U
RX-V663
AV Receiver
OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
CAUTION |
RISK OF ELECTRIC SHOCK |
DO NOT OPEN |
CAUTION: TO REDUCE THE RISK OF |
ELECTRIC SHOCK, DO NOT REMOVE |
COVER (OR BACK). NO USER-SERVICEABLE |
PARTS INSIDE. REFER SERVICING TO |
QUALIFIED SERVICE PERSONNEL. |
•Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
1Read Instructions – All the safety and operating instructions should be read before the product is operated.
2Retain Instructions – The safety and operating instructions should be retained for future reference.
3Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
4Follow Instructions – All operating and use instructions should be followed.
5Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
6Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
8Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
9A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to
overturn.
10Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
11Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
12Grounding or Polarization – This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
13Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
14Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
15Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
16Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
17Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
18Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a)When the power-supply cord or plug is damaged,
b)If liquid has been spilled, or objects have fallen into the product,
c)If the product has been exposed to rain or water,
Caution-i En
d)If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,
e)If the product has been dropped or damaged in any way, and
f)When the product exhibits a distinct change in perfor-
mance - this indicates a need for service.
20Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
21Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
22Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.
23Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
IMPORTANT SAFETY INSTRUCTIONS
24Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
MAST |
ANTENNA |
|
LEAD IN |
|
WIRE |
GROUND |
|
CLAMP |
|
|
ANTENNA |
|
DISCHARGE UNIT |
|
(NEC SECTION 810–20) |
ELECTRIC |
|
SERVICE |
|
EQUIPMENT |
GROUNDING CONDUCTORS |
|
|
|
(NEC SECTION 810–21) |
|
GROUND CLAMPS |
|
POWER SERVICE GROUNDING |
|
ELECTRODE SYSTEM |
|
(NEC ART 250. PART H) |
NEC – NATIONAL ELECTRICAL CODE |
|
FCC INFORMATION (for US customers)
1IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.
3NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave., Buena Park, CA 90620.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
Caution-ii En
Caution: Read this before operating your unit.
1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.
2Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.
3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.
4Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.
5Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:
–other components, as they may cause damage and/or discoloration on the surface of this unit.
–burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.
–containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.
6Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.
7Do not plug in this unit to a wall outlet until all connections are complete.
8Do not operate this unit upside-down. It may overheat, possibly causing damage.
9Do not use force on switches, knobs and/or cords.
10When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.
11Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
12Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.
13To prevent damage by lightning, keep the power cord and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm.
14Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons.
15When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.
16Install this unit near the AC outlet and where the AC power plug can be reached easily.
17Be sure to read the “Troubleshooting” section on common operating errors before concluding that this unit is faulty.
18Before moving this unit, press LSYSTEM OFF to set this unit to the standby mode, and then disconnect the AC power plug from the AC wall outlet.
19VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC wall outlet. Voltages are:
Asia model ............................ 220/230–240 V AC, 50/60 Hz
General model ........ |
110/120/220/230–240 V AC, 50/60 Hz |
20The batteries shall not be exposed to excessive heat such as sunshine, fire or like.
21Excessive sound pressure from earphones and headphones can cause hearing loss.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by LSYSTEM OFF. In this state, this unit is designed to consume a very small quantity of power.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide slot and fully insert.
This Class B digital apparatus complies with Canadian ICES-003.
POUR LES CONSOMMATEURS CANADIENS
Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IMPORTANT
Please record the serial number of this unit in the space below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.
Caution-iii En
Contents
INTRODUCTION |
|
Features ................................................................... |
2 |
Supplied accessories .................................................. |
2 |
Notice ....................................................................... |
3 |
Getting started ........................................................ |
4 |
Quick start guide .................................................... |
5 |
PREPARATION |
|
Connections ........................................................... |
10 |
Optimizing the speaker setting for your listening |
|
room (YPAO) .................................................... |
32 |
Using AUTO SETUP .............................................. |
32 |
BASIC OPERATION |
|
Selecting the SCENE templates........................... |
37 |
Selecting the desired SCENE template to the SCENE |
|
buttons ................................................................. |
37 |
Creating your original SCENE templates................ |
40 |
Using the remote control for the SCENE feature .... |
41 |
Playback ................................................................ |
42 |
Basic procedure ....................................................... |
42 |
Selecting the MULTI CH INPUT component......... |
43 |
Selecting the front speaker set ................................. |
43 |
Selecting audio input jacks (AUDIO SELECT)...... |
44 |
Displaying the current status of this unit on a video |
|
monitor ................................................................ |
44 |
Using your headphones............................................ |
45 |
Muting the audio output........................................... |
45 |
Playing video sources |
|
in the background of an audio source.................. |
45 |
Displaying the input source information ................. |
46 |
Using the sleep timer ............................................... |
47 |
Sound field programs .......................................... |
48 |
Selecting sound field programs ............................... |
48 |
Sound field program descriptions............................ |
48 |
Enjoying unprocessed input sources |
|
(Straight decoding mode) .................................... |
51 |
Using audio features ............................................. |
52 |
Adjusting the speaker level...................................... |
52 |
Enjoying pure hi-fi sound ........................................ |
52 |
Adjusting the tonal quality....................................... |
52 |
FM/AM tuning ...................................................... |
53 |
Overview.................................................................. |
53 |
Basic tuning operations............................................ |
53 |
Using station preset feature ..................................... |
54 |
XM Satellite Radio tuning ................................... |
57 |
Connecting the XM Mini-Tuner Dock .................... |
57 |
Activating XM Satellite Radio ................................ |
58 |
Basic XM Satellite Radio operations....................... |
58 |
Setting the XM Satellite Radio |
|
preset channels .................................................... |
60 |
Displaying the XM Satellite Radio |
|
information .......................................................... |
61 |
SIRIUS Satellite Radio™ tuning ......................... |
62 |
Connecting the SiriusConnect™ tuner .................... |
62 |
Activating SIRIUS Satellite Radio™ |
|
subscription ......................................................... |
63 |
Basic SIRIUS Satellite Radio™ operations ............ |
63 |
Setting the SIRIUS Satellite Radio™ |
|
preset channels .................................................... |
65 |
Setting the Parental Lock......................................... |
65 |
Displaying the SIRIUS Satellite Radio™ |
|
information .......................................................... |
67 |
Using iPod™ .......................................................... |
68 |
Controlling iPod™................................................... |
68 |
Using Bluetooth™ components............................ |
70 |
Pairing the Bluetooth™ adapter and your |
|
Bluetooth™ component....................................... |
70 |
Playback of the Bluetooth™ component................. |
70 |
Recording............................................................... |
71 |
ADVANCED OPERATION |
|
Advanced sound configurations........................... |
72 |
Changing sound field parameter settings................. |
72 |
Selecting decoders ................................................... |
78 |
Customizing this unit (MANUAL SETUP)......... |
80 |
Using SET MENU................................................... |
84 |
1 BASIC MENU...................................................... |
85 |
2 VOLUME MENU ................................................ |
89 |
3 SOUND MENU.................................................... |
90 |
4 INPUT MENU...................................................... |
93 |
5 OPTION MENU................................................... |
96 |
Remote control features...................................... |
100 |
Controlling this unit, a TV, or other components.......... |
100 |
Setting remote control codes ................................. |
102 |
Using multi-zone configuration.......................... |
103 |
Connecting Zone 2................................................. |
103 |
Controlling Zone 2................................................. |
104 |
Advanced setup.................................................... |
106 |
Using the advanced setup ...................................... |
106 |
ADDITIONAL INFORMATION |
|
Troubleshooting................................................... |
110 |
Resetting the system............................................ |
119 |
Glossary................................................................ |
120 |
Sound field program information...................... |
123 |
Specifications ....................................................... |
124 |
Index ..................................................................... |
126 |
APPENDIX |
|
(at the end of this manual) |
|
Front panel................................................................ |
i |
Remote control ....................................................... |
ii |
List of remote control codes ................................. |
iii |
“ASPEAKERS” or “4DVD” (example) indicates the name of the parts on the front panel or the remote control. Refer to the attached sheet or the pages at the end of this manual for the information about each position of the parts.
INTRODUCTION |
|
|
|
|
|
PREPARATION |
|
|
|
|
|
OPERATION |
BASIC |
|
|
|
|
OPERATION |
ADVANCED |
|
|
|
|
INFORMATION |
ADDITIONAL |
|
|
APPENDIX
English
1 En
Built-in 7-channel power amplifier
Minimum RMS output power
(20 Hz to 20 kHz, 0.06% THD, 8 Ω) Front: 95 W + 95 W
Center: 95 W Surround: 95 W + 95 W
Surround back: 95 W + 95 W
SCENE function
Preset SCENE templates for various situations
SCENE templates for customizing capability
Controlling Yamaha SCENE control signal support component (some models only) working with the SCENE function
Sound field programs
Proprietary Yamaha technology for the creation of sound fields
Compressed Music Enhancer mode
Virtual CINEMA DSP
SILENT CINEMA
Digital audio decoders
Dolby TrueHD, Dolby Digital Plus decoder
DTS-HD Master Audio, DTS-HD High Resolution Audio decoder
Dolby Digital/Dolby Digital EX decoder
DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS 96/24 decoder
Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic IIx decoder
Neural Surround decoder
Radio tuners
FM/AM tuning capability
XM Satellite Radio tuning capability (using XM Mini-Tuner and Home Dock, sold separately)
SIRIUS Satellite Radio™ tuning capability (using SiriusConnect tuner, sold separately)
HDMI™ (High-Definition Multimedia Interface)
HDMI interface for standard, enhanced or
high-definition video as well as multi-channel digital audio based on HDMI version 1.3a (HDMI is Licensed by HDMI Licensing, LLC.)
–Automatic audio and video synchronization (lip sync) information capability
–Deep Color video signal (30/36 bit) transmission capability
–“x.v.Color” video signal transmission capability
–High refresh rate and high resolution video signals capability
–High definition digital audio format signals capability
HDCP (High-bandwidth Digital Content Protection System) licensed by Digital Content Protection, LLC.
Analog video to HDMI digital video up-conversion (composite video ↔ S-video ↔ component video → HDMI
digital video) capability for monitor out
DOCK terminal
DOCK terminal to connect a Yamaha iPod universal dock (such as YDS-10, sold separately) or Bluetooth adapter (such as YBA-10, sold separately)
Other features
YPAO (Yamaha Parametric Room Acoustic Optimizer) for automatic speaker setup
192-kHz/24-bit D/A converter
OSD (on-screen display) menus that allow you to optimize this unit to suit your individual audiovisual system
5.1 or 7.1-channel additional input jacks for discrete multichannel input
Component video input/output capability includes
(3 COMPONENT VIDEO INs and 1 MONITOR OUT)
Digital video signal conversion (composite video ↔ S-video ↔ component video) capability for monitor out
Pure Direct mode for pure hi-fi sound for all sources
Adaptive dynamic range controlling capability
Adaptive DSP effect level controlling capability
iPod controlling capability
Remote control with preset remote control codes capability
Zone 2 custom installation facility
Bi-amplification connection capability
Sleep timer
Check that you received all of the following parts. |
|
Remote control |
AM loop antenna |
Batteries (2) (AAA, R03, UM-4) |
Indoor FM antenna |
Optimizer microphone |
|
2 En
About this manual
•yindicates a tip for your operation.
•Some operations can be performed by using either the buttons on the front panel or the ones on the remote control. In case the button names differ between the front panel and the remote control, the button name on the remote control is given in parentheses.
•This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority.
•“ASPEAKERS” or “4DVD” (example) indicates the name of the parts on the front panel or the remote control. Refer to the attached sheet or the pages at the end of this manual for the information about each position of the parts.
•The symbol “ ” with page number(s) indicates the corresponding reference page(s).
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the
most out of your equipment by playing it at a safe
level. One that lets the sound come through loud and
clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive
hearing. Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent No’s: 5,451,942;5,956,674;5,974,380;5,978,762;6,226,616;6,487,535 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademark of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
iPod™
“iPod” is a trademark of Apple Inc., registered in the U.S. and other countries.
Bluetooth™
Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement.
“HDMI”, the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing LLC.
x.v.Color™
“x.v.Color” is a trademark of Sony Corporation.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
The XM name and related logos are registered trademarks of XM Satellite Radio Inc.
Neural Surround™ name and related logos are trademarks owned by Neural Audio Corporation.
©2006 SIRIUS Satellite Radio Inc. “SIRIUS”, “SiriusConnect”, the SIRIUS dog logo, channel names and logos are trademarks of SIRIUS Satellite Radio Inc.
INTRODUCTION
English
3 En
■ Installing batteries in the remote control
1 3
2
1Take off the battery compartment cover.
2Insert the two supplied batteries
(AAA, R03, UM-4) according to the polarity markings (+ and –) on the inside of the battery compartment.
3Snap the battery compartment cover back into place.
Notes
•Change all of the batteries if you notice that the operation range of the remote control decreases.
•Do not use an old battery and a new one together.
•Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.
•If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
•Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.
•If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries and set up the remote control code.
■VOLTAGE SELECTOR
(Asia and General models only)
Caution
The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local voltage BEFORE plugging the power cable into the AC wall outlet. Improper setting of the VOLTAGE SELECTOR may cause damage to this unit and create a potential fire hazard.
Rotate the VOLTAGE SELECTOR clockwise or counterclockwise to the correct position using a straight slot screwdriver.
Voltages are as follows:
Asia model ................... |
220/230–240 V AC, 50/60 Hz |
General model |
|
..................... |
110/120/220/230–240 V AC, 50/60 Hz |
VOLTAGE |
|
SELECTOR |
|
230- |
Voltage indication |
240V |
|
4 En
The following steps describe the easiest way to enjoy DVD movie playback in your home theater. See pages 11 to 15 for
details of the speaker placement.
Front right
speaker
Video monitor
Subwoofer
Front left
speaker Surround right speaker
Center
speaker
Surround back right speaker
DVD player
Surround back left speaker
Surround left speaker
Step 1: Set up your speakers
Prepare the following items. |
|
Speakers |
|
Front speakers ................................... |
x 2 |
Center speaker .................................. |
x 1 |
Surround speakers ............................ |
x 4 |
Select magnetically shielded speakers. The minimum required speakers are two front speakers. The priority of the requirement of other speakers is as follows:
1.Two surround speakers
2.Center speaker
3.One (or two) surround back speaker(s)
Active subwoofer ................................... |
x 1 |
Select an active subwoofer equipped with an RCA |
|
input jack. |
|
Speaker cables ....................................... |
x 7 |
Subwoofer cable .................................... |
x 1 |
P. 6
Step 2: Connect your DVD player and other components
P. 7
Step 3: Press SCENE 1 button
Select a monaural RCA cable. |
|
DVD player .............................................. |
x 1 |
Select DVD player equipped with coaxial digital |
|
audio output jack and composite video output |
|
jack. |
|
Video monitor ......................................... |
x 1 |
Select a TV monitor, video monitor or projector equipped with a composite video input jack.
Video cable ............................................. |
x 2 |
Select an RCA composite video cable. |
|
Digital coaxial audio cable .................... |
x 1 |
y
You can also connect two subwoofers to this unit. In this case, prepare two active subwoofers and subwoofer cables.
P. 8
Enjoy DVD playback!
INTRODUCTION
English
5 En
Quick start guide
|
Be sure to connect the left channel (L), right channel |
|||
Step 1: Set up your speakers |
||||
(R), “+” (red) and “–” (black) properly. |
|
|||
Place your speakers in the room and connect them to this |
Front speakers and center speaker |
|||
unit. |
|
|
|
|
PRE OUT SUBWOOFER 1 jack |
Loosen |
Insert |
Tighten |
|
|
|
|
|
|
AUDIO |
|
|
|
|
|
MULTI CH INPUT |
|
|
PRE OUT |
CENTER |
|
DOCK |
VIDEO |
|
|
VIDEO |
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
FRONT (8CH) |
|
CENTER |
|
|
|
SINGLE |
|
|
|
|
|
|
|
|
|
|
||
|
|
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD |
IN |
MD/ |
OUT |
DVD |
DTV/CBL |
IN |
OUT |
IN |
OUT |
SB (8CH) |
SURROUND |
SUB |
ZONE 2 |
FRONT |
SURROUND |
SUR. BACK |
1 |
2 |
S VIDEO |
|
IN |
OUT |
|
IN |
|
OUT |
MONITOR |
|
|
|
|
(PLAY) CD-R (REC) |
|
DVR |
VCR |
|
WOOFER |
SUBWOOFER |
DVD |
DTV/CBL |
|
DVR |
|
VCR |
|
OUT |
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HDMI |
OUT |
|
|
|
|
|
|
|
|
|
COMPONENT VIDEO |
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PR |
A |
PB |
Y |
PR |
B |
PB |
|
Y |
|
|
|
|
|
|
DVD |
DTV/CBL |
CD |
DVD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SIRIUS |
XM |
|
|
|
1 |
2 |
3 |
COAXIAL |
4 |
|
DVD |
|
DTV/CBL |
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
OPTICAL |
|
|
|
|
IN1 |
|
IN2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANTENNA |
|
|
|
DIGITAL INPUT |
|
|
|
SPEAKERS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C |
|
|
|
||||
|
|
|
|
FRONT B/ZONE B/ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MONITOR OUT |
|
|
DVR |
|
||||||||
|
|
|
|
|
|
ZONE 2/PRESENCE |
|
FRONT A |
CENTER |
SURROUND |
SURROUND BACK/BI-AMP |
|
|
|
|
|
|
|
AC OUTLETS |
|
|
|
|
|
|||||||
|
|
AM |
|
|
|
R EXTRA SP L |
|
R |
L |
|
|
R |
L |
|
R |
L |
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SWITCHED |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
120V 80Hz |
|
|
|
|
|
|
|
GND |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100W MAX. TOTAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.8A MAX. TOTAL |
|
|
|
|
|
||
|
|
FM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
75Ω |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UNBAL. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
REMOTE |
|
TRIGGER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+12V |
|
|
|
|
|
|
|
|
|
|
|
|
SINGLE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN |
OUT |
15mA MAX. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speaker terminals
1Place your speakers and subwoofer in the room.
To the front right |
To the center speaker |
speaker |
|
To the front left speaker
2 Connect speaker cables to each speaker.
Surround and surround back speakers
Be sure to connect the “+” (red) and “–” (black) properly. Cables are colored or shaped differently, perhaps with a stripe, groove or ridge. Connect the striped (grooved, etc.) cable to the “+” (red) terminals of this unit and your speaker. Connect the plain cable to the “–” (black) terminals.
3Connect each speaker cable to the corresponding speaker terminal of this unit.
1 |
2 |
|
3 |
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1Make sure that this unit and the subwoofer are unplugged from the AC wall outlets.
2Twist the exposed wires of the speaker cables together to prevent short circuits.
3Do not let the bare speaker wires touch each other.
4Do not let the bare speaker wires touch any metal part of this unit.
To the surround |
To the surround |
right speaker |
back left speaker |
To the surround |
To the surround |
left speaker |
back right speaker |
4Connect the subwoofer cable to the SUBWOOFER PRE OUT 1 jack of this unit and the input jack of the subwoofer.
Subwoofer |
|
AV receiver |
|
|
|
|
|
DOCK |
VIDE |
PRE OUT |
|
CENTER |
|
|
SINGLE |
|
|
||
|
|
|
|
S VID |
|
|
1 |
2 |
DVD |
|
|
|
||
RROUND SUR. |
BACK |
SUBW |
OOFER |
|
|
|
|
|
Input jack
Subwoofer cable |
SUBWOOFER PRE |
|
OUT 1 jack |
y
You can also connect another subwoofer to the SUBWOOFER PRE OUT 2 jack.
6 En
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIDEO MONITOR OUT jack |
||||||||||
DVD DIGITAL INPUT COAXIAL jack |
|
|
|
|
DVD VIDEO jack |
|
|
|
|
|
||||||||||||||||
|
|
|
AUDIO |
|
|
|
|
|
MULTI CH INPUT |
|
|
PRE OUT |
CENTER |
|
DOCK |
VIDEO |
|
VIDEO |
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
FRONT (8CH) |
|
CENTER |
|
|
SINGLE |
|
|
|
|
|
|
|
|
|
||
|
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD |
IN |
MD/ OUT |
DVD |
DTV/CBL |
IN |
OUT |
IN |
OUT |
SB (8CH) |
SURROUND |
SUB |
ZONE 2 |
FRONT |
SURROUND SUR. BACK |
1 |
2 |
S VIDEO |
IN |
OUT |
|
IN |
|
OUT |
MONITOR |
|
|
(PLAY) CD-R (REC) |
DVR |
|
VCR |
|
WOOFER |
SUBWOOFER |
DVD |
DTV/CBL |
DVR |
|
VCR |
|
OUT |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
HDMI |
OUT |
|
|
|
|
|
|
|
COMPONENT VIDEO |
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DVD |
DTV/CBL |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PR |
A PB |
Y |
PR |
B |
PB |
|
Y |
|
|
|
DVD |
DTV/CBL |
CD |
DVD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SIRIUS |
XM |
|
1 |
2 |
3 |
4 |
|
|
DVD |
|
DTV/CBL |
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OPTICAL |
|
|
COAXIAL |
|
|
IN1 |
|
IN2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANTENNA |
|
DIGITAL INPUT |
|
|
|
SPEAKERS |
|
|
|
|
|
|
|
|
|
|
|
|
C |
|
|
|
|||
|
|
FRONT B/ZONE B/ |
|
|
|
|
|
|
|
|
|
|
|
|
|
MONITOR OUT |
|
|
DVR |
|
||||||
|
|
|
ZONE 2/PRESENCE |
FRONT A |
CENTER |
SURROUND |
SURROUND BACK/BI-AMP |
|
|
|
|
|
AC OUTLETS |
|
|
|
|
|
||||||||
|
AM |
|
R EXTRA SP L |
|
R |
L |
|
|
R |
L |
|
R |
L |
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SWITCHED |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
120V 80Hz |
|
|
|
|
|
|
GND |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100W MAX. TOTAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.8A MAX. TOTAL |
|
|
|
|
|
FM 75Ω
UNBAL.
REMOTE TRIGGER
OUT
|
+12V |
SINGLE |
IN |
OUT 15mA MAX. |
Quick start guide
3Connect the video cable to the VIDEO MONITOR OUT jack of this unit and the video input jack of your video monitor.
Video monitor |
|
|
AV receiver |
||||
|
|
|
|
|
|
|
|
|
VIDEO |
|
|
|
|
|
|
|
|
|
|
IN |
|
OUT |
MONITOR |
IN |
|
OUT |
VCR |
OUT |
|||
DVR |
|
|
|||||
|
|
ONENT VIDEO |
|
|
|||
|
COMP |
DTV/CBL |
Y |
||||
DVD |
PR |
|
B |
PB |
|||
Y |
|
|
|
||||
PB |
|
|
|
|
|
||
|
|
|
|
|
C |
DVR |
|
Video input jack |
|
|
|
|
|
|
VIDEO |
|
|
|
|
|
|
|
MONITOR OUT |
Video cable |
|
|
|
jack |
INTRODUCTION
Make sure that this unit and the DVD player are unplugged from the AC wall outlets.
1Connect the digital coaxial audio cable to the digital coaxial audio output jack of your DVD player and the DVD DIGITAL INPUT COAXIAL jack of this unit.
|
|
|
|
|
AV receiver |
|
|
||||
DVD player |
|
|
|
|
|
|
|
|
|
|
M |
|
|
|
|
|
|
|
|
|
|
|
FRONT (8CH |
|
AUDIO |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
OUT |
IN |
OUT |
SB (8CH |
|
|
|
|
|
|
IN |
|
VCR |
|||
|
|
|
|
|
|
DVR |
|
|
|||
D/ |
OUT |
|
DVD |
DTV/CBL |
|
|
|
|
|
||
|
|
|
|
|
|
|
|||||
D-R (REC) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD |
DVD |
|
|
DVD |
|
|
|
|
|
|
4 |
5 |
|
6 |
|
|
IN1 |
|
|
3 |
|
|
COAXIAL |
|
|
|
|
|||
|
|
|
|
|
|
|
SPEAKERS |
||||
|
OPTICAL |
|
|
|
|
|
|
|
|
|
SU |
|
DIGITAL INPUT |
|
|
A |
|
CENTER |
|||||
|
FRONT |
B/ZONE B/ |
FRONT |
|
|
R |
|||||
|
|
|
NCE |
R |
|
L |
|
|
|
||
|
ZONE |
2/PRESE |
L |
|
|
|
|
|
|||
|
R EXTRA |
SP |
|
|
|
|
|
|
|||
Digital coaxial |
|
|
|
|
|
|
|
|
|
|
|
audio output |
|
|
|
|
|
|
|
|
DVD DIGITAL |
||
jack |
|
|
|
|
|
|
|
|
INPUT COAXIAL |
||
Digital coaxial audio |
|
|
|
jack |
|
||||||
cable |
|
|
|
|
|
|
|
|
|
|
2Connect the video cable to the composite video output jack of your DVD player and DVD VIDEO jack of this unit.
DVD player |
AV receiver |
|
|
|
|||
|
|
|
|
|
VIDEO |
|
|
|
DOCK |
|
VIDEO |
|
|
|
|
|
|
S VIDEO |
IN |
DVR |
OUT |
|
|
|
|
|
|
||||
|
|
DVD |
DTV/CBL |
|
V |
||
|
|
COMPONENT |
|||||
|
|
|
DVD |
|
|||
|
|
|
|
Y |
PR |
|
|
|
|
|
PR |
A PB |
|
||
|
|
|
|
|
|
||
|
|
|
|
|
OUT |
|
|
Composite |
|
|
|
DVD VIDEO jack |
video output
jack
Video cable
4Connect the power plug of this unit and other components into the AC wall outlet.
y
This unit is equipped with AC OUTLET(S) for the power supply of the other components (except Korea model). See page 28 for details.
■For further connections
•Using the other kind of speaker combinations
P. 11
•Connecting a video monitor via various ways of the
connection |
P. 20 |
• Connecting a DVD player via various ways of the
connection |
P. 21 |
• Connecting a DVD recorder or a digital video |
|
recorder |
P. 22 |
• Connecting a set-top box |
P. 22 |
• Connecting a CD player, an MD recorder or a |
|
turntable |
P. 23 |
• Connecting an external amplifier |
P. 24 |
• Connecting a DVD player via analog multi-channel
|
audio connection |
P. 25 |
• |
Connecting a Yamaha iPod universal dock or |
|
|
Bluetooth adapter |
P. 25 |
• |
Using the REMOTE IN/OUT jacks |
P. 26 |
•Using the VIDEO AUX jacks on the front panel
P. 26
•Connecting a FM/AM antenna
P. 27
• |
Connecting the XM Mini-Tuner Dock |
P. 57 |
• |
Connecting the SiriusConnect tuner |
P. 62 |
English
7 En
Quick start guide
Check the type of the connected speakers.
If the speakers are 6 ohm speakers, set “SP IMP.” to “6Ω MIN” before using this unit (see page 28). 4 ohm speakers can be also used as the front speakers (see page 106).
1Turn on the video monitor and then set the input source selector of the video monitor to this unit.
2Press SSCENE1 button.
This unit is turned on. “DVD Viewing” appears in the front panel display, and this unit automatically optimize own status for the DVD playback.
y
The indicator on the selected SCENE button lights up while this unit is in the SCENE mode.
3Start playback of the desired DVD on your player.
4Rotate JVOLUME to adjust the volume.
Note
When you change the input source or sound field program, the SCENE mode is deactivated.
■ About SCENE function
Just by pressing one SCENE button, you can turn on this unit and recall your favorite input source and sound field program according to the SCENE template that has been assigned to the SCENE button. The SCENE templates are built combinations of input sources and sound field programs.
y
If you connect a Yamaha product that has capability of the SCENE control signals, this unit can automatically activate the component and start playback. Refer to the instruction manual of the DVD player for further information.
■ The default assigned SCENE templates
Default |
The name of the SCENE template |
SCENE |
and its description |
button |
|
|
|
SCENE |
DVD Viewing |
1 |
– input source: DVD |
|
– sound field program: Straight |
|
For when you want to listen to a music disc from |
|
the connected DVD player as the background |
|
music for this room. |
|
|
SCENE |
Disc Listening |
2 |
– input source: DVD |
|
– sound field program: 7ch Stereo |
|
For when you want to listen to a music disc from |
|
the connected DVD player as the background |
|
music for this room. |
|
|
SCENE |
TV Viewing *1 |
3 |
– input source: DTV/CBL |
|
|
|
– sound field program: Straight |
|
For when you want to watch a TV program. |
|
|
SCENE |
Radio Listening *2, *3, *4 |
4 |
– input source: TUNER |
|
|
|
– sound field program: 7ch Enhancer |
|
For when you want to listen to a music program |
|
from the FM radio station. |
|
|
Notes
*1 You must connect a cable TV or a satellite tuner to this unit in advance. See page 22 for details.
*2 You need to connect the supplied FM and AM antennas to this unit in advance. See page 27 for details.
*3 You must tune into the desired radio station in advance. See pages 53 to 56 for tuning information.
*4 To achieve the best possible reception, orient the connected AM loop antenna, or adjust the position of the end of the indoor FM antenna.
y
You can change the assigned SCENE template for the SCENE buttons. See page 37 for details.
8 En
■ After using this unit...
Press KMAIN ZONE ON/OFF to set this unit to the standby mode.
This unit is set to the standby mode and consumes a small amount of power in order to receive infrared signals from the remote control. To turn on this unit from the standby mode, press the desired SSCENE buttons
(or 6SCENE) or KMAIN ZONE ON/OFF
(or HPOWER). See page 29 for details.
Quick start guide |
|
||
|
|
|
|
What do you want to do with this |
|
|
|
unit? |
|
|
|
|
|
|
INTRODUCTION |
|
|
|
|
■ Customizing the SCENE templates |
|
||
|
|
||
• Using various SCENE templates |
P. 37 |
|
|
• Creating your original SCENE templates |
|
|
|
|
P. 40 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
■ Using various input sources |
|
|
|
• Basic controls of this unit |
P. 42 |
|
|
• Enjoying FM/AM radio programs |
P. 53 |
|
|
• Enjoying XM Satellite Radio programs |
P. 57 |
|
|
• Enjoying SIRIUS Satellite Radio programs |
|
|
|
|
P. 62 |
|
|
• Using your iPod with this unit |
P. 68 |
|
|
• Using the Bluetooth components |
P. 70 |
|
|
|
|
|
|
|
|
|
|
■ Using various sound features |
|
|
|
• Using various sound field programs |
P. 48 |
|
|
• Using the pure direct mode for high |
|
|
|
fidelity sound |
P. 52 |
|
|
• Customizing the sound field programs |
P. 72 |
|
|
|
|
|
|
|
|
|
|
■ Adjusting the parameters of this unit |
|
||
• Automatically optimizing the speaker parameters |
|
||
for your listening room (AUTO SETUP) |
P. 32 |
|
•Manually adjusting various parameters of this unit
P. 80
• |
Setting the remote control |
P. 100 |
• |
Adjusting the advanced parameters |
P. 106 |
■ |
Additional feature |
|
• |
Automatically turning off this unit |
P. 47 |
|
|
|
English
9 En
|
|
|
|
|
|
|
|
|
|
|
|
|
Connections |
|
|
|
|
|
|
|
|
|
|
|
||||||
Rear panel |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
1 |
|
|
|
|
|
2 |
|
|
|
|
|
|
3 |
|
4 |
|
5 |
|
|
6 |
|
|
|
7 |
|
|
|
|
||
|
|
|
|
|
|
AUDIO |
|
|
|
|
|
MULTI CH INPUT |
|
|
PRE OUT |
CENTER |
|
DOCK |
VIDEO |
|
|
VIDEO |
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
FRONT (8CH) |
|
CENTER |
|
|
|
SINGLE |
|
|
|
|
|
|
|
|
|
||
|
|
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN |
MD/ |
OUT |
|
|
IN |
OUT |
IN |
OUT |
|
|
SUB |
|
|
|
|
1 |
2 |
S VIDEO |
|
IN |
OUT |
|
IN |
OUT |
MONITOR |
|
|
|
|
CD |
DVD |
DTV/CBL |
SB (8CH) |
SURROUND |
ZONE 2 |
FRONT |
SURROUND |
SUR. BACK |
DVD |
DTV/CBL |
|
||||||||||||||||
|
|
|
(PLAY) CD-R (REC) |
DVR |
|
|
VCR |
WOOFER |
SUBWOOFER |
|
DVR |
|
VCR |
|
OUT |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HDMI |
OUT |
|
|
|
|
|
|
|
|
|
COMPONENT VIDEO DTV/CBL |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PR |
A |
DVD |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PB |
Y |
PR |
B PB |
|
Y |
||
|
|
|
|
|
|
DVD |
DTV/CBL |
CD |
DVD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SIRIUS |
XM |
|
|
|
1 |
2 |
3 |
4 |
|
|
DVD |
|
DTV/CBL |
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
OPTICAL |
|
|
COAXIAL |
|
|
IN1 |
|
IN2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANTENNA |
|
|
|
DIGITAL INPUT |
|
|
|
SPEAKERS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C |
|
|
||||
|
|
|
|
FRONT B/ZONE B/ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MONITOR OUT |
|
DVR |
|
||||||||
|
|
|
|
|
|
|
FRONT A |
|
CENTER |
SURROUND |
SURROUND BACK/BI-AMP |
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
ZONE 2/PRESENCE |
|
|
|
|
|
|
|
|
AC OUTLETS |
|
|
|
|
|||||||||||
|
|
AM |
|
|
|
R EXTRA SP L |
|
R |
L |
|
|
R |
L |
|
R |
L |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SWITCHED |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
120V 80Hz |
|
|
|
|
|
|
GND |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100W MAX. TOTAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.8A MAX. TOTAL |
|
|
|
|
||
|
|
FM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
75Ω |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UNBAL. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
REMOTE |
TRIGGER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+12V |
|
|
|
|
|
|
|
|
|
|
|
|
SINGLE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN |
OUT |
15mA MAX. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
8 |
|
9 |
|
|
|
|
|
|
|
|
0 |
|
|
|
|
|
|
|
A |
|
B |
|
|
|
C |
|
|
|
|
|
|
|
9 TRIGGER OUT jack |
|
Name |
Page |
|
|
This is control expansion jack for custom installation. |
||
|
|
|
|
1 |
XM jack |
57 |
|
|
(U.S.A. and Canada models only) |
|
|
|
|
|
|
|
SIRIUS jack |
62 |
|
|
(U.S.A. and Canada models only) |
|
|
|
|
|
|
2 |
AUDIO jacks |
21 |
|
|
|
|
|
|
DIGITAL INPUT/OUTPUT jacks |
17-23 |
|
|
|
|
|
3 |
MULTI CH INPUT jacks |
25 |
|
|
|
|
|
4 |
ZONE2 OUT jacks |
103 |
|
|
|
|
|
5 |
PRE OUT jacks |
24 |
|
|
|
|
|
6 |
DOCK terminal |
25 |
|
|
|
|
|
7 |
Video component jacks |
17-22 |
|
|
(VIDEO and S VIDEO) |
|
|
|
|
|
|
|
COMPONENT VIDEO jacks |
17-22 |
|
|
|
|
|
8 |
ANTENNA terminals |
27 |
|
|
|
|
|
9 |
REMOTE IN/OUT jacks |
26 |
|
|
|
|
|
0 |
Speaker terminals |
11-16 |
|
|
|
|
|
A HDMI jacks |
18 |
|
|
|
|
|
|
B VOLTAGE SELECTOR |
4 |
|
|
|
(Asia and General models only) |
|
|
|
|
|
|
C AC OUTLET(S) |
28 |
|
|
|
|
|
|
10 En
Connections
The speaker layout below shows the speaker setting we recommend. You can use it to enjoy the CINEMA DSP and multi-channel audio sources.
■ 7.1-channel speaker layout
7.1-channel speaker layout is highly recommended for playback the sound of high definition audio formats (Dolby TrueHD, DTS-HD Master Audio, etc.) as well as the conventional audio sources with sound field programs. See page 14 for connection information.
y
We recommend that you also add the presence speakers for the effect sounds of the CINEMA DSP sound field program. See page 13 for details.
C
FL |
FR |
FR
|
SW |
|
FL |
SR |
30˚ |
|
C |
|
|
|
|
|
SL |
SL |
|
SR |
|
SW |
|
60˚ |
|
||
SBR |
SL |
SR |
|||
|
80˚ |
||||
|
|
|
|
||
|
SBL |
|
SBL |
SBR |
|
|
|
|
|
||
|
|
30 cm (12 in) or more |
Speaker indications
FL/FR: Front left/right
C: Center
SL/SR: Surround left/right
SBL/SBR: Surround back left/right
SW: Subwoofer
Front left and right speakers
The front speakers are used for the main source sound plus effect sounds. Place these speakers at an equal distance from the ideal listening position. The distance of each speaker from each side of the video monitor should be the same.
Center speaker
The center speaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not practical to use a center speaker, you can do without it. Best results, however, are obtained with the full system.
Surround left and right speakers
The surround speakers are used for effect and surround sounds.
Surround back left and right speakers
The surround back speakers supplement the surround speakers and provide more realistic front-to-back transitions.
Subwoofer(s)
The use of a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels, but also for reproducing the high fidelity sound of the LFE (low-frequency effect) channel included in Dolby Digital and DTS sources. You can connect one or two subwoofer(s) to this unit. When you use two subwoofers, you can enjoy deeper bass sound. The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce wall reflections.
y
When you use two subwoofers, select the same type of the subwoofer as another and set these subwoofers as same sound characteristics. Place each subwoofer at the same distance from the listening position. The signal output at the SUBWOOFER PRE OUT 2 is the same as the one output at the SUBWOOFER PRE OUT 1 jack.
11 En
PREPARATION
English
Connections
■ 6.1-channel speaker layout
See page 14 for connection information.
y
We recommend that you also add the presence speakers for the effect sounds of the CINEMA DSP sound field program. See page 13 for details.
■ 5.1-channel speaker layout
See page 14 for connection information.
y
We recommend that you also add the presence speakers for the effect sounds of the CINEMA DSP sound field program. See page 13 for details.
FR |
FR |
FL
C
SL
SW
C
FL |
FR |
30˚
SL |
|
SR |
SL |
|
60˚ |
80˚ |
SR |
|
|
|
SB |
SW
SR
SB
Speaker indications
FL/FR: Front left/right C: Center
SL/SR: Surround left/right SB: Surround back
SW: Subwoofer
SW FL
C
SR
SW
SL
C |
Speaker indications |
FL |
FR |
FL/FR: Front left/right C: Center
30˚ SL/SR: Surround left/right SW: Subwoofer
SL |
|
SR |
SL |
|
60˚ |
80˚ |
SR |
Front left and right speakers Center speaker
Surround left and right speakers Subwoofer(s)
The functions and settings of each speaker are the same as those for the 7.1-channel speaker layout (see page 11).
Surround back speaker
Connect a single surround speakers to the SURROUND BACK SINGLE speaker terminal and place the single surround back speaker behind the listening position. The surround back left and right channel signals are mixed down and output at the single surround back speaker when you set “SUR.B L/R SP” to “SMLx1” or “LRGx1” (see page 86).
Front left and right speakers Center speaker Subwoofer(s)
The functions and settings of each speaker are the same as those for the 7.1-channel speaker layout (see page 11).
Surround left and right speakers
Connect the surround speakers to the SURROUND speaker terminals even if you place the surround speakers behind the listening position. For the smooth and unbroken sound field behind the listening position, place the surround left and right speakers farther back compared with the placement in the 7.1-channel speaker layout. The surround back channel signals are directed to the surround left and right speakers when “SUR.B L/R SP” is set to “NONE” (see page 86).
For other speaker combinations
You can enjoy multi-channel sources with sound field programs by using a speaker combination other than the 7.1/ 6.1/5.1-channel speaker combinations.
Use the automatic setup feature (see page 32) or set the “SPEAKER SET” parameters in “MANUAL SETUP” (see page 85) to output the surround sounds at the connected speakers.
12 En
Connections
■ Using presence speakers
The presence speakers supplement the sound from the front and surround back speakers with extra ambient effects produced by the sound field programs (see page 48). You can adjust the vertical position of dialogues with using the presence speakers (see page 73).
To use the presence speakers, connect the speakers to the EXTRA SP terminal (see page 14) and set “EXTRA SP ASSIGN” to “PRESENCE” (see pages 33 and 85).
0.5 to 1 m (1 to 3 ft) |
0.5 to 1 m (1 to 3 ft) |
Speaker indications
PL |
PR |
1.8 m |
FL |
FR |
1.8 m |
(6 ft) or |
(6 ft) or |
||
higher |
|
|
higher |
|
|
C |
|
FL: Front left FR: Front right
C: Center
PL: Front presence left PR: Front presence right
PREPARATION
English
13 En
Connections
Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, this unit cannot reproduce the input sources accurately.
Caution
•Before connecting the speakers, make sure that the AC power plug is disconnected from the AC wall outlet.
•Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This could damage this unit and/or the speakers. If the speaker wires are short-circuited, “CHECK SP WIRES” appears in the front panel display when you turn on this unit.
•Use the magnetically shielded speakers. If this type of speaker still creates interference with the monitor, place the speakers away from the monitor.
•If you are to use 6 ohm speakers, be sure to set “SP IMP.” to “6Ω MIN” before using this unit (see page 28). 4 ohm speakers can be also used as the front speakers. For details about the speaker impedance setting, see page 106.
Note
A speaker cord is actually a pair of insulated cables running side by side. Cables are colored or shaped differently, perhaps with a stripe, groove or ridge. Connect the striped (grooved, etc.) cable to the “+” (red) terminals of this unit and your speaker. Connect the plain cable to the “–” (black) terminals.
■ For the 7.1-channel speaker setting
EXTRA SP terminals
Connect the alternative front speaker system (FRONT B), front speaker systems in another room (ZONE B), presence speakers, or Zone 2 speakers. To select the function of the speakers connected to the EXTRA SP terminals, set the “EXTRA SP ASSIGN” parameter in “SOUND MENU” (see page 85).
y
You can also select the function of the speakers connected to the EXTRA SP terminals in “AUTO SETUP” (see page 33).
Subwoofers
(optional)
|
|
AUDIO |
|
|
|
|
MULTI CH INPUT |
|
PRE OUT |
CENTER |
|
DOCK |
VIDEO |
|
|
VIDEO |
|
|
|
|
||
|
|
|
|
|
|
|
|
FRONT (8CH) |
CENTER |
|
SINGLE |
|
|
|
|
|
|
|
|
|
||
|
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN MD/ OUT |
|
|
IN |
OUT |
IN |
OUT |
SUB |
|
|
1 |
2 |
|
S VIDEO |
|
IN |
OUT |
|
IN |
OUT |
MONITOR |
|
CD |
DVD |
DTV/CBL |
|
FRONT SURROUND SUR. BACK |
|
DVD DTV/CBL |
|
||||||||||||||
|
(PLAY) CD-R (REC) |
DVR |
|
VCR |
SB (8CH) |
SURROUND WOOFER ZONE 2 |
SUBWOOFER |
|
|
DVR |
|
VCR |
OUT |
|||||||||
|
|
|
|
|
|
|
|
|
HDMI |
OUT |
|
|
|
|
|
|
|
COMPONENT VIDEO |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PR |
A |
DVD |
DTV/CBL |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PB |
Y |
PR |
B |
PB |
Y |
||
|
|
DVD |
DTV/CBL |
CD |
DVD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SIRIUS |
XM |
1 |
2 |
3 |
4 |
|
|
DVD |
DTV/CBL |
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
OPTICAL |
|
|
COAXIAL |
|
|
IN1 |
IN2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
ANTENNA |
DIGITAL INPUT |
|
|
SPEAKERS |
|
|
|
|
C |
|
|
FRONT B/ZONE B/ |
|
|
|
|
|
MONITOR OUT |
DVR |
||||
|
|
|
FRONT A |
CENTER |
SURROUND |
SURROUND BACK/BI-AMP |
|||||
|
|
ZONE 2/PRESENCE |
|
AC OUTLETS |
|
|
|||||
|
AM |
R EXTRA SP L |
R |
L |
R |
L |
R |
L |
|
|
|
|
|
|
|
|
|
|
|
SWITCHED |
|
|
|
|
|
|
|
|
|
|
|
|
120V 80Hz |
|
|
|
GND |
|
|
|
|
|
|
|
100W MAX. TOTAL |
|
|
|
|
|
|
|
|
|
|
0.8A MAX. TOTAL |
|
|
|
|
FM |
|
|
|
|
|
|
|
|
|
|
|
75Ω |
|
|
|
|
|
|
|
|
|
|
|
UNBAL. |
|
|
|
|
|
|
|
|
|
|
REMOTE |
TRIGGER |
|
|
|
|
|
|
|
|
|
|
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
+12V |
|
|
|
|
|
SINGLE |
|
|
|
IN |
OUT |
15mA MAX. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Center speaker |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
Right |
Left |
|
|
|
|
|
|
|
|
Right |
Left |
|
|
Right |
Left |
|
|
|||||||||||||||
|
|
Front speakers |
|
|
|
|
|
|
Surround speakers |
Surround back speakers |
|||||||||||||||||||||||
|
|
(FRONT A) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14 En
Connections
■ For the 6.1-channel speaker setting
Center speaker
EXTRA SP terminals
(see page 14)
(optional)
AUDIO |
|
|
|
|
|
MULTI CH INPUT |
|
PRE OUT |
CENTER |
|
DOCK |
|
|
|
|
|
|
|
FRONT (8CH) |
CENTER |
|
SINGLE |
|
|
|
IN MD/ OUT |
DVD DTV/CBL |
IN |
OUT |
IN |
OUT |
SB (8CH) SURROUND |
SUB |
|
FRONT SURROUND SUR. BACK |
1 |
2 |
|
(PLAY) CD-R (REC) |
DVR |
|
|
VCR |
WOOFER ZONE 2 |
SUBWOOFER |
Subwoofers |
|||||
|
|
|
|
|
|
|
HDMI |
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
DVD |
DTV/CBL |
CD |
DVD |
|
|
|
|
1 |
2 |
3 |
4 |
DVD |
DTV/CBL |
|
OUT |
OPTICAL |
DIGITAL INPUT |
COAXIAL |
|
IN1 |
IN2 |
|
|
|
|
|
SPEAKERS |
|
|
|
|
FRONT B/ZONE B/ |
|
|
|
|
|
||
|
FRONT A |
CENTER |
SURROUND |
SURROUND BACK/BI-AMP |
|||
ZONE 2/PRESENCE |
|
||||||
R EXTRA SP L |
R |
L |
R |
L |
R |
L |
|
TRIGGER |
|
|
|
|
|
|
|
OUT |
|
|
|
|
|
|
|
2V |
|
|
|
|
|
|
SINGLE |
mA MAX. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PREPARATION
|
|
|
|
|
|
|
|
|
|
|
|
|
Right |
|
Left |
Right |
|
Left |
Left (SINGLE) |
||||||
|
Front speakers |
Surround speakers |
Surround back speaker |
|||||||||
|
(FRONT A) |
|
|
|
|
|
|
|
|
■ For the 5.1-channel speaker setting
Center speaker
EXTRA SP terminals |
|
|
|
|
|
|
|
|
|
(see page 14) |
|
|
|
|
|
|
|
|
(optional) |
|
|
|
|
|
|
|
|
|
|
AUDIO |
|
|
MULTI CH INPUT |
|
PRE OUT |
CENTER |
|
DOCK |
|
|
|
|
FRONT (8CH) |
CENTER |
|
SINGLE |
|
|
|
IN MD/ OUT |
IN OUT |
IN |
OUT |
SUB |
|
FRONT SURROUND SUR. BACK |
1 |
2 |
Subwoofers |
(PLAY) CD-R (REC) DVD DTV/CBL |
DVR |
VCR |
SB (8CH) |
SURROUND WOOFER ZONE 2 |
SUBWOOFER |
||||
|
|
|
|
HDMI |
OUT |
|
|
|
DVD |
DTV/CBL |
CD |
DVD |
|
|
|
|
1 |
2 |
3 |
4 |
DVD |
DTV/CBL |
|
OUT |
OPTICAL |
DIGITAL INPUT |
COAXIAL |
|
IN1 |
IN2 |
|
|
|
|
|
SPEAKERS |
|
|
|
|
FRONT B/ZONE B/ |
|
|
|
|
|
||
|
FRONT A |
CENTER |
SURROUND |
SURROUND BACK/BI-AMP |
|||
ZONE 2/PRESENCE |
|
||||||
R EXTRA SP L |
R |
L |
R |
L |
R |
L |
|
TRIGGER |
|
|
|
|
|
|
|
OUT |
|
|
|
|
|
|
|
2V |
|
|
|
|
|
|
SINGLE |
mA MAX. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Right |
|
Left |
Right |
|
Left |
||||
|
Front speakers |
Surround speakers |
|||||||
|
(FRONT A) |
|
|
|
|
|
English
15 En
Connections
■ Connecting the speaker cable
1Remove approximately 10 mm (0.4 in) of insulation from the end of each speaker cable and then twist the exposed wires of the cable together to prevent short circuits.
10 mm (0.4 in)
■Connecting the banana plug
(except Europe, Russia, Asia and Korea models)
Tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.
2 Loosen the knob.
Red: positive (+)
Black: negative (–)
3Insert one bare wire into the hole on the side of each terminal.
4 Tighten the knob to secure the wire.
Red: positive (+)
Black: negative (–)
■ Using bi-amplification connections
Caution
Remove the shorting bars or bridges of your speakers to separate the LPF (low pass filter) and HPF (high pass filter) crossovers.
This unit allows you to make bi-amplification connections to one speaker system. Check if your speakers support biamplification.
To make the bi-amplification connections, use the FRONT and SURROUND BACK/BI-AMP terminals as shown below. To activate the bi-amplification connections, set “BI-AMP” to “ON” in “ADVANCED SETUP” (see page 109).
Front speakers
Right |
Left |
|
FRONT A |
SURROUND BACK/ |
|
|
|
|
BI-AMP |
R |
L |
R |
SINGLE L |
This unit
Note
When you make the conventional connection, make sure that the shorting bars are put into the terminals appropriately. Refer to the instruction manuals of the speakers for details.
16 En
Connections
Connect one of the type of the audio jack(s) and/or video jack(s) that your input components are equipped with.
Audio jacks and cable plugs
AUDIO |
DIGITAL |
DIGITAL |
|
L |
R |
COAXIAL |
OPTICAL |
(White) |
(Red) |
(Orange) |
|
L |
R |
C |
O |
|
|||
Left and right |
Coaxial |
Optical |
|
analog audio |
digital audio |
digital |
|
cable plugs |
cable plug |
audio cable |
|
|
|
|
plug |
Video jacks and cable plugs
|
|
COMPONENT VIDEO |
||
VIDEO |
S VIDEO |
PR |
PB |
Y |
(Yellow) |
|
(Red) |
(Blue) |
(Green) |
V |
S |
PR |
PB |
Y |
|
||||
Composite |
S-video |
|
Component |
|
video cable |
cable plug |
|
video cable |
|
plug |
|
|
plugs |
|
PREPARATION
■ Audio jacks
This unit has three types of audio jacks. Connection depends on the availability of audio jacks on your other components.
AUDIO jacks
For conventional analog audio signals transmitted via left and right analog audio cables. Connect red plugs to the right jacks and white plugs to the left jacks.
DIGITAL COAXIAL jacks
For digital audio signals transmitted via coaxial digital audio cables.
DIGITAL OPTICAL jacks
For digital audio signals transmitted via optical digital audio cables.
Note
You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. When you connect components to both the COAXIAL and OPTICAL jacks, priority is given to the signals input at the COAXIAL jack. Optical input jacks are compatible with digital signals with up to 96 kHz of sampling frequency.
■ Video jacks
This unit has three types of video jacks. Connection depends on the availability of input jacks on your video monitor.
VIDEO jacks
For conventional composite video signals transmitted via composite video cables.
S VIDEO jacks
For S-video signals, separated into the luminance (Y) and chrominance (C) video signals transmitted on separate wires of S-video cables.
COMPONENT VIDEO jacks
For component video signals, separated into the luminance (Y) and chrominance (PB, PR) video signals transmitted on separate wires of component video cables.
y
This unit is equipped with the video conversion function. See pages 19 and 97 for details.
English
17 En
Connections
■ HDMI signal compatibility
Audio signals
Audio signal |
Audio signal |
Compatible |
types |
formats |
media |
|
|
|
2ch Linear |
2ch, 32-192 kHz, |
CD, DVD-Video, |
PCM |
16/20/24 bit |
DVD-Audio, etc. |
|
|
|
Multi-ch |
8ch, 32-192 kHz, |
DVD-Audio, Blu- |
Linear PCM |
16/20/24 bit |
ray Disc, HD DVD, |
|
|
etc. |
|
|
|
DSD |
2/5.1ch, |
SA-CD, etc. |
|
2.8224 MHz, 1 bit |
|
|
|
|
Bitstream |
Dolby Digital, |
DVD-Video, etc. |
|
DTS |
|
|
|
|
Bitstream (High |
Dolby TrueHD, |
Blu-ray Disc, |
definition audio) |
Dolby Digital Plus, |
HD DVD, etc. |
|
DTS-HD Master |
|
|
Audio, DTS-HD High |
|
|
Resolution Audio, |
|
|
DTS Express |
|
|
|
|
y
•If the input source component can decode the bitstream audio signals of audio commentaries, you can play back the audio sources with the audio commentaries mixed down by using the following connections:
–multi-channel analog audio input (see page 25)
–DIGITAL INPUT OPTICAL (or COAXIAL)
•Refer to the supplied instruction manuals of the input source component, and set the component appropriately.
Video signals
This unit is compatible with the video signals of the following resolutions:
Video signal format
–480i/60 Hz
–576i/50 Hz
–480p/60 Hz
–576p/50 Hz
–720p/60 Hz, 50 Hz
–1080i/60 Hz, 50 Hz
–1080p/60 Hz, 50 Hz, 24 Hz
Default input assignment of HDMI input jacks
HDMI input jack |
Assigned input source |
IN1 |
DVD |
|
|
IN2 |
DTV/CBL |
|
|
■ HDMI jack and cable plug
HDMI
HDMI cable plug
Notes
•When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output depending on the type of the DVD player.
•This unit is not compatible with HDCP-incompatible HDMI or DVI components.
•To decode audio bitstream signals on this unit, set the input source component appropriately so that the component outputs the bitstream audio signals directly (does not decode the bitstream signals on the component). Refer to the supplied instruction manuals for details.
•This unit is not compatible with the audio commentary features (for example, the special audio contents downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not play back the audio commentaries of the Blu-ray Disc or HD DVD contents.
y
•We recommend that you use an HDMI cable shorter than 5 meters (16 feet) with the HDMI logo printed on it.
•Use a conversion cable (HDMI jack ↔DVI-D jack) to connect this unit to other DVI components.
Notes
•Do not disconnect or connect the cable or turn off the power of the HDMI components connected to the HDMI OUT jack of this unit while data is being transferred. Doing so may disrupt playback or cause noise.
•If you turn off the power of the video monitor connected to the HDMI OUT jack via a DVI connection, this unit may fail to establish the connection to the component.
•The analog video signals input at the composite video, S-video and component video jacks can be digitally up-converted to be output at the HDMI OUT jack. Set “VIDEO CONV.” to “ON” in “MANUAL SETUP” (see page 97) to activate this feature.
18 En
■ Audio signal flow
Input |
Output |
HDMI
AUDIO
Digital output
Analog output
Connections
■ Video signal flow
Input |
Output |
HDMI
COMPONENT
VIDEO
S VIDEO
VIDEO
Through
Video conversion ON (see page 97)
Notes
•2-channel as well as multi-channel PCM, Dolby Digital and DTS signals input at one of the HDMI IN jacks can be output at the HDMI OUT jack only when “S.AUDIO” is set to “OTHER” (see page 98).
•Audio signals input at the HDMI IN jacks are not output at the AUDIO output and DIGITAL OUTPUT jacks.
Notes
•When the video signals are input at the HDMI, COMPONENT VIDEO, S VIDEO, and VIDEO jacks, the priority order of the input signals is as follows:
1.HDMI
2.COMPONENT VIDEO
3.S VIDEO
4.VIDEO
•Digital video signals input at one of the HDMI IN jacks cannot be output from analog video output jacks.
•The analog component video signals with
480i (NTSC)/576i (PAL) of resolution are converted to the S-video or composite video signals and output at the S VIDEO MONITOR OUT and VIDEO MONITOR OUT jacks.
•The analog component video signals with 1080p of resolution are only output at the COMPONENT VIDEO MONITOR OUT jacks.
PREPARATION
English
19 En
Connections
Connect your TV (or projector) to the HDMI OUT jack, the COMPONENT VIDEO MONITOR OUT jacks, the S VIDEO MONITOR OUT jack or the VIDEO MONITOR OUT jack of this unit.
Make sure that this unit and other components are unplugged from the AC wall outlets.
y
•You can choose to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack of this unit. Use the “S.AUDIO” parameter in “OPTION MENU” to select the component to play back HDMI audio signals (see page 98).
•When you use the internal tuner of the TV as the input source, connect the digital or analog audio output jacks of the TV and digital or analog audio input jacks of this unit. Refer to “Connecting a set-top box” on page 22 for connecting information.
Notes
•If a video monitor is connected to this unit via a DVI connection, you may not take full advantage of the HDMI features.
•Some video monitors connected to this unit via a DVI connection fail to recognize the HDMI audio/video signals being input if they are in the standby mode. In this case, the HDMI indicator flashes irregularly.
•If the connected video monitor is compatible with the automatic audio and video synchronization feature (automatic lip sync feature), this unit adjusts the audio and video timing automatically (see page 92). Connect the video monitor to the HDMI OUT jack of this unit to use the feature.
|
AUDIO |
|
|
|
|
|
MULTI CH INPUT |
|
|
PRE OUT |
CENTER |
|
DOCK |
VIDEO |
|
|
VIDEO |
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
FRONT (8CH) |
|
CENTER |
|
|
|
SINGLE |
|
|
|
|
|
|
|
|
|
|
||
MD/ |
OUT |
|
|
IN |
OUT |
IN |
OUT |
|
|
SUB |
|
|
|
|
1 |
2 |
S VIDEO |
|
IN |
OUT |
|
IN |
|
OUT |
MONITOR |
|
DVD |
DTV/CBL |
SB (8CH) |
SURROUND |
ZONE 2 |
FRONT |
SURROUND |
SUR. BACK |
DVD |
DTV/CBL |
|
|
|||||||||||||||
D-R (REC) |
DVR |
|
|
VCR |
WOOFER |
SUBWOOFER |
|
DVR |
|
VCR |
|
OUT |
||||||||||||||
|
|
|
|
|
|
|
|
|
|
HDMI |
OUT |
|
|
|
|
|
|
|
|
|
COMPONENT VIDEO |
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PR |
A |
DVD |
DTV/CBL |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PB |
Y |
PR |
B |
PB |
|
Y |
||
|
DVD |
DTV/CBL |
CD |
DVD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
2 |
3 |
4 |
|
|
DVD |
|
DTV/CBL |
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OPTICAL |
|
|
COAXIAL |
|
|
IN1 |
|
IN2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIGITAL INPUT |
|
|
|
SPEAKERS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C |
|
|
|
|||
|
FRONT B/ZONE B/ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MONITOR OUT |
|
|
DVR |
|
||||||
|
|
FRONT A |
|
CENTER |
SURROUND |
SURROUND BACK/BI-AMP |
|
|
|
|
|
|
|
|
|
|||||||||||
|
ZONE 2/PRESENCE |
|
|
|
|
|
|
|
|
AC OUTLETS |
|
|
|
|
|
|||||||||||
|
R EXTRA SP L |
|
R |
L |
|
|
R |
L |
|
R |
L |
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SWITCHED |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
120V 80Hz |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100W MAX. TOTAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.8A MAX. TOTAL |
|
|
|
|
|
O
Optical out
HDMI in |
Y |
PB |
PR |
S V |
Component video in
S-video in
Video in
TV (or projector)
indicates recommended connections
indicates alternative connections
(One for the video connection, and one for the audio connection)
20 En
Make sure that this unit and other components are unplugged from the AC wall outlets.
Notes
•When “VIDEO CONV.” is set to “OFF” (see page 97), be sure to make the same type of video connections as those made for your TV (see page 20). For example, if you connected your TV to the VIDEO MONITOR OUT jack of this unit, connect your other components to the VIDEO jacks.
Connections
•When “VIDEO CONV.” is set to “ON” (see page 97), the converted video signals are output only at the MONITOR OUT jacks. To record a source, make the same type of video connections between each component.
•To make a digital connection to a component other than the default component assigned to each DIGITAL INPUT or DIGITAL OUTPUT jack, select the corresponding setting for “OPTICAL OUT”, “OPTICAL IN”, or “COAXIAL IN” in “I/O ASSIGNMENT” (see page 93).
•If you connect your DVD player to both the DIGITAL INPUT (OPTICAL) and the DIGITAL INPUT (COAXIAL) jacks, priority is given to the signals input at the DIGITAL INPUT (COAXIAL) jack.
■ Connecting a DVD player |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
Optical out |
|
DVD player |
S-video out |
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
Coaxial out |
|
|
|
|
|
Video out |
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Component video out |
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
Audio out |
|
|
|
HDMI out |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
O |
|
|
C |
|
L |
|
R |
|
|
|
|
|
|
|
|
|
PR |
PB |
Y |
|
V |
S |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
AUDIO |
|
|
|
|
|
|
MULTI CH INPUT |
|
PRE OUT |
CENTER |
DOCK |
|
VIDEO |
|
VIDEO |
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FRONT (8CH) |
|
CENTER |
|
|
SINGLE |
|
|
|
|
|
|
|
|
|
||
|
|
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN |
MD/ |
OUT |
|
|
|
IN |
OUT |
IN |
OUT |
|
|
SUB |
|
|
|
1 |
2 |
S VIDEO |
IN |
OUT |
|
IN |
|
OUT |
MONITOR |
|
|
|
|
CD |
DVD |
DTV/CBL |
SB (8CH) |
SURROUND |
ZONE 2 |
FRONT SURROUND |
SUR. BACK |
DVD |
|
|
|
||||||||||||||||
|
|
|
(PLAY) CD-R (REC) |
DVR |
|
|
VCR |
WOOFER |
SUBWOOFER |
DTV/CBL |
DVR |
|
VCR |
|
OUT |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HDMI |
OUT |
|
|
|
|
|
|
|
COMPONENT VIDEO |
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PR |
DVD |
DTV/CBL |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A PB |
Y |
PR |
B |
PB |
|
Y |
|
|
|
|
|
|
|
DVD |
DTV/CBL |
CD |
DVD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SIRIUS |
XM |
|
|
|
1 |
2 |
|
3 |
4 |
|
|
DVD |
|
DTV/CBL |
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OPTICAL |
|
|
COAXIAL |
|
|
IN1 |
|
IN2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
ANTENNA |
|
|
|
DIGITAL INPUT |
|
|
|
|
SPEAKERS |
|
|
|
|
|
|
|
|
|
|
|
|
C |
|
|
|
||||
|
|
|
|
FRONT B/ZONE B/ |
|
|
|
|
|
|
|
|
|
|
|
|
|
MONITOR OUT |
|
|
DVR |
|
||||||||
|
|
|
|
|
|
|
FRONT A |
|
CENTER |
SURROUND |
SURROUND BACK/BI-AMP |
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
ZONE 2/PRESENCE |
|
|
|
|
|
|
|
AC OUTLETS |
|
|
|
|
|
|||||||||||
|
|
AM |
|
|
|
R EXTRA SP |
L |
R |
|
L |
|
|
R |
L |
|
R |
L |
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SWITCHED |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
120V 80Hz |
|
|
|
|
|
|
|
GND |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100W MAX. TOTAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.8A MAX. TOTAL |
|
|
|
|
|
||
|
|
FM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
75Ω |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UNBAL. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
REMOTE |
TRIGGER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+12V |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN |
OUT |
15mA MAX. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PREPARATION
indicates recommended connections
indicates alternative connections
(One for the video connection, and one for the audio connection)
English
21 En
Connections
■ Connecting a DVD recorder, PVR or VCR
R L R L
VCR |
S-video out |
Audio out
S-video in
Audio in |
Video in |
|
|
|
Video out |
V |
V |
S |
S |
|
|
|
AUDIO |
|
|
|
|
|
MULTI CH INPUT |
|
|
PRE OUT |
CENTER |
|
||||
|
|
|
|
|
|
|
|
|
|
FRONT (8CH) |
|
CENTER |
|
|
|
SINGLE |
|
|
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD |
IN |
MD/ |
OUT |
DVD |
DTV/CBL |
IN |
OUT |
IN |
OUT |
SB (8CH) |
SURROUND |
SUB |
ZONE 2 |
FRONT |
SURROUND |
SUR. BACK |
1 |
2 |
(PLAY) CD-R (REC) |
DVR |
|
|
VCR |
WOOFER |
SUBWOOFER |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
HDMI |
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DVD |
DTV/CBL |
CD |
DVD |
|
|
|
|
|
|
|
|
|
|
|
|
XM |
|
|
1 |
2 |
3 |
4 |
|
|
DVD |
|
DTV/CBL |
|
|
OUT |
|
|
|
|
|
|
|
OPTICAL |
|
|
COAXIAL |
|
|
IN1 |
|
IN2 |
|
|
|
|
|
|
|
ANTENNA |
|
|
DIGITAL INPUT |
|
|
|
SPEAKERS |
|
|
|
|
|
|
|
|
|||
|
|
FRONT B/ZONE B/ |
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
FRONT A |
|
CENTER |
SURROUND |
SURROUND BACK/BI-AMP |
|
|
|
|
||||||
|
|
|
ZONE 2/PRESENCE |
|
|
|
|
|
DOCK |
VIDEO |
|
|
VIDEO |
|
|
|
|
|
|
|
|
|
|
|
|
|
S VIDEO |
|
IN |
OUT |
|
IN |
OUT |
MONITOR |
|
DVD |
DTV/CBL |
|
||||||
|
DVR |
|
VCR |
OUT |
||||
|
PR |
A |
DVD |
COMPONENT VIDEO |
DTV/CBL |
|
||
|
PB |
Y |
PR |
B |
PB |
Y |
MONITOR OUT |
C DVR |
AC OUTLETS
L R L R
Video |
V |
S |
video-S |
|
|
||
|
|
|
|
out |
|
|
out |
Audio in
Audio out
DVD recorder or PVR
S |
V |
|
S-video in
Video in
Component video out
Y PB PR
■ Connecting a set-top box
|
Satellite receiver, cable |
|
|
TV receiver or HDTV |
|
Optical out |
decoder |
S-video out |
|
||
|
|
|
|
|
Video out |
Audio out |
|
Component video out |
R L
O
out HDMI
Y |
PB PR |
V |
S |
|
|
|
|
|
|
|
AUDIO |
|
|
|
|
MULTI CH INPUT |
|
|
PRE OUT |
CENTER |
|
DOCK |
VIDEO |
|
|
VIDEO |
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
FRONT (8CH) |
|
CENTER |
|
|
|
SINGLE |
|
|
|
|
|
|
|
|
|
||
|
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN |
MD/ |
OUT |
|
|
IN |
OUT |
IN |
OUT |
|
SUB |
|
|
|
|
1 |
2 |
S VIDEO |
|
IN |
OUT |
|
IN |
OUT |
MONITOR |
|
|
CD |
DVD |
DTV/CBL |
SURROUND |
ZONE 2 |
FRONT |
SURROUND |
SUR. BACK |
DVD |
DTV/CBL |
|
||||||||||||||||
|
(PLAY) CD-R (REC) |
DVR |
|
VCR |
SB (8CH) |
WOOFER |
SUBWOOFER |
|
DVR |
|
VCR |
OUT |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
HDMI |
OUT |
|
|
|
|
|
|
|
|
|
COMPONENT VIDEO |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PR |
A |
DVD |
DTV/CBL |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PB |
Y |
PR |
B |
PB |
Y |
||
|
|
|
|
DVD |
DTV/CBL |
CD |
DVD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SIRIUS |
XM |
|
|
1 |
2 |
3 |
4 |
|
|
DVD |
DTV/CBL |
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OPTICAL |
|
|
COAXIAL |
|
|
IN1 |
IN2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANTENNA |
|
|
DIGITAL INPUT |
|
|
SPEAKERS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C |
|
|
|||
|
|
|
FRONT B/ZONE B/ |
|
|
|
|
|
|
|
|
|
|
|
|
|
MONITOR OUT |
|
DVR |
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
indicates recommended connections
indicates alternative connections
(One for the video connection, and one for the audio connection)
22 En
Connections
■ Connecting audio components
Notes
•To make a digital connection to a component other than the default component assigned to each the DIGITAL INPUT jack, select the corresponding setting for “OPTICAL IN”, or “COAXIAL IN” in “I/O ASSIGNMENT” (see page 93).
•When you connect both the DIGITAL INPUT (OPTICAL) jack and the DIGITAL INPUT (COAXIAL) jack to an audio component, the priority is given to the DIGITAL INPUT (COAXIAL) jack.
CD recorder, MD recorder or tape deck
Audio out |
Audio in |
L R |
L R |
|
|
|
|
AUDIO |
|
|
|
|
|
MULTI CH INPUT |
|
|
PRE OU |
||||
|
|
|
|
|
|
|
|
|
|
|
FRONT (8CH) |
|
CENTER |
|
|
|
|
|
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD |
IN |
MD/ |
OUT |
DVD |
DTV/CBL |
IN |
OUT |
IN |
OUT |
SB (8CH) |
SURROUND |
SUB |
ZONE 2 |
FRONT |
SURROUND |
S |
|
(PLAY) CD-R (REC) |
DVR |
|
|
VCR |
WOOFER |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
HDMI |
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DVD |
DTV/CBL |
CD |
DVD |
|
|
|
|
|
|
|
|
|
|
SIRIUS |
XM |
|
|
1 |
2 |
3 |
4 |
|
|
DVD |
|
DTV/CBL |
|
|
OUT |
|
|
|
|
|
|
OPTICAL |
|
|
COAXIAL |
|
|
IN1 |
|
IN2 |
|
|
|
|
|
|
ANTENNA |
|
|
DIGITAL INPUT |
|
|
|
SPEAKERS |
|
|
|
|
|
|
|||
|
|
|
FRONT B/ZONE B/ |
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
FRONT A |
|
CENTER |
SURROUND |
SURROUND BACK/BI-AMP |
|
|
||||||
|
|
|
|
ZONE 2/PRESENCE |
|
|
|
||||||||||
|
AM |
|
|
R EXTRA SP L |
|
R |
L |
|
|
R |
L |
|
R |
L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GND |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FM 75Ω
UNBAL.
REMOTE TRIGGER
OUT
|
+12V |
IN |
OUT 15mA MAX. |
PREPARATION
L R |
C Coaxial |
|
out |
Audio
out
CD player
indicates recommended connections
indicates alternative connections (One for the audio connection)
English
23 En
Connections
■ Connecting an external amplifier
This unit has more than enough power for any home use. However, if you want to add more power to the speaker output or if you want to use another amplifier, connect an external amplifier to the PRE OUT jacks. Each PRE OUT jack outputs the same channel signals as the corresponding SPEAKERS terminals.
Notes
•When you make connections to the PRE OUT jacks, do not make connections to the SPEAKERS terminals.
•The signals output at the FRONT PRE OUT jacks are affected by the TONE CONTROL settings (see page 52).
•Adjust the volume level of the subwoofer with the control on the subwoofer (see page 52).
•Some signals may not be output at the SUBWOOFER PRE OUT jacks depending on the settings for “SPEAKER SET” (see page 85).
5
PRE OUT
SINGLE CENTER
L
R
FRONT SURROUND SUR. BACK |
1 |
2 |
|||||||||
|
SUBWOOFER |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
1 |
2 |
3 |
|
|
4 |
1FRONT PRE OUT jacks
Front channel output jacks.
2SURROUND PRE OUT jacks
Surround channel output jacks.
3SUR.BACK PRE OUT jacks
Surround back channel output jacks. When you only connect one external amplifier for the surround back channel, connect it to the SINGLE jack.
Notes
•When “BI-AMP” is set to “ON”, this unit outputs the front channel audio signals at the SUR.BACK PRE OUT jacks.
•The audio signals output at the SUR.BACK PRE OUT jacks differ depending on the “EXTRA SP ASSIGN” setting (see pages 33 and 85).
4 SUBWOOFER PRE OUT jacks
Connect one or two subwoofers with a built-in amplifier.
Note
The signal output at the SUBWOOFER PRE OUT 2 is the same as the one output at the SUBWOOFER PRE OUT 1 jack.
5 CENTER PRE OUT jack
Center channel output jack.
24 En
Connections
■ Connecting a multi-format player or an external decoder
This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND and SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or preamplifier.
If you set “INPUT CH” to “8CH” in “MULTI CH” (see page 95), you can use the input jacks assigned as “FRONT” in “MULTI CH” (see page 95) together with the MULTI CH INPUT jacks to input 8-channel signals.
Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right outputs to the left and right input jacks for the front and surround channels.
Notes
•When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 43), this unit automatically turns off the digital sound field processor, and you cannot select sound field programs.
•This unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that you connect at least a 5.1-channel speaker system before using this feature.
|
|
MULTI CH INPUT |
|
|
|
|
MULTI CH INPUT |
|
||
|
FRONT (8CH) |
CENTER |
|
|
|
FRONT (8CH) |
CENTER |
|
||
|
L |
|
|
|
L |
L |
|
|
|
|
|
R |
|
|
|
*1 |
R |
|
|
|
|
|
|
|
|
R |
|
|
|
|
||
|
SB (8CH) |
SUB |
|
|
outbackSurround |
SB (8CH) |
SUB |
|
||
outFront |
SURROUND WOOFER |
outCenter |
outFront |
SURROUND WOOFER |
outCenter |
|||||
outSurround |
L |
Subwoofer out |
outSurround |
L |
Subwoofer out |
|||||
L R |
|
R |
|
L R |
L R |
|
R |
|
||
Multi-format player/External |
|
Multi-format player/External |
|
|||||||
decoder (5.1-channel output) |
decoder (7.1-channel output) |
*1 The analog audio input jacks assigned as “FRONT” in “MULTI CH” (see page 95).
■ Connecting a Yamaha iPod universal dock or Bluetooth adapter
This unit is equipped with the DOCK terminal on the rear panel that allows you to connect a Yamaha iPod universal dock (such as YDS-10, sold separately) or Bluetooth adapter (such as YBA-10 sold separately). Connect a Yamaha iPod universal dock or Bluetooth adapter to the DOCK terminal on the rear panel of this unit using its dedicated cable.
DOCK |
VIDEO |
|
|
VIDEO |
|
|
|
|
S VIDEO |
|
IN |
OUT |
IN |
OUT |
MONITOR |
|
DVD DTV/CBL |
||||||
|
|
DVR |
|
VCR |
OUT |
||
|
PR |
A |
DVD |
COMPONENT VIDEO DTV/CBL |
|
||
|
PB |
Y |
PR |
B PB |
Y |
y
Refer to “Using iPod™” on page 68 for playback of your iPod and “Using Bluetooth™ components” on page 70 for playback of your Bluetooth components.
MONITOR OUT |
C DVR |
Yamaha iPod universal dock or Bluetooth adapter
PREPARATION
English
25 En
Connections
■ Using REMOTE IN/OUT jacks
When the components are the Yamaha products and have the capability of the transmission of the remote control signals, connect the REMOTE IN jack and REMOTE OUT jack to the remote control input and output jack with the monaural analog mini cable as follows.
FM 75Ω
UNBAL.
REMOTE TRIGGER
OUT
|
+12V |
IN |
OUT 15mA MAX. |
Remote |
Remote |
control out |
control in |
Infrared signal |
Yamaha component |
receiver or Yamaha |
(CD or DVD player, |
component |
etc.) |
Use the VIDEO AUX jacks on the front panel to connect a game console or a video camera to this unit.
Caution
Be sure to turn down the volume of this unit and other components before making connections.
Notes
•The audio signals input at the DOCK terminal on the rear panel take priority over the ones input at the VIDEO AUX jacks.
•To reproduce the source signals input at these jacks, select “V-AUX” as the input source.
VOLUME
|
|
|
EDIT |
|
CATEGORY |
|
|
|
|
ZONE 2 |
ZONE 2 |
|
|
|
|
|
SPEAKERS |
SEARCH MODE |
BAND |
A/B/C/D/E |
|
PRESET/TUNING/CH |
MEMORY |
INFO |
ON/OFF |
CONTROL |
|
|
|
|
|
|
|
|
|
|
SCENE |
|
|
|
|
|
|
|
|
|
|
|
|
1 |
2 |
3 |
4 |
|
|
|
|
|
|
|
|
|
|
PROGRAM |
|
|
|
|
INPUT |
|
|
|
|
|
SYSTEM OFF |
PHONES |
TONE CONTROL |
|
STRAIGHT |
|
PURE DIRECT |
AUDIO SELECT |
|
OPTIMIZER MIC |
|
VIDEO AUX |
|
||
STANDBY |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/ON |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SILENT CINEMA |
|
|
|
EFFECT |
|
|
|
|
|
S VIDEO |
VIDEO |
L AUDIO R |
OPTICAL |
y
•If the components have the capability of the SCENE control signals, this unit can automatically activate the corresponding components and start the playback when you use one of the SCENE buttons. Refer to the owner’s manuals for details about the capability of the SCENE control signals of the components.
•If the component connected to the REMOTE OUT jack is not the Yamaha product, set “SCENE IR” in the advanced setup menu to “OFF” (see page 109).
S VIDEO |
VIDEO |
L |
AUDIO |
R |
OPTICAL |
Video-S |
S |
V |
L |
R |
O |
Video |
|
|
Audio |
Optical |
|
output |
output |
|
|
output |
output |
Game console or video camera
indicates recommended connections
indicates alternative connections (One for the video connection, and one for the audio connection)
26 En