AZ832
POLARIZED DIP RELAY SINGLE SIDE STABLE
FEATURES
•Low profile for compact board spacing
•DC coils to 48 VDC
•High sensitivity, 96 mW pickup
•Life expectancy to 20 million operations
•High switching capacity, 150 W, 250 VA
•Fits standard 16 pin IC socket
•Epoxy sealed for automatic wave soldering and cleaning
•Meets FCC Part 68.302 1500 V lightning surge
•Meets FCC Part 68.304 1000 V dielectric
•UL file E43203; CSA file LR702225
CONTACTS
Arrangement |
DPDT (2 Form C) |
||
|
Bifurcated crossbar contacts |
||
|
|
||
Ratings |
Resistive load: |
||
|
Max. switched power: 150 W or 250 VA |
||
|
Max. switched current: 5 A |
||
|
Max. switched voltage: 250 VDC or 250 VAC |
||
|
*Note: If switching voltage is greater than 30 VDC, |
||
|
special precautions must be taken. Please contact |
||
|
the factory. |
|
|
|
|
|
|
Rated Load |
|
|
|
UL/CSA |
2 A at |
25 |
VDC resistive |
|
1 A at |
120 |
VAC resistive |
|
|
||
Material |
Gold plated silver against palladium silver. |
||
|
Gold plated palladium silver against palladium |
||
|
silver (Suffix “A”) |
||
|
|
||
Resistance |
< 50 milliohms initially |
||
|
|
|
|
COIL
Power |
|
At Pickup Voltage |
Standard coil: 128 mW |
(typical) |
Sensitive coil: 96 mW |
Max. Continuous |
0.9 W at 20°C (68°F) |
Dissipation |
|
Temperature |
Max. 115°C (239°F) |
|
|
NOTES
1.All values at 20°C (68°F).
2.Relay may pull in with less than “Must Operate” value.
3.Relay has fixed coil polarity.
4.For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays.
5.Relay adjustment may be affected if undue pressure is exerted on relay case.
6.Specifications subject to change without notice.
GENERAL DATA
Life Expectancy |
Minimum operations |
Mechanical |
2 x 107 |
Electrical |
1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC |
|
2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC |
Operate Time (typical) |
3 ms at nominal coil voltage |
|
|
Release Time (typical) |
2 ms at nominal coil voltage |
|
(with no coil suppression) |
|
|
Bounce (typical) |
3 ms |
|
|
Dielectric Strength |
1500 Vrms contact to coil |
(at sea level) |
1000 Vrms between contact sets |
|
1000 Vrms across contacts |
|
Meets FCC Part 68.302 lightning surge |
|
Meets FCC Part 68.304 V dielectric |
|
|
Insulation Resistance |
1000 megohms min. at 20°C, 500 VDC, |
|
50% RH |
|
|
Dropout |
Greater than 10% of nominal coil voltage |
|
|
Ambient Temperature |
At nominal coil voltage |
Operating |
-40°C (-40°F) to 85°C (185°F) |
Storage |
-40°C (-40°F) to 115°C (239°F) |
|
|
Vibration |
50 g at 10–500 Hz |
|
|
Shock |
50 g |
|
|
Enclosure |
P.B.T. polyester |
|
|
Terminals |
Tinned copper alloy, P.C. |
|
|
Max. Solder Temp. |
270°C (518°F) |
|
|
Max. Solder Time |
5 seconds |
|
|
Max. Solvent Temp. |
80°C (176°F) |
|
|
Max. Immersion Time |
30 seconds |
|
|
Weight |
5 grams |
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
2000--11-17