AZ2280
30 AMP MINIATURE POWER RELAY
FEATURES
•Quick-connect leads for contacts and coil
•1 Form A, B and C contacts available
•AC and DC coils available
•Available with epoxy seal
•UL and Canadian file E44211
GENERAL DATA
CONTACTS
Arrangement SPST (1 Form A, or B)
SPDT (1 Form C)
Ratings Resistive load:
Max. switched power: 900 W or 7200 VA
Max. switched current:30 A (Form A N.O.) 15 A (Form B N.O.) 20 A (Form C N.O.) 15 A (Form C N.O.
Max. switched voltage: 277 VAC, 30 VDC
UL, CUR 30/15 A @ 240 VAC, gen use (NO/NC, Form A or B) 20/10 A @ 240 VAC, gen use (NO/NC, Form C) 20/10 A @ 28 VDC, res (NO/NC, Form A or B)
1.0/.25 Hp @ 120 VAC, (NO/NC, Form A or B)
2.0/.50 Hp @ 240 VAC, (NO/NC, Form A, B or C) 5/3 A @ 240 VAC, tungsten (NO/NC, Form A, B or C)
6/3 A @ 277 VAC, gen use (NO/NC, Form A, B or C) 6/3 A @ 277 VAC, ballast (NO/NC, Form A, B or C)
Minimum
Load 5 VDC, 0.1 A
Material Silver alloy
Resistance < 50 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Power |
|
At Pickup Voltage |
DC: 500 mW |
(typical) |
AC: 1.4 VA |
Max. Continuous |
DC: 1.7 W at 20°C (68°F) |
Dissipation |
AC: 2.7 VA at 20°C (68°F) |
Temperature Rise |
38°C (68°F) |
|
|
Temperature |
Max. 105°C (221°F) |
Life Expectancy |
Minimum operations |
Mechanical |
1 x 107 |
Electrical |
1 x 105 at rated load |
Operate Time |
15 ms at nominal coil voltage |
|
|
Release Time |
10 ms at nominal coil voltage |
|
(with no coil suppression) |
|
|
Dielectric Strength |
1500 Vrms contact to contact |
(at sea level for 1 min.) |
2500 Vrms contact to coil |
|
|
Insulation Resistance |
1000 megohms min. at 500 VDC, 20°C |
|
50% RH |
|
|
Dropout |
DC: Greater than 10%of nominal coil voltage |
|
AC: Greater than 20%of nominal coil voltage |
|
|
Ambient Temperature |
At nominal coil voltage |
Operating |
-55°C (-67°F) to 85°C (185°F) |
Storage |
-55°C (-67°F) to 105°C (221°F) |
|
|
Vibration |
0.062" DA at 10–55 Hz |
|
|
Shock |
10 g |
|
|
Enclosure |
P.B.T. polyester |
|
|
Terminals |
Tinned copper alloy, Quick Connects |
|
|
Max. Solder Temp. |
270°C (518°F) |
|
|
Max. Solder Time |
5 seconds |
|
|
Max. Solvent Temp. |
80°C (176°F) |
|
|
Max. Immersion Time |
30 seconds |
|
|
Weight |
36 grams |
NOTES
1.All values at 20°C (68°F).
2.Relay may pull in with less than “Must Operate” value.
3.Specifications subject to change without notice.
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
1999-03-11