Yaesu SSM-14A User Manual

SSM-14A

SubmerSIble Speaker mIcrophone

The

SSM-14A

is a high-performance Submersible Speaker Microphone designed es­pecially for the STANDARD HORIZON Hand-held Transceivers. Please refer to the
STANDARD HORIZON products catalog or web site for compatibility.

:

IP57 Specication for dust protection and water submersion: 3 ft. for 30 minutes



Speaker

Push-To Talk

(

PTT) Switch

When using the

note

SSM-14A

,

turn the transceiver VOX off.

Microphone

Note: Position your mouth about 1/2”
(1.2 cm) away from the microphone
opening and speak in a normal voice.

The belt clip may be rotated

EAR (Earphone) Jack

Connect the Earphone (SEP-10) to
this jack.

Do not allow the SSM-14A to
become submerged in water

while an earbud is attached, or while
the EAR jack rubber cap is removed.

360 degrees, allowing for di­verse attachment positions.

Important note

To insure continuous water and dust proof
performance, screw the

SSM-14A

cord connector securely to the
nection on the transceiver.

coiled

MIC/SP

con-

Declaration of Conformity

We, YAESU UK LTD. certify and declare under our sole responsibility that the following
equipment complies with the essential requirements of the Directive 2011/65/EU.

Type of Equipment: Speaker Microphone
Brand Name: YAESU
Model Number: SSM-14A
Manufacturer: YAESU MUSEN CO., LTD.
Address of Manufacturer: Tennozu Parkside Building, 2-5-8 Higashi-Shinagawa,
Shinagawa-ku,Tokyo 140-0002 Japan

Applicable Standards:
This equipment is tested and conforms to the essential requirements of the directive, as
included in the following standards:

RoHS2 EN 50581:2012
2011/65/EU Art. 7 (b)

The technical documentation as required by the Conformity Assessment procedures is
kept at the following address:

Company: Yaesu UK Ltd.
Address: Unit 12, Sun Valley Business Park, Winnall Close, Winchester
Hampshire, SO23 0LB, U.K.

Disposal of Electronic and Electrical Equipment

Products labeled with the crossed-out wheeled bin symbol cannot be
disposed of as household waste.
Electronic and electrical equipment should be recycled at a facility
capable of handling these items and their waste by-products.
In EU countries, please contact your local equipment supplier repre­sentative or service center for information about the waste collection
system in your country.

YAESU MUSEN CO., LTD.

Tennozu Parkside Building
2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan

YAESU USA

6125 Phyllis Drive, Cypress, CA 90630, U.S.A.

YAESU UK

Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.

EAK07X150