the CF card during IPL.
16
Initialization
Machine initialization procedure
1.Plug the power cord into an AC outlet.
2.Hold down <JOURNAL FEED>.
3.Turn the mode switch to PGM position.
4.Release <JOURNAL FEED>.
You should see “0000000000” on the display.
If 10 zeros are not shown or another character are shown, immediately set the mode switch to OFF and restart from the beginning of this procedure.
5.Enter 11-digit program code from the worksheet.
6.Press <SUBTOTAL> to register the program code.
(Wait until beep twice.)
7. Press <SUBTOTAL> to register the program code.
RECEIPT |
|
Initialization |
FEED |
|
|
REG2 |
X1 |
|
REG1 |
|
Z1 |
OFF |
|
X2/Z2 |
RF |
|
|
PGM |
|
|
RECEIPT JOURNAL
FEED FEED
D11D10D9D8 ~ D3D2D1 s
refer to Worksheet (Initialize)
TE-2200/2400 Dealer's Manual |
17 |
Initialization
Worksheet (Initialize)
Description |
|
|
Choice |
Program code |
|
|
|
|
|
Print password of PGM mode, when flag clear operation is performed. |
|
Yes = 0 |
: |
|
|
|
|
No = 4 |
D11 |
Password in PGM3 ~ 7 mode |
|
|
Significant |
:::: |
|
|
numbers |
||
|
|
|
D10 D9 D8 D7 |
|
Messages and descriptors are written in |
|
|
Significant |
: |
English = 0, French = 1, Spanish = 2, German = 4 |
|
|
number |
D6 |
|
|
|
||
Model for |
|
|
Significant |
|
U.S. or Canada (Date order: month/day/year) |
= 2, |
|
: |
|
Other area (~00, Date order: day/month/year) |
= 1, |
|
number |
D5 |
Other area (0, Date order: day/month/year) |
= 3 |
|
|
|
|
|
|
||
|
|
|
|
|
Fixed value: |
|
|
Significant |
:: |
TE-2200: 25 |
|
|
||
|
|
numbers |
||
TE-2400: 04 |
|
|
D4 D3 |
|
|
|
|
|
|
Use |
|
a |
1 = 0 |
|
1 clerk switch (clerk push switch)/ |
|
: |
||
|
2 = 1 |
|||
2 Clerk secret number key * |
|
|
||
|
|
|
|
(a+b) |
Initialization pattern: |
|
|
1 = 0 |
|
|
b |
D2 |
||
1 For scanning/2 For check tracking |
|
|
2 = 2 |
|
|
|
|
|
|
Use Euro only. |
|
|
No = 0 |
: |
|
|
Yes = 1 |
||
|
|
|
D1 |
* When you select this option “Use clerk secret code key”, and your register doesn’t have this key on the default keyboard, be sure to allocate <CLERK-#> (clerk secret number key) just after the initialization.
(Do NOT turn to OFF before allocating this key.)
Note:
Please check the receipt after initialization operation (machine initialization, flag clear operation and init2) that the machine number is printed properly.
If error codes are printed on it, check the hardware and retry the operation.
P01 03-04-2004 11:58
C01 MC#01 000001
INIT
(C) 2005 by CASIO COMPUTER CO.,LTD. All rights reserved.
TE-2200/2400 STD
VER. :nnnn
LABEL :nnnnnn
VER. :nnnn
LABEL :nnnnnn
INIT. :nnnnnnnnnnnnnn 0002-98 2000
:
—Mode symbol/date/time
—Clerk descriptor/Mc-No./consecutive No.
—INIT symbol
—Copyright
—Model name
—ROM version
—ROM label
—ROM version
—ROM label
—Initialization code
—I/O parameter table record No./error code
18
Flag clear operation
1. Plug the power cord into an AC outlet.
2. |
Hold down <RECEIPT FEED>. |
|
JOURNAL |
|
FEED |
||
|
|
||
|
|
REG2 |
X1 |
|
|
REG1 |
Z1 |
3. |
Turn the mode switch to PGM position. |
OFF |
X2/Z2 |
|
|
RF |
|
4. Release <RECEIPT FEED>.
You should see “FFFFFFFFFF” on the display.
If 10 Fs are not shown or another character are shown, immediately set the mode switch to OFF and restart from the beginning of this procedure.
5. Press <SUBTOTAL> to complete.
PGM
RECEIPT JOURNAL
FEED FEED
After completion of flag clear, receipt is issued.
Note: After flag clear, clerk 1 is assigned automatically. So do not program clerk 1 as not assignable or not operable in PGM mode.
Initialization
Init 2 operation
1.Plug the power cord into an AC outlet.
2.Hold down <RECEIPT FEED>.
3.Turn the mode switch to PGM position.
4.Release <RECEIPT FEED>.
You should see “FFFFFFFFFF” on the display.
If 10 Fs are not shown or another character are shown, immediately set the mode switch to OFF and restart from the beginning of this procedure.
JOURNAL
FEED
REG2 X1
REG1 Z1 OFF X2/Z2
RF
PGM
RECEIPT JOURNAL
FEED FEED
5. Enter “8888888888” and press <CHECK TEND> to complete.
After completion, receipt is issued.
TE-2200/2400 Dealer's Manual |
19 |
Initialization
Entering diag mode
1.Plug the power cord into an AC outlet.
2.Hold down <JOURNAL FEED>.
3.Turn the mode switch to PGM position.
4.Release <JOURNAL FEED>.
5.Enter “99990000” and press <SUBTOTAL> to enter the diagnosis.
RECEIPT
FEED
REG2 X1
REG1 Z1
OFF |
X2/Z2 |
RF
PGM
RECEIPT JOURNAL
FEED FEED
Password
During initialize operation, you can program the password for PGM 3 ~ 7. If it is set, every time you enter PGM 3 ~ 7 mode, you must input this password by the following procedure.
1.Press <#-1> (normally <CASH/AMT TEND>).
2.Enter password.
3.Press <#-2> (normally <SUBTOTAL>).
Otherwise, you can do nothing in the PGM 3 ~ 7 mode.
20
Programming (General explanation)
Program sub mode (P1 thru P7 mode)
Program mode contains seven sub modes listed below. When you change the mode switch to PGM mode, the register is always in the PGM 1 mode. In case of using other mode, enter the sub mode number (2 ~ 7) and press <SUBTOTAL>.
•PGM1: unit price, rate, date, time, scanning PLU unit price maintenance
•PGM2: descriptor, name, message
•PGM3: machine feature (general function, clerk, etc.), key feature (department, transaction), scanning PLU maintenance
•PGM4: key allocation
•PGM5: file allocation
•PGM6: program reading
•PGM7: auto-program, system utility
Entering the program sub mode
Procedure (for PGM 1, 2 mode)
PGM |
|
|
|
PGM1 |
661s6a : : : : 6s |
|
|||
6 |
||||
Mode switch |
|
password (4-digit) |
|
|
|
|
|
|
PGM2 |
|
62s6a : : : : 6s |
|
||
|
6 |
|||
|
|
password (4-digit) |
|
1.Enter password for PGM 1, 2 mode. If the register has no password for the PGM1 and 2 mode, you need not to enter it.
2.Press <SUBTOTAL>. An error occurs if you try to enter the PGM1 or 2 mode without inputting a password (when one is programmed), or if the password you input does not match the one programmed for the register.
To avoid repetition, the above operation is abbreviated to the following for all of the other procedure in this manual. This password is defined by the address code 02 of the general function program.
Procedure (for PGM 3 ~ 7 mode)
Programming
PGM |
63 7s |
6 a: : : : 6 s |
|
6 PGM 3 ~ 7 |
|||
Mode switch |
|
password (4-digit) |
1.Enter password for PGM 3 ~ 7 mode. If the register has no password for the PGM 3 ~ 7 mode, you need not to enter it.
2.Press <SUBTOTAL>. An error occurs if you try to enter the PGM 3 ~ 7 mode without inputting a password (when one is programmed), or if the password you input does not match the one programmed for the register.
To avoid repetition, the above operation is abbreviated to the following for all of the other procedure in this manual. This password is defined during initialization operation.
TE-2200/2400 Dealer's Manual |
21 |
Programming (General explanation)
22
File allocation (Program 5)
File allocation program
Programming procedure
PGM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
65s6 : ::s6 : : a |
|
||||||||||||||||||
6 s |
|||||||||||||||||||
Mode switch |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
File record number (see next pages.) |
|||||||
File attribution code (see below.) File number (see next pages.) |
|
|
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
File attribu- |
|
|
|
|
|
|
|
|
|
|
|
Consolidation file |
|
|
|
||||
tion code |
|
daily sales |
Periodic 1 |
|
Periodic 2 |
Daily sales |
|
Periodic 1 |
|
Periodic 2 |
|
||||||||
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Program 5
TE-2200/2400 Dealer's Manual |
23 |
File allocation programming (P5)
File number list
File |
File description |
Record |
Max No. |
Description |
Attribu- |
Allocat- |
Default |
|
No. |
length |
of records |
tion |
able |
Rec. No. |
|||
|
|
|||||||
|
|
|
|
|
|
|
|
|
System files |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
088 |
Auto-program work |
6 |
1 |
|
Work |
No |
1 |
|
|
|
|
|
|
|
|
|
|
089 |
Consecutive number work |
6 |
1 |
|
Work |
No |
1 |
|
|
|
|
|
|
|
|
|
|
091 |
Terminal connection table |
12 |
1 |
|
Program |
Yes |
32 |
|
|
|
|
|
|
|
|
|
|
093 |
Printer connection table |
5 |
7 |
|
Program |
Yes |
3 |
|
|
|
|
|
|
|
|
|
|
094 |
Start date |
4 |
1 |
|
Buffer |
No |
1 |
|
|
|
|
|
|
|
|
|
|
095 |
Initialize code |
7 |
1 |
|
Program |
No |
1 |
|
|
|
|
|
|
|
|
|
|
096 |
AT command |
62 |
2 |
|
Program |
Yes |
2 |
|
|
|
|
|
|
|
|
|
|
097 |
Online password |
8 |
1 |
|
Program |
Yes |
1 |
|
|
|
|
|
|
|
|
|
|
098 |
I/O parameter table |
4 |
2 |
|
Program |
No |
4 |
|
|
|
|
|
|
|
|
|
|
099 |
System error log |
11 |
99 |
|
Buffer |
Yes |
99 |
|
|
|
|
|
|
|
|
|
|
Function and total files |
|
|
|
|
|
|
||
001 |
Fixed totalizer |
22 |
99 |
|
Pgm/Sale |
No |
99 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 1) |
10 |
99 |
|
Sales |
Yes |
99 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 2) |
10 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(daily consolidation) |
10 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 1 consolidation) |
10 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 2 consolidation) |
10 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
002 |
Transaction key |
35 |
999 |
|
Pgm/Sale |
Yes |
30 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 1) |
10 |
999 |
|
Sales |
Yes |
30 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 2) |
10 |
999 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(daily consolidation) |
10 |
999 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 1 consolidation) |
10 |
999 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 2 consolidation) |
10 |
999 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
004 |
PLU |
73 |
*A |
|
Pgm/Sale |
Yes |
216 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 1) |
30 |
*A |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 2) |
30 |
*A |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(daily consolidation) |
30 |
*A |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 1 consolidation) |
30 |
*A |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 2 consolidation) |
30 |
*A |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
005 |
Department |
59 |
99 |
|
Pgm/Sale |
Yes |
30 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 1) |
25 |
99 |
|
Sales |
Yes |
30 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 2) |
25 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(daily consolidation) |
25 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 1 consolidation) |
25 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 2 consolidation) |
25 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
006 |
Group |
22 |
99 |
|
Pgm/Sale |
Yes |
10 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 1) |
10 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 2) |
10 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(daily consolidation) |
10 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 1 consolidation) |
10 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 2 consolidation) |
10 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
009 |
Hourly sales |
24 |
99 |
|
Pgm/Sale |
Yes |
24 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 1) |
20 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 2) |
20 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(daily consolidation) |
20 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 1 consolidation) |
20 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 2 consolidation) |
20 |
99 |
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
*A: Depend on the model
24
File |
File description |
Record |
Max No. |
Description |
Attribu- |
Allocat- |
Default |
||
No. |
length |
of records |
tion |
able |
Rec. No. |
||||
|
|
||||||||
|
|
|
|
|
|
|
|
||
010 |
Monthly sales |
20 |
31 |
|
Pgm/Sale |
Yes |
31 |
||
|
|
|
|
|
|
|
|
||
--- |
(periodic total 1) |
20 |
31 |
|
Sales |
Yes |
0 |
||
|
|
|
|
|
|
|
|
||
--- |
(periodic total 2) |
20 |
31 |
|
Sales |
Yes |
0 |
||
|
|
|
|
|
|
|
|
||
--- |
(daily consolidation) |
20 |
31 |
|
Sales |
Yes |
0 |
||
|
|
|
|
|
|
|
|
||
--- |
(periodic 1 consolidation) |
20 |
31 |
|
Sales |
Yes |
0 |
||
|
|
|
|
|
|
|
|
||
--- |
(periodic 2 consolidation) |
20 |
31 |
|
Sales |
Yes |
0 |
||
|
|
|
|
|
|
|
|
||
018 |
Table analysis |
28 |
99 |
|
Pgm/Sale |
Yes |
0 |
||
|
|
|
|
|
|
|
|
||
--- |
(periodic total 1) |
10 |
99 |
|
Sales |
Yes |
0 |
||
|
|
|
|
|
|
|
|
||
--- |
(periodic total 2) |
10 |
99 |
|
Sales |
Yes |
0 |
||
|
|
|
|
|
|
|
|
||
--- |
(daily consolidation) |
10 |
99 |
|
Sales |
Yes |
0 |
||
|
|
|
|
|
|
|
|
||
--- |
(periodic 1 consolidation) |
10 |
99 |
|
Sales |
Yes |
0 |
||
|
|
|
|
|
|
|
|
||
--- |
(periodic 2 consolidation) |
10 |
99 |
|
Sales |
Yes |
0 |
||
|
|
|
|
|
|
|
|
|
|
020 |
Grand total |
20 |
3 |
|
|
Pgm/Sale |
Yes |
3 |
|
|
|
|
|
|
|
|
|
|
|
--- |
(daily consolidation) |
8 |
3 |
|
|
Sales |
Yes |
3 |
|
Check files |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
||
015 |
Check index |
255 |
200 |
|
Buffer |
Yes |
(60)*B |
||
|
|
|
|
|
|
|
|
||
056 |
Separate check buffer |
100 |
1500 |
|
Buffer |
Yes |
(80)*B |
||
|
|
|
|
|
|
|
|
||
060 |
Check detail |
100 |
9999 |
|
Buffer |
Yes |
(900)*B |
||
|
|
|
|
|
|
|
|
|
|
Clerk files |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
007 |
Clerk |
38 |
99 |
|
|
Program |
Yes |
15 |
|
|
|
|
|
|
|
|
|
||
030 |
Clerk detail link |
9 |
200 |
|
Program |
Yes |
10 |
||
|
|
|
|
|
|
|
|
|
|
011 |
Clerk detail |
10 |
99 × |
99 |
|
Sales |
Yes |
150 |
|
--- |
(periodic total 1) |
10 |
99 × |
99 |
|
Sales |
Yes |
150 |
|
--- |
(periodic total 2) |
10 |
99 × |
99 |
|
Sales |
Yes |
0 |
|
--- |
(daily consolidation) |
10 |
99 × |
99 |
|
Sales |
Yes |
0 |
|
--- |
(periodic 1 consolidation) |
10 |
99 × |
99 |
|
Sales |
Yes |
0 |
|
--- |
(periodic 2 consolidation) |
10 |
99 × |
99 |
|
Sales |
Yes |
0 |
|
Time and attendance files |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
||
019 |
Time and attendance |
16 |
999 |
|
Sales |
Yes |
0 |
||
|
|
|
|
|
|
|
|
|
|
061 |
Employee |
17 |
99 |
|
|
Program |
Yes |
10 |
|
Scanning PLU files |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
||
016 |
Scanning PLU |
58 |
*A |
|
Pgm/Sale |
Yes |
(<-)*C |
||
|
|
|
|
|
|
|
|
||
040 |
Non PLU table |
8 |
100 |
|
Program |
Yes |
(10)*C |
||
|
|
|
|
|
|
|
|
|
|
051 |
Mix & match table |
30 |
99 |
|
|
Pgm/Sale |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 1) |
10 |
99 |
|
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
|
--- |
(periodic total 2) |
10 |
99 |
|
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
|
--- |
(daily consolidation) |
10 |
99 |
|
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 1 consolidation) |
10 |
99 |
|
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
|
|
--- |
(periodic 2 consolidation) |
10 |
99 |
|
|
Sales |
Yes |
0 |
|
|
|
|
|
|
|
|
|
||
070 |
Batch maintenance PLU |
42 |
1000 |
|
Program |
Yes |
(100)*C |
||
|
|
|
|
|
|
|
|
||
071 |
Direct maintenance PLU |
42 |
1000 |
|
Program |
Yes |
(50)*C |
||
|
|
|
|
|
|
|
|
||
076 |
Scanning PLU index |
2 |
S-PLU + 2 |
|
Buffer |
Automatic |
(5002)*C |
||
|
|
|
|
|
|
|
|
||
077 |
One touch NLU table |
7 |
999 |
|
Program |
Yes |
(10)*C |
||
Arrangement file |
|
|
|
|
|
|
|
||
038 |
Arrangement table |
11 |
9999 |
|
Program |
Yes |
0 |
*A: Depend on the model.
*B: Allocate if you select “check tracking pattern” initialization, (refer to page 24 of this manual). *C: Allocate if you select “scanning pattern” initialization, (refer to page 24 of this manual).
Program 5
TE-2200/2400 Dealer's Manual |
25 |
File allocation programming (P5)
File |
File description |
Record |
Max No. |
|
Description |
Attribu- |
Allocat- |
Default |
No. |
length |
of records |
|
tion |
able |
Rec. No. |
||
|
|
|
||||||
|
|
|
|
|
|
|
|
|
Program / message / buffer files |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
022 |
General control |
5 |
37 |
|
|
Program |
No |
37 |
|
|
|
|
|
|
|
|
|
023 |
Special character |
16 |
42 |
|
|
Program |
No |
42 |
|
|
|
|
|
|
|
|
|
024 |
Report header |
12 |
25 |
|
|
Program |
No |
26 |
|
|
|
|
|
|
|
|
|
025 |
Tax table |
74 |
10 |
|
|
Program |
Yes |
4 |
|
|
|
|
|
|
|
|
|
028 |
Set menu table |
60 |
999 |
|
|
Program |
Yes |
(10)*B |
|
|
|
|
|
|
|
|
|
029 |
Batch X/Z |
24 |
10 |
|
|
Program |
Yes |
4 |
|
|
|
|
|
|
|
|
|
032 |
Receipt message |
24 |
42 |
|
|
Program |
Yes |
4 |
|
|
|
|
|
|
|
|
|
033 |
Check endorse message |
40 |
4 |
|
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
034 |
Slip/external printer message |
40 |
42 |
|
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
036 |
Registration buffer |
100 |
1200 |
|
|
Buffer |
Yes |
80 |
|
|
|
|
|
|
|
|
|
039 |
Character recall |
40 |
999 |
|
|
Program |
Yes |
10 |
|
|
|
|
|
|
|
|
|
041 |
Check print |
3 |
9 |
|
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
046 |
Character key table |
6 |
*E |
|
|
Program |
No |
*E |
|
|
|
|
|
|
|
|
|
047 |
Graphic logo |
48 |
168 |
|
|
Program |
Yes |
168 |
|
|
|
|
|
|
|
|
|
049 |
Print buffer (for external printer) |
50 |
600 |
|
|
Buffer |
Yes |
0 |
|
|
|
|
|
|
|
|
|
062 |
Scheduler |
22 |
99 |
|
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
065 |
Order character |
12 |
99 |
|
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
067 |
Graphic logo (for external printer) |
48 |
168 |
|
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
068 |
Watermark print |
48 |
168 |
|
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
073 |
Bottle link table |
4 |
999 |
|
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
074 |
Key table |
24 |
*F |
|
|
Program |
No |
150 |
|
|
|
|
|
|
|
|
|
078 |
Miscellaneous message |
16 |
52 |
*D |
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
079 |
Printing guidance message |
24 |
68 |
*D |
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
080 |
Error message |
16 |
191 |
*D |
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
081 |
Registration guidance message |
16 |
11 |
*D |
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
082 |
X/Z guidance message |
16 |
38 |
*D |
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
083 |
Program guidance message |
16 |
92 |
*D |
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
085 |
Help message |
24 |
199 |
*D |
|
Program |
Yes |
0 |
|
|
|
|
|
|
|
|
|
086 |
Slip print buffer |
40 |
500 |
|
|
Buffer |
Yes |
0 |
*A: Depend on the model.
*B: Allocate if you select “check tracking pattern” initialization, (refer to page 24 of this manual). *C: Allocate if you select “scanning pattern” initialization, (refer to page 24 of this manual).
*D: Allocate these files if you want to change the default message. *E: 67 for TE-2200, 77 for TE-2400Eu, 70 for TE-2400US.
*F: 84 for TE-2200, 112 for TE-2400.
26
Issuing program reading report of program 5 mode
Issuing procedure
PGM 65s 6 s
Mode switch
Report sample
P05.................... — |
Program read symbol |
||||
FILE0001 |
|
|
|
— |
File name |
22bytes |
99 |
99 |
99 |
— |
Sales file record length/No. of records of daily sales/periodic sales 1/periodic sales 2 |
10bytes |
99 |
99 |
99 |
— |
Consolidation file record length/No. of records of daily sales/periodic sales 1/periodic sales 2 |
FILE0002 |
|
|
|
|
|
35bytes |
100 |
-- |
-- — |
Hyphen means no record. |
|
10bytes |
100 |
-- |
-- |
|
|
RAM |
|
20,234 |
— |
Remaining RAM capacity |
|
|
|
|
|
|
|
Program 5
TE-2200/2400 Dealer's Manual |
27 |
File allocation programming (P5)
28
Key allocation (Program 4)
Key allocation program
Programming procedure
By pressing the appropriate key
|
|
|
|
|
|
|
|
See Menu sheet No. section |
|
|
||||||||||||||||
PGM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||
64s6 :000s6 |
|
|
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mode switch |
|
|
|
|
|
|
|
|
Menu sheet number |
|
|
|
|
|
|
|
||||||||||
|
|
This step can be |
|
|
|
|
|
|
|
to other key |
|
|
||||||||||||||
|
|
skipped for |
|
|
|
|
|
|
|
|
|
|
|
|
Set the same function |
|
||||||||||
|
|
transaction key. |
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
6:~ : |
6 :: : |
|
|
|
|
|
|
||||||||||||||||
|
|
|
|
6 s |
||||||||||||||||||||||
|
6 |
|
#-nn |
|||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Appropriate key |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
• Record No. (department/transaction) |
• Function |
code |
|
|||||||||||||||||||||||
• Random code or record No. (flat-PLU) |
|
|
|
|
|
|
|
|
|
|
(white key on the next page) |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
By entering physical key code |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
See Menu sheet No. section |
|
|
|||||||||||||||||||
PGM |
|
|||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||
64s6 : 6 :::s6 |
||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
Mode switch |
|
|
|
|
|
|
|
Menu sheet number |
|
Physical key code |
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(see the next page.) |
This step can be
skipped for to other key transaction key.
6:~ : 6 : :: 6 a 6 s
• Record No. (department/transaction) • Function code
• Random code or record No. (flat-PLU)
Menu sheet number
Menu sheet |
Description |
Description |
number |
(for transaction key) |
(for Dept/flat-PLU) |
0 or skip entering |
Set a function to the 1st ~ 6th menu sheets. |
Set a function to the programmed menu sheet. |
|
|
|
1 |
Set a function to the 1st menu sheet. |
Set a function to the 1st menu sheet. |
|
|
|
2 |
Set a function to the 2nd menu sheet. |
Set a function to the 2nd menu sheet. |
|
|
|
3 |
Set a function to the 3rd menu sheet. |
Set a function to the 3rd menu sheet. |
|
|
|
4 |
Set a function to the 4th menu sheet. |
Set a function to the 4th menu sheet. |
|
|
|
5 |
Set a function to the 5th menu sheet. |
Set a function to the 5th menu sheet. |
|
|
|
6 |
Set a function to the 6th menu sheet. |
Set a function to the 6th menu sheet. |
|
|
|
Program 4
TE-2200/2400 Dealer's Manual |
29 |
Key allocation programming (P4)
Configuration of the physical key layout
TE-2200
RECEIPT |
JOURNAL |
071 |
C |
064 |
062 |
060 |
054 |
048 |
042 |
036 |
030 |
024 |
018 |
FEED |
FEED |
||||||||||||
081 |
076 |
070 |
065 |
063 |
061 |
059 |
053 |
047 |
041 |
035 |
029 |
023 |
017 |
080 |
075 |
069 |
7 |
8 |
9 |
058 |
052 |
046 |
040 |
034 |
028 |
022 |
015 |
079 |
074 |
068 |
4 |
5 |
6 |
057 |
051 |
045 |
039 |
033 |
027 |
014 |
016 |
078 |
073 |
067 |
1 |
2 |
3 |
056 |
050 |
044 |
038 |
032 |
026 |
020 |
021 |
077 |
072 |
066 |
0 |
011 |
012 |
055 |
049 |
043 |
037 |
031 |
025 |
019 |
013 |
TE-2400 for Eu
038 |
045 |
052 |
059 |
066 |
073 |
080 |
087 |
094 |
101 |
108 |
031 |
029 |
026 |
RECEIPT |
JOURNAL |
|
FEED |
FEED |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
037 |
044 |
051 |
058 |
065 |
072 |
079 |
086 |
093 |
100 |
107 |
030 |
028 |
025 |
023 |
019 |
|
036 |
043 |
050 |
057 |
064 |
071 |
078 |
085 |
092 |
099 |
106 |
C |
027 |
024 |
022 |
018 |
|
035 |
042 |
049 |
056 |
063 |
070 |
077 |
084 |
091 |
098 |
105 |
7 |
8 |
9 |
021 |
017 |
|
034 |
041 |
048 |
055 |
062 |
069 |
076 |
083 |
090 |
097 |
104 |
4 |
5 |
6 |
020 |
015 |
|
033 |
040 |
047 |
054 |
061 |
068 |
075 |
082 |
089 |
096 |
103 |
1 |
2 |
3 |
014 |
016 |
|
032 |
039 |
046 |
053 |
060 |
067 |
074 |
081 |
088 |
095 |
102 |
0 |
011 |
012 |
013 |
TE-2400 for US
045 |
052 |
059 |
066 |
073 |
080 |
087 |
094 |
101 |
108 |
038 |
036 |
033 |
030 |
RECEIPT |
JOURNAL |
|
FEED |
FEED |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
044 |
051 |
058 |
065 |
072 |
079 |
086 |
093 |
100 |
107 |
037 |
035 |
032 |
029 |
023 |
019 |
|
043 |
050 |
057 |
064 |
071 |
078 |
085 |
092 |
099 |
106 |
C |
027 |
031 |
028 |
022 |
018 |
|
042 |
049 |
056 |
063 |
070 |
077 |
084 |
091 |
098 |
105 |
7 |
8 |
9 |
027 |
021 |
017 |
|
041 |
048 |
055 |
062 |
069 |
076 |
083 |
090 |
097 |
104 |
4 |
5 |
6 |
026 |
020 |
015 |
|
|
|
|
|
|
|
|
|
|
|
1 |
2 |
3 |
|
|
|
|
040 |
047 |
054 |
061 |
068 |
075 |
082 |
089 |
096 |
103 |
025 |
014 |
016 |
||||
039 |
046 |
053 |
060 |
067 |
074 |
081 |
088 |
095 |
102 |
0 |
011 |
012 |
024 |
013 |
The shadowed key cannot be programmed with any other functions.
<00>, <000>, and <.> functions are only allocated to <#011> or <#012> keys.
30