AZ948
16 AMP LOW PROFILE POWER RELAY
FEATURES
•High power switching (4000 VA)
•High sensitivity, 128 mW pickup
•Low profile (less than .5" height)
•SPST (1 Form A)
•Epoxy sealed version available
•DC coils up to 100 VDC
•UL file E44211; CSA file LR 702514
CONTACTS
Arrangement |
SPST (1 Form A) |
|
|
Ratings |
Resistive load: |
Standard |
Max. switched power: 300 W, 2500 VA |
|
Max. switched current: 10 A |
|
Max. switched voltage: 250 VAC/125 VDC |
Heavy Duty |
Max. switched power: 480 W, 4000 VA |
|
Max. switched current: 16 A |
|
Max. switched voltage: 250 VAC/125 VDC* |
|
*Note: If switching voltage is greater than 30VDC, |
|
special precautions must be taken. Please contact |
|
the factory. |
|
|
Rated Load |
|
UL |
Standard: 10 A at 30 VDC/250 VAC |
|
Heavy Duty: 10 A at 30 VDC |
|
16 A at 250 VAC |
|
|
Min. Load |
5 VDC, 0.1 A |
|
|
Material |
Silver alloy |
|
|
Resistance |
< 50 milliohms initially |
|
(24 V, 1 A voltage drop method) |
COIL
Power |
|
|
At Pickup Voltage |
200 mW |
|
(typical) |
|
|
Max. Continuous |
1.8 |
W at 20°C (68°F) |
Dissipation |
1.3 |
W at 40°C (104°F) |
Temperature Rise |
16°C (29°F) at nominal coil voltage |
|
|
|
|
Temperature |
Max. 115°C (239°F) |
|
|
|
|
NOTES
1.All values at 20°C (68°F).
2.Relay may pull in with less than “Must Operate” value.
3.Specifications subject to change without notice.
GENERAL DATA
Life Expectancy |
Minimum operations |
Mechanical |
1 x 107 |
Electrical |
1 x 105 at rated load |
Operate Time (typical) |
10 ms at nominal coil voltage |
|
|
Release Time (typical) |
4 ms at nominal coil voltage |
|
(with no coil suppression) |
|
|
Dielectric Strength |
1500 Vrms coil to contact |
(at sea level for 1 min.) |
1000 Vrms contact to contact |
|
|
Insulation |
100 megohms min. at 20°C, 500 VDC, |
Resistance |
50% RH |
|
|
Dropout |
Greater than 10% of nominal coil voltage |
|
100 V coil ≥ 6 VDC |
|
|
Ambient Temperature |
At nominal coil voltage |
Operating |
-40°C (-40°F) to 70°C (158°F) 3-48 V coils |
|
-40°C (-48°F) to 60°C (140°F) 100 V coil |
Storage |
-40°C (-40°F) to 115°C (239°F) |
|
|
Vibration |
0.062" DA at 10–55 Hz |
|
|
Shock |
10 g |
|
|
Enclosure |
P.B.T. polyester |
|
|
Terminals |
Tinned copper alloy, P.C. |
|
|
Max. Solder Temp. |
270°C (518°F) |
|
|
Max. Solder Time |
5 seconds |
|
|
Max. Solvent Temp. |
80°C (176°F) |
|
|
Max. Immersion Time |
30 seconds |
|
|
Weight |
8 grams |
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
2000-01-03