AZ695
SENSITIVE SUBMINIATURE RELAY
FEATURES
•Extremely small footprint utilizing only 0.18 square inch of PCB area
•Thin vertical profile only 0.256" wide
•1 Form A contact with up to 5 Amp switching capability
•High sensitivity, 100 mW pickup
•Dielectric strength 3000 Vrms contact to coil
•Coils to 24 VDC
•Epoxy sealed for automatic wave soldering and cleaning
•Sockets are also available
•UL file E44211; CSA file 74461
CONTACTS
Arrangement |
SPST (1 Form A) |
|
|
Ratings |
Resistive load: |
|
Max. switched power: 150 W or 1250 VA |
|
Max. switched current: 5 A |
|
Max. switched voltage: 150* VDC or 250 VAC |
|
Inductive load (p.f. = 0.40, L/R = 7 ms) |
|
2 A at 250 VAC, 30 VDC |
|
UL Rating: 5 A at 30 VDC or 250 VAC |
|
1/10 HP 120 VAC |
|
Note: If switching voltage is greater than 30 VDC, special |
|
precautions must be taken. Please contact the factory. |
|
|
Material |
Options: |
|
Silver cadmium oxide |
|
Silver cadmium oxide with gold plating |
|
|
Resistance |
< 30 milliohms initially |
|
(at rated current, voltage drop method) |
COIL
Power |
|
At Pickup Voltage |
100 mW |
(typical) |
|
Max. Continuous |
550 mW at 20°C (68°F) ambient |
Dissipation |
420 mW at 40°C (104°F) ambient |
Temperature Rise |
25°C (45°F) at nominal coil voltage |
|
|
Temperature |
Max. 105°C (221°F) |
|
|
NOTES
1.All values at 20°C (68°F).
2.Relay may pull in with less than “Must Operate” value.
3.Minimum permissible contact load: SCO contact: 100 mA at 5 VDC
SCO contact with gold plating: 10 mA at 5 VDC
4.Specifications subject to change without notice.
GENERAL DATA
Life Expectancy |
Minimum operations |
Mechanical |
20 million operations |
Electrical |
1 X 105 at 5 A, 30 VDC or 250 VAC |
Operate Time (typical) |
6 ms at nominal coil voltage |
|
|
Release Time (typical) |
3 ms at nominal coil voltage |
|
(with no coil suppression) |
|
|
Dielectric Strength |
750 Vrms between open contacts |
(at sea level for 1 min.) |
3000 Vrms contact to coil |
|
|
Insulation |
100 megohms min. at 20°C, 500 VDC, |
Resistance |
50% RH |
|
|
Dropout |
Greater than 10% of nominal coil voltage |
|
|
Ambient Temperature |
At nominal coil voltage |
Operating |
-40°C (-40°F) to 70°C (158°F) |
Storage |
-40°C (-40°F) to 105°C (221°F) |
|
|
Vibration |
0.062" DA at 10–55 Hz |
|
|
Shock |
10 g |
|
|
Enclosure |
P.B.T. polyester |
|
|
Terminals |
Tinned copper alloy, P.C. |
|
|
Max. Solder Temp. |
270°C (518°F) |
|
|
Max. Solder Time |
5 seconds |
|
|
Max. Solvent Temp. |
80°C (176°F) |
|
|
Max. Immersion Time |
30 seconds |
|
|
Weight |
3 grams |
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
2000-08-31